Recently, car drivers have increasingly begun to upgrade their cars. The fact is that modern people are increasingly trying to stand out and want to be noticed, which is why they go to extreme measures. To date, there are many areas of tuning, all styles are very different. For example, there are styles where rust on the car body is considered beautiful. You can make rust with your own hands at no special cost, which is why this style is very popular.

In addition, it often occurs to drivers to tune technical part cars, which adds power to the motor, the car goes faster, but not all owners have the money for this, so they only do external tuning of the car. The fact is that to start tuning your car from the outside with your own hands with minimal cost You can only on those items that you need. In fact, car tuning is considered good deed not only because the driver emphasizes his individuality and shows imagination during work, but also gains experience that will come in handy later.

visual tuning

This car tuning includes changing the appearance of the car. It can be achieved in several ways.

• The first way is wrapping the body with a film. To date, there are many films with different colors and patterns. Therefore, each driver can start doing such tuning with his own hands. To start the process, you only need to buy a film and read the instructions. In addition, many companies are now engaged in applying liquid rubber to the surface of the body. In this case, the paintwork of the car does not suffer at all, and the layer can be removed at any time without any costs.
• The second way is to install various body kits and spoilers on the car. He, of course, is an amateur, because not all styles imply the installation of such details. Installing the elements on the car is not so simple, the bumpers must not only be installed, but also adjusted in size. You need to do this because the manufacturer cannot know exactly all the gaps of your car. But by installing such equipment on the car, the car will look beautiful, and the driver will gain certain skills in installing bumpers on the car. If you easily coped with this task, then you can continue to do tuning cars further.
• The next option is to install xenon lamps in the headlights of the car. After installing such lamps, the car will not only have a beautiful view, but also good light, which means good visibility in the dark. The main thing is to set up such lighting correctly, because many people simply put the lamps in their car and drive, and then they wonder why the road is hard to see, why they blind oncoming cars.

This can only be done at the station. Maintenance in a special chamber for adjusting the light.

• Another option to change the appearance of the car is to install rims. Many drivers, in addition to installing them, also paint them in different colors, which adds even more originality to the appearance of the car.
• There is another way to make the car beautiful appearance but it is no longer in high demand. It is based on setting the backlight of the bottom. A few years ago, drivers installed such a backlight on their bottom. But he lost himself, because many put lamps, which quickly broke, after which everything was removed.

Interior

Another option for tuning a car is to change the interior of the car. The fact is that it is often used cars that are tuned, and in any case, the interior in them is not as ideal as it was before.

The fact is that this section also includes the installation of music in the car. After all, if it is installed on a car that does not have sound insulation at all, then this is a waste of money, because good sound in that case, it won't work.

This section of tuning also includes interior trim and seats. Often, drivers simply cover the seats with new covers so as not to sheathe them. Many people want to be comfortable in the cabin, and they change the central panel of the car, completely alter the entire interior, including the ceiling and door cards. The most popular are embroidered diamonds on fabric or leather interior parts.

Summary

To date, there are various types of tuning, each of which has its own styles and features, which is why drivers have big choice its direction. In this modern world, young drivers are trying to improve their car and make it special, and they have many options on how to do this.

Except external tuning there is also a do-it-yourself tuning of the interior and engine. But the most common is outward change type of car. The most commonly replaced tuning element is wheel disks. Exist different types wheels, they differ not only in color, but also in the shape of the pattern.

The car for many people is not only transport, but also a means of self-expression. Do-it-yourself interior tuning involves the implementation of a number of works aimed at increasing comfort. Among other factors that affect a person in a car is the condition of the surfaces of seats, panels and other elements. The unusual coating of interior details makes it attractive for visual perception and tactile contact.

The classic is the tuning of the car interior with fine leather, which is exceptionally pleasant to the touch and look. This material is widely used for finishing the instrument panel, steering wheel and gear lever, as well as door upholstery. It is comfortable to be in such a car during long trips in any weather conditions: hot summer or frosty winter day.

This type of interior tuning is one of the most expensive, due to the high prices for genuine leather. To work with it requires special skills and special training, but the result is worth it. The machine is literally transformed and goes to a higher class. However, there are other ways of tuning the interior, which are becoming more common among car owners.

The main types of car interior tuning

One of the main reasons that encourages the driver to pump the car with his own hands is the possibility of its maximum individualization. The main types of car interior tuning:

1. Surface resurfacing using natural and synthetic materials.
2. Tailoring of covers for chairs and a sofa of the car ().
3. Installation additional equipment to ensure the comfort of the driver and passengers.
4. Installation .
5. Steering wheel tuning.
6. Noise isolation, etc.

Interior upholstery can be either full or partial. In the latter case, work is carried out on individual parts and elements: steering wheel, seats, door panels, consoles, handles and gearshift lever cover. Tuning car seats is one of the most common types of tuning, especially among car owners with a bright interior, because it fades rather quickly, shabby and every spot is in sight.

Of great importance are high-quality and original accessories for tuning the car interior, they are used to maximize the profitability of the changes. Each device and detail is carefully selected in accordance with the chosen style. Tuning a standard car interior requires imagination and ideas about the properties of the materials used. It is important to achieve the right combination of textures of mating surfaces.

Materials and accessories for car interior tuning

The standard interior of even business-class cars trimmed with expensive leather is still devoid of individuality. Modern materials for tuning the car interior allow not only to make it even more comfortable, but also to personalize it. The range includes coatings of various colors, types and prices. Widely used decorative fabric for hauling the ceiling of the car, which includes the following types:

• flock;
• alcantara (artificial suede);
• carpet;
• jacquard;
• velours.

Selection of material for self-tuning car showroom carried out based on the financial capabilities and personal preferences of the owner. Velvet faux suede, natural automotive leather or fabric should match the overall style in texture and color.

In interior decoration, carbon is often used for cars; original inserts are made from it for sheathing parts. The material is lightweight and durable like metal. For the manufacture of parts, you will need high-quality tools and work skills. In the course of car tuning, a variety of decorative designs are made with carbon fiber.

However, due to its high cost and fast fading, many car enthusiasts prefer to use imitation carbon, such as carbon look vinyl. Below in the figure you can see a mirror pasted over with "pseudo-carbon".

Some car enthusiasts prefer such a method of finishing internal surfaces as Flocking, which gives high quality coatings. The spread of technology is facilitated by simplicity and cost-effectiveness.

Do-it-yourself flocking of a car interior: work procedure and tools

Flock is a chemically treated textile, the flocked surface is velvety to the touch. Such a coating is obtained by "sticking" the flock fibers into the glue. The floccator charges the particles with an electromagnetic field and, having received an electric charge, they adhere perpendicularly to the prepared area. Flock is resistant to wet cleaning, does not fade and has a soundproofing effect.

Flocking technology can be done in a garage or home workshop. Do-it-yourself flocking of the car interior is complete or individual elements carried out using the following means:

• paint brush;
• automobile primer;
• glue of a special composition;
• color and flock;
• electric machine for applying material.

The sequence of work on flocking interior parts with your own hands is as follows:

1. The element is degreased and several layers of primer are applied. After drying, it is processed with fine sandpaper.
2. The part is smeared with glue using a wide paint brush. Apply glue without gaps and as evenly as possible.
3. Flock surface finish. To implement this process, it is necessary to use a floccator capable of covering a large area of ​​complex configuration in a short time.
4. The coating is applied without interruption and without paying attention to the fact that individual fibers do not fall into the place intended for them.
5. Excess flock is blown off with an industrial hair dryer with a cold stream of air.

Upon completion of work, the surface is dried at a temperature of 20 -22 ° C for several hours. Flock application allows you to update the interior of any car, including those with high mileage. A procedure such as constriction with artificial or natural material will help to make the salon attractive. Flocking work can be done without the involvement of specialists at home.

Do-it-yourself ceiling upholstery car interior

In cars with high mileage, many elements become unusable over time. Self-upholstery of the car ceiling opens up the opportunity to change damaged or heavily soiled upholstery. At the same time, it is important to be careful and carefully follow the step-by-step guide.

Reupholstering the ceiling of the car interior is carried out in an electrified garage box and includes the following steps:

1. Dismantling of the old coating, which is used as a template for marking the material.
2. Removing adhesive residue from the ceiling with a solvent and a brush, sanding the surface with sandpaper zero.
3. The pattern of the constituent elements and their connection to each other in such a way that the joints are invisible.
4. The covered ceiling is fixed in place using regular clamps.
5. Flocking if desired.

This process for a person with the skills of this kind of work does not take much time. It is possible to flock a newly formed surface obtained as a result of covering the ceiling. Only the operation is performed directly in the cabin, the coating must not be bent to avoid cracks. The ceiling, which has a flock coating, looks great and has good performance characteristics.

To paraphrase a well-known expression, let's say "tuning is obedient to all ages." After all, in fact, both old and young are trying to improve their car. Almost all motorists are "sick" with tuning, regardless of age and social status.

With wealthy people, everything is simple - they make a list of requirements, find a company that suits them, give the car to the masters and wait for the result. The masters themselves are sure that tuning is not done with the last money, and they take considerable financial rewards for their work. But if money is tight, and you really want to make your favorite car special, the only way out is to tune cars with your own hands.

Self-made bumper

With fairly direct hands, enthusiasm and imagination, you can do almost everything - from body kit to turbocharging. In the first case, for the manufacture of an exclusive bumper, you will need:

• mounting foam;
• fiberglass;
• epoxy adhesive;
• fiberglass putty.

It is taken as a basis native bumper, on which mounting foam is applied in the places of future overlays. It is better to reinforce it with wire or self-tapping screws screwed in with inside bumper. After the foam has completely dried, it needs to be shaped with a wallpaper cutter and sandpaper.

To make the products symmetrical, you will need to make templates. Further, the product is puttied, sanded and covered with several layers of fiberglass lubricated with epoxy. After the epoxy has dried, the surface must be sanded again, puttied with a thin layer, and after finishing with sandpaper, primed and painted.

Works inside the salon

give dashboard original and bright look will help Neon lights appliances. To make it is a couple of trifles. Would need:

• LED Strip Light;
• screwdriver;
• pliers;
• soldering iron.

We disassemble the tidy, find the native backlight lamps, instead of them we solder wires from a small piece of tape to the cartridges, glue the tape to the device body, assemble it back - and voila! The only caveat is not to confuse the polarity of the diodes, therefore, before installation, it is advisable to mark the plus and minus with different wire colors.

And again about the dashboard: you can change its shape, repair, and simply refresh it with the help of the same fiberglass or carbon fiber. Instead of foam, you can use thick, fine-grained foam. The so-called "beard" is cut out of it.

If you use carbon fiber, then you do not need to putty it. Carbon fiber on top is smeared with a layer of transparent epoxy, lightly sanded and varnished, which is desirable to polish after drying. If real carbon is not affordable, you can replace it with a self-adhesive film “carbon-like”, but, you know, the look will not be the same.

Having wandered around the shops of furniture accessories, you can find material for upholstery, filling and various inserts in the cabin. Via sewing machine and women (just kidding), you can change the upholstery beyond recognition, while furniture foam rubber laid under it in the right places will significantly improve lateral support.

Replacing the driver's and passenger's seats in the car is not difficult. Of course, you will have to work, but everything can be done with your own hands in your own garage. Regular chairs may not suit. If, for example, the driver is large enough, then the regular lateral support can rest against his sides, which does not add comfort.

To pick up new chairs, you need to take measurements from the existing ones. The width of the seat and back, their length (height), as well as the distance between the mounts are measured. It is also worth paying attention to the type of fastening itself. It may be possible to find a replacement with a similar mount.

In search of chairs, it makes sense to go to the nearest car disassembly. There is a comfortable chair, the dimensions of which are compared with the maximum allowable space for your car. The dimensions of native chairs serve as a guideline.

On a note

The chairs have a base on which they can move back and forth. Therefore, you need to buy chairs with skids. Most often, skids are bolted to the bottom of the car.

The skids from another car model may not match the mounting holes (studs) on the bottom, and most often they do. In this case, there are two ways to solve the problem. The first is to drill other holes in the bottom, marked for new skids. In this case, it is imperative to plug the previous holes with short bolts or rubber plugs, which can be made independently from silicone sealant.

The second way is to make adapters that will be attached to the bottom through the old holes, and on top - have studs for attaching the new sled. This method allows you not to drill extra holes in the bottom, but you will have to order adapters from a locksmith, having made a technical drawing in advance.

You can also make soundproofing of the body yourself. Having disassembled the doors and the interior, we arm ourselves with glue and vibroplast and glue them from the inside. Special attention should be paid to the doors - they not only need to be glued from the inside, but also to close unused technological holes. This will give the effect of a closed acoustic space and improve the sound of the speakers.

On a note

For better insulation, the perimeter of the door card also needs to be sealed with bitoplast. This material seals the joints, while it is very convenient for use in such places.

Optics can be equipped with "angel eyes". To do this, you need to bend a transparent tube from the blinds along the inner perimeter of the headlight, highlighting it from the ends and in several places in the middle with LEDs. The finished product is fixed inside the headlight, connected to the dimensions, the headlight is assembled on a transparent sealant and put in place.

Doing it yourself, it's hard to resist the temptation to "chem" something with the engine. Replace the pot air filter on a "turtle" with a zero, even a person far from technology can do it. Additionally, the air intake will help to facilitate the “breathing” of the engine and improve its airflow. True, for its manufacture you will need skills in working with a grinder and semi-automatic welding.

What can be done as part of technical tuning?

Technical tuning includes engine, transmission and suspension upgrades. To undertake any of the above, it is necessary, first of all, to have sufficient technical knowledge. Therefore, you should not climb into the same motor with your own hands, in order, for example, to replace pistons, connecting rods or camshafts, without experience.

At the same time, you can improve the performance of the motor without completely disassembling it. We are talking about the so-called chip tuning. To do this, you will need to contact specialists who have software and a connector for connecting to your car's ECU.

In principle, nothing complicated in flashing electronic block there is no control, especially since on the Internet today you can find many instructions for installing the program. The problem is only in the connector, which makes no sense to purchase for one-time use.

On a note

It is better not to buy cheap Chinese connectors (adapters), as they may cause problems during the installation of a new firmware. This, in turn, will lead to the fact that the ECU will have to be given to resuscitation by qualified specialists.

A proprietary connector costs an order of magnitude more expensive than a Chinese one. But on the other hand, having this device is very profitable - at any time you can connect the car to a laptop and read all the errors or install a new firmware. Having performed these operations once, you can no longer use the services of servicemen.

In the suspension with your own hands, you can do the following: change the springs and struts, install air springs, reduce or increase the clearance. These operations are purely assembly operations that do not require engineering skills. However, before performing any of them, you must carefully study the materiel and follow the recommendations.

Many of us become very attached to our cars, but after a few years they easily part with them, acquiring new car. Someone, on the contrary, is not ready to part with his car and exploits it for many more years. But there is a certain part of motorists who are not only not ready to change their car for another. Such people are unstoppable fans of a certain make and model of cars.

Such drivers most often try to improve their vehicles by upgrading the chassis, engine or appearance. As a rule, for this, most motorists turn to specialized studios so that professionals can carry out cardinal work on the car. But there are also motorists who do not want to contact expensive tuning studios, but.

What comes out of this and how cars surprise on the roads, we propose to find out today in our review of the most amazing tuning cars that have been upgraded either on their own or with the help of a small garage service.

Opel Corsa: LSD

Tuning Corsa with amazing airbrushing and "scissor" doors that repeat the type of doors Lamborghini cars. As you can see, in addition to the body, the modernization also touched on the engine compartment.

Suzuki Swift: Forgotten Japan

Japanese cars don't get private tuning that often, especially when it comes to regular cars. For example, this Swift car has received a radical upgrade, both in appearance and interior.

VW Vento: Camouflage or...

Incomprehensible self tuning. I wonder what the owner of the car pursued? What did you want to highlight? At first glance, the style repeats that are in a car junkyard. But upon closer examination, it becomes clear that the car has a protective military camouflage tuning for guerrilla warfare.

Peugeot 206: Crazy colors

Pay attention to which way the car doors open, as well as the monitors built into them. This car 206 is a great example of how any car can be remodeled. Despite the brightness and some shortcomings, this car is able to attract a lot of attention on the road.

Mercedes: Lifting

Could the creators of this model in the early 60s have assumed that this could be done with a classic car? fans classic cars German mark, most likely, are ready to bring down a lot of criticism on this tuning. But we think that young people will like this option of modernization.

Seat Ibiza: Ready to fly

Not only does the tuning betray the Ibiza with a rich and chic exterior style, but the modernization has touched more than just the exterior. Private specialists managed to boost the engine by increasing the power to 220 hp. (VR6 from VW Golf III).

Suzuki Super-Carry: Audio tuning

The machine, apparently, was created for those who love music at high decibels. This is evidenced by a huge speaker in the cockpit next to the driver's seat. I wonder if you turn on the music at full volume, the driver will be able to stay behind the wheel?

Nissan Skyline GT-R: Ready to surprise

Unusual upgrade Skyline GT-R.

Opel Tigra: Pink in fashion

Who said pink is for girls? Combined with the matte black body paint, the pink accents look amazing.

Mitsubishi Lancer Evo: The cry of the soul

A few more pinks.

Renault Twingo: A new angle

Slovenian private tuners made a serious bid to have their tuning become the best by the end of 2014. Note how the car doors have been redesigned.

Peugeot 106: Dream to be big

This has been expanded wheel arches to install big rims and serious tires.

Mazda RX-8: Alien

Tuning from Switzerland. Private masters forced to take a fresh look at the RX-8. Pay attention to the rear unusual doors.

Audi TT: More than just tuning

Blimey. When you see this unusual TT, you understand, despite the fact that the tuning was done in a garage, the level of skill of the tuning creators is at the highest level.

VW Golf II: Forester

Another car, which, apparently, was created for camouflage in the forest.

Mercedes SLK: Fire of Passion

Not only the color of the car says that there is no need to mess with it on the road, but the headlights also scare away lovers of curious looks. Highly .

Peugeot 206 CC: Changing view

Unlike a production convertible, this car, modified by a private craftsman, boasts the best ideas.

Smart: N.L.O.

Do you believe in unidentified flying objects? Here is confirmation that they are among us.

Volkswagen: Who is prettier?

Choose for yourself which car you like best. On the left is Carrado. On the right is the first generation Scirocco. Notice the engine bays in both cars, which are squeaky clean.

Ford Fiesta: Disguise

If we had not written what this tuning model was, then many of you would not have immediately identified what it was. Note the darkened headlights, which, like sunglasses, set off the bright interior and unusual body color.

VW Corrado: Rare Model

Very rare old model German company. The mirrored hood allows everyone to see in more detail about all the details of the engine.

Opel: Slippers and more

A complete tuning kit for car lovers.

VW-Golf: A peculiar way of looking at things

Unusual tuning of a popular car. Apparently, the author of the modernization was inspired by the style of an SUV for tourist trips.

BMW: Super trailer

An amazing tuning not only for the car, but also for the trailer, which is made from a real 3-series station wagon car.

It has long and firmly entered into the everyday life of most motorists. With a fairly free translation, in relation to a car, this concept means setting certain elements or characteristics in accordance with one's own tastes and preferences of a particular car owner. It does not matter here the amount of work performed, the complete or partial re-equipment of something, because in this case, everything depends on requests based on material capabilities.

Salon tuning

Modern car tuning aims not only to stand out from the crowd and emphasize your individuality, but also to provide for yourself and passengers additional amenities and comfort. Among all the measures to improve and comprehensively refine the entire car, interior tuning occupies a special place.

Good interior tuning will make trips much more comfortable

This is primarily due to the fact that during trips of any duration, the driver and passengers spend most of their time inside the car, in its cabin. In addition, ultimately interior decoration interior should be in harmony with external design vehicle and its equipment.

Types of tuning

As practice shows, tuning the interior of a car is a rather complicated undertaking. The interior of any car is a set of elements, parts and accessories for various purposes, therefore, it is extremely important to observe and maintain a certain general style. Since the instrument panel is the most important element of the interior, all transformations begin with it.

Video with interior tuning options:

First of all, the devices themselves are subject to refinement, by replacing the scale or optimizing the backlight. The most troublesome thing is replacing the instrument panel with another part, from a more expensive and prestigious car brand. The most exclusive option is the hand-crafted, custom-made instrument panel. This is the most expensive and time-consuming method, which only a few qualified specialists can do.

Flocking

Solving the problem of how to make interior tuning, you should focus on flocking. This is one of the modern types of interior design, when instead of smooth surfaces a velvet, velor or suede coating is formed. This effect is achieved by applying small fibers or flock located in an electric field, due to which they become perpendicular to the base to be coated. Flocking, carried out in a continuous layer, gives, in the end, a uniform fleecy coating. With selective coating, a pre-planned pattern is formed. In addition to the decorative function, flocking, due to the properties of the material itself, plays the role of heat and sound insulation, protection against ignition, prevention of condensation, and so on.

Most often, after the instrument panel, vehicle controls are upgraded. In the first place here is steering wheel, which varies in a variety of ways, up to its complete replacement on a sports steering wheel of a smaller diameter. Steering wheel sheathing is often used with various materials. However, it must be taken into account that all manipulations with the steering wheel in no way affect traffic safety.

As a rule, native seats are simply replaced by other, more prestigious ones that can be installed in your own cabin. A more expensive option is to purchase sports-type chairs from well-known models.

In accordance with the general style of the cabin, such interior elements as the ceiling, floor, upholstery of the front and rear doors. At the same time, in parallel, work is being carried out on and installation of additional columns. At the same time, it is possible to replace standard interior lighting devices with more advanced ones, in the form of

Finally, tuning native car will bring tangible benefits and will bring great pleasure every day.

• News
• Workshop

Demand for Maybachs has risen sharply in Russia

Sales of new luxury cars continue to grow in Russia. According to the results of a study conducted by the AUTOSTAT agency, following the results of seven months of 2016, the market for such cars amounted to 787 units, which is immediately 22.6% more than in the same period last year (642 units). The leader of this market is the Mercedes-Maybach S-Class: this...

Datsun cars became more expensive immediately by 30 thousand rubles

We note right away that the rise in price did not affect the cars assembled last year. Last year's on-DO sedan and mi-DO hatchback in basic versions, they are still offered for 406 and 462 thousand rubles, respectively. As for cars manufactured in 2016, now you can’t buy on-DO for less than 436 thousand rubles, and now dealers are asking for 492 thousand for mi-DO ...

In the traffic police of Moscow there was a stampede of those wishing to appeal the fine

This situation arose due to the large number of fines issued against drivers in automatic mode, and the short time to appeal receipts. Pyotr Shkumatov, coordinator of the Blue Buckets movement, spoke about this on his Facebook page. As Shkumatov explained in a conversation with an Auto Mail.Ru correspondent, the situation could arise due to the fact that the authorities continued to fine...

New sedan Kia will be called Stinger

Five years ago at the Frankfurt Motor Show, Kia unveiled a concept Kia sedan GT. True, the Koreans themselves called it a four-door sports coupe and hinted that this car could become a more affordable alternative to the Mercedes-Benz CLS and Audi A7. And now, five years later, the Kia GT concept car has transformed into the Kia Stinger. Judging by the photo...

MAZ created new bus especially for Europe

This model was originally created for the EU countries, the press service of the Minsk Automobile Plant notes, therefore it is maximally adapted to the requirements of local carriers. MAZ-203088 is equipped with units familiar to European mechanics: a 320-horsepower Mercedes-Benz engine and a 6-speed ZF automatic. Inside - new workplace driver and interior: all protrusions and edges of rigid structures ...

GMC SUV turned into a sports car

Hennessey Performance has always been famous for its ability to generously add additional horses to a “pumped” car, but this time the Americans were clearly modest. GMC Yukon Denali could turn into a real monster, fortunately, that the 6.2-liter "eight" allows you to do this, but the mechanics of Hennessey limited themselves to a rather modest "bonus", increasing the engine power ...

In Russia, the volume of road construction has sharply decreased

The reduction in the reconstruction of Russian federal highways and the commissioning of new facilities is due to budget cuts and the unsatisfactory work of general contractors. This was announced by the head of the construction and operation department highways Federal Road Agency (Rosavtodor) Timur Lubakov, Izvestia reports. As Lubakov explained, initially this year, after construction and reconstruction ...

Named average price new car in Russia

If in 2006 the weighted average price of a car was about 450 thousand rubles, then in 2016 it was already 1.36 million rubles. Such data are provided by the analytical agency Avtostat, which has studied the situation on the market. Like 10 years ago, the most expensive Russian market remain foreign cars. Now the average price of a new car...

Mitsubishi will soon show a touring SUV

The abbreviation GT-PHEV stands for Ground Tourer, a travel vehicle. At the same time, the concept crossover should proclaim "Mitsubishi's new design concept - Dynamic Shield." power unit The Mitsubishi GT-PHEV is a hybrid setup consisting of three electric motors (one on the front axle, two on the rear) to...

Coupe Mercedes-Benz The E-class was noticed during tests. Video

Video featuring new Mercedes-Benz The E Coupe was filmed in Germany, where the car is undergoing final testing. The video was posted on the walkoART blog, which specializes in spy footage. Although the body of the new coupe is hidden under protective camouflage, it can already be said that the car will receive a traditional appearance in the spirit of Mercedes sedan E-class...

WHAT car to buy for a beginner, what car to buy.

What car to buy for a beginner When the long-awaited driver's license is finally obtained, the most pleasant and exciting moment comes - buying a car. The auto industry vying with each other offers customers the most sophisticated novelties and it is very difficult for an inexperienced driver to do right choice. But often it is from the first ...

The most expensive car in the world

There are a huge number of cars in the world: beautiful and not very, expensive and cheap, powerful and weak, our own and others. However, there is only one most expensive car in the world - this is the Ferrari 250 GTO, it was produced in 1963 and only this car is considered ...

Test of four sedans: Skoda Octavia, Opel Astra, Peugeot 408 and Kia Cerato

Before the test, we can safely say that it will be "Three against one": 3 sedans and 1 liftback; 3 supercharged motors and 1 aspirated. Three cars with automatic and only one with mechanics. Three cars are European brands, and one is ...

What car colors are the most popular

Compared to reliability and technical specifications, the color of the car body is, one might say, a trifle - but a trifle is quite important. Once upon a time color scheme Vehicle was not particularly diverse, but these times have long since sunk into oblivion, and today motorists are offered the widest ...

HOW to choose a brand of car, which brand of car to choose.

How to choose a car brand When choosing a car, you need to study all the pros and cons of the car. Look for information on popular automotive sites where car owners share their experiences and professionals test new products. After collecting all the necessary information, you can make a decision in ...

Which cars are the safest

When making a decision to purchase a car in the first place, many buyers pay attention to the operational and technical properties cars, its design and other paraphernalia. However, not all of them think about the safety of the future car. Of course, this is sad, because often ...

luxury cars of stars

luxury cars of stars

Celebrity cars must match their celebrity status. It is simply impossible for them to come on something modest and publicly accessible. Their vehicle must match their popularity. The more popular the person, the more refined the car should be. Worldwide Stars Let's start this review with...

How to choose a used car There are a lot of people who want to buy a car, but not everyone has the opportunity to buy a brand new car in the showroom, which is why you should pay attention to used cars. Their choice is not an easy task, and sometimes, in order to...

HOW to choose and buy a car, Buying and selling.

How to choose and buy a car The choice of cars, both new and used, on the market is huge. And not to get lost in this abundance will help common sense and a practical approach to choosing a car. Do not give in to the first desire to buy the car you like, carefully study everything ...

• Discussion
• In contact with