Although the VAZ 2109 is an outdated model, there are still many such cars on our roads. Every owner wants to make his car unusual and unique. Nine is often tuned, as it is reliable, simple and beautiful car. You can contact a car service and specialists will perform tuning, but most motorists do everything with their own hands.

Tuning VAZ 2109 do it yourself

VAZ 2109 is distinguished by reliability, endurance, but its appearance and some specifications already outdated. To correct these shortcomings, it is enough to tune the car. If you tune a car with your own hands, then you can act in the following directions:

• driving characteristics: engine, suspension, brake system, gearbox;
• appearance: body, optics;
• salon.

Photo gallery: tuned nines

A convertible is made from the VAZ 2109, but it is very expensive and difficult Full or partial tinting of the headlights is carried out The panel is installed from more modern model or from a foreign car The easiest and most affordable type of tuning is window tinting Installing a modern plastic bumper The car is completely repainted in a brighter and more beautiful color One of the tuning options is airbrushing Spoiler protects rear glass from dirt Shorten the springs to make less clearance Doors are made so that they open up, not to the sides

Engine

In order for the car to feel confident on the road, and also not to be inferior to other cars at the start, it is necessary to improve its engine. Before that, it is necessary to upgrade the brake system and gearbox, only in this case you will be able to drive not only quickly, but also safely.

By tuning the VAZ 2109 engine, it is possible to increase its volume to 1.7 liters. You should not increase it anymore, as the motor will start to overheat and quickly fail.

Refinement of the engine consists in installing the following parts:

• lightweight crankshaft;
• forged pistons coated with molybdenum disulphide;
• lightweight connecting rods;
• piston pins with conical chamfers.

In addition, you can replace the standard cylinder head with a head from Lada Kalina. The existing motor mounts are changed to reinforced ones and the camshaft is being replaced. As a result of such modifications, the car becomes more playful and powerful. It is capable of accelerating to 180 km / h, and the power is 98 liters. With. If the model is carbureted, then jets with a higher throughput are installed in the first and second chambers. In injection models, a January 7.2 controller is installed to control the motor.

Video: finalization of the cylinder head

Chassis

The suspension allows you to soften the shocks to the body that appear during movement. Not only the comfort of movement, but also safety depends on its work. The car must feel confident on the road, and also tolerate hitting pits and bumps well. The suspension helps dampen shocks, hence extending the life of the car body. Tuning the VAZ 2109 suspension allows you to improve its characteristics, therefore it is relevant and in demand.

You can improve the chassis as follows:

• replace shock absorbers with gas-oil ones. It is recommended to buy shock absorbers and springs as a set. For stock springs, Monroe and Plaza sport shocks will do. For aggressive trail riding, Koni Sport or Bilstein Sport shocks are more suitable. To improve car handling, it is enough to put Monroe Gaz-Matic or Plaza;
• install stabilizer roll stability from the VAZ 2110. This will reduce roll when cornering and the car will move smoothly when shaking the steering wheel at speed. There is an opportunity to take turns at a higher speed. Although the anti-roll bar from the VAZ 2110 is only 2 mm thicker than from the VAZ 2109, this affects the stability of the car significantly;
• create negative camber by increasing the pitch angle to improve handling;
• shorten the springs to lower the car. This solution allows you to reduce the clearance of the car. It is recommended to shorten the front springs by no more than 1.75 turns, and the rear springs by 1 turn. If you shorten it more, you need to limit the suspension rebound, that is, use a garter. It is necessary so that the spring does not jump out of seat, and is carried out using steel cables;
• install polyurethane bushings of levers. Such parts are more reliable and durable, so you have to replace them less often;
• install additional stiffeners by connecting the upper shock absorber supports. The rigidity of the body increases, and the car behaves better during cornering.

improvement brake system car is as follows:

• replacing the rear drums with disc brakes;
• installation of a pair of disk-caliper bigger size;
• replacement of the main brake cylinder. This must be done with the mandatory implementation of the two previous options, since the regular cylinder will not be able to cope with the task.

Appearance of the car

There are many options for tuning the body, but here you need to feel the measure so as not to turn the car into a Christmas tree or a painted monster. With the right approach, you can make the body beautiful and unique.

Body tuning options VAZ 2109:

• the upper spoiler allows you to protect the rear window from dirt and performs a decorative function. It can be seen on most ordinary nines, but the practicality of such tuning is low, and the appearance is “not for everybody”;
• forged or alloy wheels not only change the appearance of the car, but also reduce the load on the hubs due to the low weight;
• side mirrors in the body color of the car look stylish and beautiful. To increase visibility, it is recommended to install larger mirrors with aspherical inserts;
• hammerless type door handles. It is more convenient to use such handles and their appearance is more attractive compared to standard VAZ 2109 door handles;
• decorative overlays on arches and thresholds. This is not only an option for decorating a car, but also a way to hide the rust that has appeared, since it is the sills and wheel arches that are damaged most quickly;
• aerodynamic skirts. With their help, owners are trying to improve the aerodynamic performance of the car. Experts confirm that the effectiveness of such tuning is small, since these elements begin to work only at a very high speeds, but as a decoration - this is a great option;
• deflector on the hood, it is also called a fly swatter. It allows you to redirect oncoming air flows and protect the front of the hood from gravel and sand. Windshield protected from small pebbles and insects, as they are carried away by the air flow;
• antennas, air intakes and their simulators, slots on the hood. These elements do not carry a practical purpose and act only as decorative ones;
• various stickers.

Salon

The interior of the nine was developed in the last century, so today it cannot be called a model. To make it more modern, there are many tuning options. Don't forget that it's ugly when external tuning The car is made very high quality, and when you open its doors, you see a worn interior. The following interior changes can be made with your own hands:

• additional sound insulation helps to make the car more comfortable. To protect the interior from external noise, an additional gluing of the partition separating the engine from the interior, bottom, doors, engine compartment. For this, a special soundproofing material is used, the thickness of which is 1.5–2 mm. It is made from butyl rubber composite sealant. The material has an adhesive layer, with which it is attached to the car body;
• installation of a new dashboard or installation on an old special lining. There are overlays designed for both high and low panels of the VAZ 2109. They are installed on top of the standard panel and improve its appearance. Can be completely replaced dashboard, for this they use panels from newer VAZ models or foreign cars;
• replacement of trim and door cards;
• installation of seats from foreign cars or upholstery of existing seats;
• steering braid, gearshift lever knob;
• pedals, sun visor, armrest;
• interior lighting.

Video: interior tuning

Lighting system

The factory lighting system of the VAZ 2109 is quite good, but it does not have a very attractive appearance. The problem of the headlights offered for replacement is their low quality, so you need to carefully make a choice. Having bought and installed low-quality, but beautiful headlights, you will significantly worsen the lighting, and this negatively affects traffic safety. The lighting system can be modified as follows:

On the taillights, the plastic often becomes cloudy, which degrades its appearance and lighting quality. To fix the problem, you can buy new plastic, but it can be enough to polish the one that is. This will improve the appearance of the lights and the brightness of the lighting, which makes the car more visible at night and in fog.

Video: taillight tuning

Tuning the door system, trunk, rear shelf

Changing the VAZ 2109 door system not only makes it more attractive and facilitates the operation of the car, but also reduces the likelihood of its unauthorized opening. Such tuning consists in installing power windows and central locking.

With the improvement of the trunk, you can put an electric lock on it, and remove the standard factory lock. In this case, it will be opened with a button from the passenger compartment and uninvited guests from the outside will not be able to get into the trunk.

The rear shelf separates the trunk from the passenger compartment. You can install speakers in it. The standard shelf is rather weak, so it is usually changed to a reinforced one that can withstand more weight. You can purchase a finished shelf or make it yourself from thick plywood, chipboard.

There are many ways in which you can improve both the appearance of the VAZ 2109 and its technical characteristics. It all depends on the funds that the owner is willing to allocate for car tuning, and on imagination. The main thing is not to overdo it, so you need to observe the measure. Otherwise, when tuning a car, you may not improve, but worsen its appearance and technical performance, and your car will be called the insulting word "collective farm".

The bumpers of the VAZ 2109 car are famous for their fierce durability. Also, a feature of the protective elements of the Lada "nine" is a characteristic appearance. Chopped rectangular shapes and black color are not to be confused with another model.

But the time comes when replacing the bumper on the VAZ 2109 is simply necessary. When driving on Russian roads over the years, the protection still becomes unusable. Or the driver gets bored with the shape of the base part and wants to replace it for aesthetic reasons. Alternatively, they use the VAZ 2114 part or resort to tuning. In any case, you will need to remove the front and rear bumpers. It is easy to do this even in your own garage. Consider the sequence of actions, the reasons for dismantling and tuning methods.

Reasons for removing a part

Drivers of the "nine" carry out the dismantling of the front and rear protective elements in such cases.

1. Replacing the VAZ 2109 bumper with the same (basic) one due to heavy wear or breakage.
2. Installation of a new, more beautiful, protective element.
3. Uplift.
4. Body painting or straightening (with the subsequent installation of the protective element back).
5. Removal of the radiator, repair of lighting devices.

In the first case, the protection is removed, because it has become unusable. Driving without a VAZ front bumper not only disfigures your car externally, but also leaves body elements and engine cooling systems unprotected. The same situation with the rear bumper: without it, Lada does not look full, and the body, muffler and rear suspension are under threat. Therefore, it is necessary to remove the damaged part and replace it with a new one. The factory element for BA3 2109 can be purchased everywhere in car dealerships.

When a replacement is made for the purpose of decoration or bumper tuning is performed, the driver removes the protection and looks for a new one to taste. There are many options for understated and massive racing elements on the market. Some people prefer to equip the "nine" with bumpers from its "successor" - Lada 2114. This is not the best step, because you have to tinker with the installation. The mounting holes are a little off-match with those on the 2109. Also, the rounded exterior shapes of the 2114 don't exactly match the chopped style of the 9.

You will have to remove the factory part if you decide to completely repaint the body. After all, part of the body is under the bumper. Also, dismantling is necessary to get to the radiator and headlight wiring. In case of failures in the engine cooling system, there are times when you need to remove the radiator. In addition, from the factory, all “nines” have a gap between the protection and the body (sagging), and many believe that such a solution spoils the appearance.

Motorists independently perform bumper lifting. This procedure involves cutting off the top edge. Not everyone can do this work with their own hands, and if you are not sure that you can cut the layer evenly, contact the experts.

We carry out the removal of the front and rear bumper ourselves

To remove the protective element, you need to drive into the viewing hole. After all, you have to unscrew the fasteners under the car. For dismantling, you will need the following tools:

• ratchet and a set of heads;
• cap wrench 13;
• cross screwdriver.

If you are not dismantling for the purpose of repairing the headlights or the body, the lighting devices themselves can not be removed. How to remove the front bumper "nine"? First, unscrew the two bolts of fastening to the front lockers (fender liner). This is done with a head of 17. Next, unscrew two more bolts, which are located on inside, and connect the bumper to the body bracket. You need a 10 head.

Then you need to pull out the bracket fastening studs and disconnect the fastening from the protection. If you want to remove the part along with the brackets, you need a 13 wrench. Unscrew the two nuts securing the front bracket to the body. After unscrewing the three screws to remove the side bracket.

If you have a VAZ 2108 model before 1985, then the dismantling is slightly different. You must first unscrew the nuts from the side members, then the mounting bolts front fender at both sides. Next, we hook the protection, pull it towards ourselves and remove it. The rear protection is also easy to dismantle. If you are painting, remove the license plate and taillights separately.

The wiring coming from the numbers and headlights must be disconnected in any case, regardless of the reason for dismantling.

How to remove the bumper from the stern of the VAZ 2109? Using a 17 head, first unscrew the lower bolts rear mount. Next, you should dismantle two side mounting bolts on each side. Remove the pins from the side brackets. Then, using a 13 key, unscrew the two nuts securing the brackets.

Behind the design also includes a cross beam. It is attached to the facing of the protective element with eight bolts. We unscrew them with a key of 10 and remove the strips that secure the beam. rear bumper dismantled.

The exterior design of the VAZ 2109 car is changed by many car owners in order to make this model truly unique and interesting. There are quite a few different ways to change the appearance of a car, among which some allow you to significantly transform the design, others help to complement the style. Tuning is selected for the VAZ 2109 bumper, taking into account the fact that this element of the car largely changes the exterior design.

From the moment the car appeared on sale, the owners had a desire to change it. A similar desire was manifested by a change in the type of bumper, as well as the type of material used in its manufacture. Initially, it was simply repainted in a different color, but the result obtained determined the low popularity of this method. At the same time, the mistakes made led to the fact that the paint coating quickly fell off with a significant impact during movement: gravel, dirt, low and high temperatures.

Buying a ready-made tuning option

The demand for car tuning kits has determined the emergence of a fairly large number of companies that specialize in their production. That is why car owners can purchase ready-made which can be very different.

Features of this offer include:

• It is not necessary to carry out the creation of the design of the future bumper, the choice is made according to the presented photographs.
• The quality of the finished bumper is good, the painting is carried out in accordance with the established requirements.
• Mounting will be carried out as a standard bumper.
• In the manufacture of modern materials are used.

Such an offer is quite attractive, but requires significant investment. There is also a possibility that a similar bumper will be acquired by another owner of a similar car in the city. Headlights on the VAZ 2106 tuning can also often be bought from similar sellers.

Bumper from VAZ 2114

A popular way to change the exterior of the car in question is to use the bumper of another model. For example, a bumper from a VAZ 2114 is quite often installed on the car in question. But at the same time:

1. Exterior design will be underdeveloped.
2. In order for the bumper to hold securely, you will have to refine it.

However, you can find a used bumper from another car for a small price, and the changes made will be significant.

Should the bumper be raised?

Many owners note that the standard gap between the body and the bumper significantly spoils the appearance of the car. This effect is called bumper sag. If you eliminate this effect, you can significantly improve the appearance. The process of raising the bumper is laborious, as it requires their complete dismantling, trimming the upper part. It is quite difficult to change the upper part with the formation of an even cut. For this you need to have a special tool.

Applied tuning methods

If there is a desire to carry out the creation of which will significantly change the appearance of the car, then first you need to decide: the old one will be finalized or a new one will be created. When creating a new bumper, note:

• It is necessary to perform work with high accuracy, for which you need to have special measuring tools.
• It takes a lot of free time to do the job.
• Without experience in the field of creating parts for a car, you should not count on a quality result.

When creating a bumper, you should Special attention pay attention to the strength of the connecting elements. When designing, the location of standard fastening elements on the body is taken into account. Basically, flanges that are adjacent to the body are used as a fastener. In places where the flanges fit, bolts or self-tapping screws are screwed in. A situation may arise when it is necessary to create additional fastening elements, which greatly complicates the task.

Sidebar: Important: Reworking a stock bumper is the most common option. This is due to the fact that upgrading an already finished bumper is much easier than creating a new one.

The work is to add new elements:

• Holes. Creating holes allows you to significantly change the design of the bumper. An example is the oval holes in the lower part of the structure, which resemble places for installing fog lights of foreign cars.
• Shape change. It is quite difficult to change the shape, but by doing such work you can transform the bumper beyond recognition. The shape change is carried out by heating the plastic, as well as building it using certain materials.
• Installing the skirt various shapes. Over the years, it is skirts that can largely transform a car. When using them, the landing of the car visually becomes lower. Low landing characteristic sports cars.
• Installation of air intakes. This element of the bumper is characteristic of sports cars. Creating an air intake on your own is quite difficult, since for this you need to cut out niches, install a special mesh, and much more.
• Length extension. You can increase the aggressiveness of the appearance of the machine by increasing the length, for which special materials are also used.

Even with a serious change in the standard version, its basis remains unchanged. This moment determines that the mount passes through the factory mechanisms. Another important issue is what material to use when tuning. Given the huge amount of tuning work being done, we can say that building foam and polystyrene are the most popular materials. They are cheap and easy to handle.

You can change the shape and size of the foam using conventional tools. Building foam quickly hardens, it is also represented by an easily processed substance. At the same time, the design does not gain weight, which determines a small load on the mount.

Video tuning front bumper VAZ 2109

One of the ways to make your car stand out is tuning. Changing the appearance of a car begins with a body kit. - a simple operation that significantly changes the appearance of the vehicle.

Changing the design of the body kit is done in order to improve the appearance of the part, and the car as a whole, and to give additional options. Installed on a tuned body element additional devices lighting, and air ducts to protect the engine from overheating. Changing the buffer VAZ 2109 is carried out according to the following methods:

1. Painting or wrapping. To tune in this way, you will need to carry out preparatory work and change the color of the part. To do this, use paint or a special film (for example, carbon).
2. Installing a part from another machine. As a rule, they put spare parts from the VAZ 2114. Installation causes some difficulties, since the attachment elements of the body kit from a newer model are not suitable for installation on a nine. The buffer from the fourteenth, on the VAZ 2109, looks alien, since the smooth lines of the body element do not combine with the chopped body shapes of the ninth model.
3. Use of ready-made body kits. This type of tuning is the easiest to implement. The driver needs to select the element he likes and install it on the car. Body kits for VAZ are equipped with sets of overlays for wings, sills, and spoilers.
4. Soldering and gluing a standard buffer. Change the shape and appearance of the part. Added new decorative elements. On the VAZ 2109, objects with material are installed abs plastic. When soldering or gluing, use the same type of plastic.
5. Installation additional equipment. The object is equipped with headlights, air ducts.
6. Creating a new body kit. A new body element is constructed from fiberglass. The imagination of the car enthusiast is not limited by anything.

After making changes to the body kit design (except for painting and pasting), they must be registered with the traffic police.

Depending on the chosen tuning method, the tools and materials needed for the job differ:

1. For pasting and repainting, you will need a degreaser, grinder and sandpaper, putty, spatula, spray gun, rags, primer.
2. To reinstall the body kit, you will need a part from another car, a set of tools, rags, a metal brush.
3. Pre-purchased tuning buffer, tool kit, rags.
4. Composite adhesive, powerful soldering iron, metal mesh, staples, building hair dryer.
5. Fiberglass, epoxy resin, building foam, polystyrene or technical plasticine, construction tape, sharp clerical knife with replaceable blades.

Preparatory work

Before starting work, the buffer is removed from the car body. The dismantled part is thoroughly washed and dried. The polishing machine removes the paintwork. Degrease. Inspect the buffer for chips, dents and cracks. Eliminate these malfunctions, putty.

When grinding, after removing each layer of paint, the place is degreased.

The process of making a new bumper

The process of preparing the part for work is somewhat different. You will need to remove the stock body kit. It will be used as the basis for the new part. Paste the body element with construction tape. Apply fine-grained mounting foam, plasticine or polystyrene. It is necessary to create a single monolithic block from this material. To create and reshape the new bumper, you will need a sharp knife. With its help, the main lines of the product, air ducts, niches for fog lights and a license plate are formed.

After applying the foam, it should dry well.

After shaping the future product, a layer of fiberglass is applied to the polished base. At the same time, they try to avoid the appearance of folds and air bubbles. A layer of epoxy resin is applied to the glass canvas. The procedure is repeated 3-5 times. The parts are allowed to dry, polished, defects and irregularities are eliminated with putty, sanded again, primed and painted. After drying paintwork, the product is installed on the car.

When working with epoxy and fiberglass, it is recommended to use protective gloves and a respirator.

Improved stock bumper

To give the regular car bumper a more attractive appearance, or to subsequently equip the part with additional components, the body kit is tuned.

This process is done by gluing and soldering. You need to stock up on a body kit-donor. It is important that the type of plastic of the standard object and the donor match. After forming the parts and elements to update the buffer, they are soldered together with a powerful soldering iron. To give the structure strength, it is reinforced with metal elements. Instead of sealing, you can use gluing two or more components of the future body kit. After applying the adhesive, the resulting structure is dried using a building hair dryer. Further, it is polished, defects are eliminated with putty, polished, primed, painted and installed on a car.

The tuned car looks stylish and aggressive. In the modernized buffer, they put, and instead of the thresholds, they install skirts created in the same way as the buffers.

Features tuning bumpers

Buffer and classic models VAZ. So the 2105 and series, and the newer 2108 and 2109 are different.

VAZ 2105-07

And other models of the classic family is to purchase and install a modified body kit (rear and front bumper can be designed by yourself), or installing overlays on the part. Additional fog lights are mounted along with buffer pads. In the same way, the bumper is tuned on a VAZ 2106 car.

Also on models 2107, 2106, 2105, tuning consists in dismantling the body kit. To do this, remove both the body element and the bracket mounts.

VAZ 2108-99

The standard body kit of the nine is often subject to change. Bumpers on the VAZ 2109 are tuned for many reasons: due to sagging of the element, unpresentable appearance, or insufficient strength. On VAZ 21099, 2109 and 2108 cars, front and rear body kits are tuned.

The changes help to solve the problems of regular car bumpers. To give an unusual appearance to the car, body kits are installed from other models. So at nine they put buffers from the fourteenth model. The disadvantage of this solution is the mismatch of attachment points, and a somewhat inharmonious combination car body and body kit.

Tuning a car, many start with changing the design of the bumper. This step allows you to make the appearance of the car more attractive, and endow the body element with additional devices. A car with an unusual bumper attracts the eyes of passers-by and other drivers.

The official name of the VAZ 2109 car is Lada Sputnik. Known to every representative of the older generation in our country, the VAZ2109 is a machine that is subject to processing, alteration, tuning and other modernization methods.

First of all, tuning of this type of car begins with the alteration of the brakes, and ends with the engine. Undoubtedly, the main task of improving the external and internal condition of the VAZ 2109 is to improve and prove to people that such cars are still capable of something.

Car enthusiasts undertake to upgrade VAZ-type cars due to the fact that they are light and fairly cheap.

Preparation process

In order to carry out a flashing of the cabin, you will need to use a steam generator. After all, with the help of its firmware material it will be easier to stretch.

In order to repair the fuel level sensor in a car, you will need:

• Key ten.
• Head for seven.
• Tester.
• And a new thermistor.

Interior improvement VAZ 2109

This video shows the transformation of the VAZ 2109. Enjoy watching!

The standard upholstery of the VAZ 2109 is very fragile and can wear out quickly enough, so it’s worth tuning the interior when purchasing a car. The first step when tuning the interior will need to tear off all the old material, including on the ceiling, in order to glue the new one later.

When sticking a new material on the ceiling, you need to apply glue to it twice with a time interval of five minutes, and then glue the upholstery to the ceiling. You will also need to wait until the glue dries and complete the work, cut all the holes.

Also, additional LED lamps are installed in the cabin in order to improve the illumination of the car interior. Even motorists often fit the steering wheel with leather to improve the design of the car.

Car engine improvement

Tuning a car engine should be taken quite seriously, because it is not for nothing that they say that the engine is the heart of the car. Often, motorists modify the cylinder head into engines, change pistons, and install a turbine. It is these improvements that give the engine confidence in operation.

When carrying out this type of modernization, it will be necessary to completely disassemble the engine.

Do-it-yourself carburetor improvement

Why do you need to do carburetor tuning?

This type of tuning is carried out in order to give additional power to the car. The main way to tune a carburetor is to replace one with two, that is, instead of one, put two carburetors.

Can also be sanded intake manifold carburetor.

Transformation of the chassis of the car VAZ 2109

Tuning of this kind can be carried out according to two criteria: either to improve the suspension, or the appearance of the brake part.

Suspension tuning can be done in three ways:

• Replace a number of old car parts with new ones. Install a gas-oil shock absorber, some well-known brand.
• Installation of new parts that will give rigidity to your car.
• Cut the spring and lower the suspension.

Due to such work done, your car will be stable and more collected, especially in tight corners.

An example of tuning the VAZ 2109 suspension

Like the whole family called Vaz, rear brakes drum and therefore most people who own cars of this type, first of all, change the rear drum brakes to disc brakes.

Tuning headlights and electrical equipment

The headlights that are already present in the car do not decorate it at all, but on the contrary, make its design much darker.

Therefore, the replacement of standard headlights is made in three types:

• headlight block. Headlights that add human features to the car. They look quite attractive from the outside.
• Headlight tinting. In the case of installing this type of headlights, the lighting on the road will change enough and it will change for the worse;
• xenon headlights. Negatively affect people passing by. They are also fined by the traffic police.

The plastic on the taillights is rather muddy and not pretty. Also in the case of fog, they provide very poor illumination, and this can lead to an accident. You can, of course, buy new plastic and replace the old one, but it is more profitable to polish the old, standard plastic from the factory with your own hands.

And in the case of polishing the taillights, they will acquire a new and beautiful look, and most importantly, they will illuminate perfectly. And in case of fog, you will be noticed by cars coming behind you, and in this way you will avoid accidents and save your nerves.

The tuned, new bumpers just look amazing with this car, much better than the standard ones that came up at the factory. But the price of this type of bumper is appropriate. On the market there is a type of such a profile as a "plastic window", with the presence of a plastic mesh inside.

Do-it-yourself installation will not cost you too much. There are three types of factory devices. But each of them is simply disgusting. We recommend watching this video, from which you will learn how to tune a VAZ 2107 engine.

Therefore, every self-respecting motorist will change it to another, to a more beautiful one. For the VAZ 2109, there are two types of instrument panel, these are arrow and electronic. Like many other details this vehicle, at the factory were made either not beautiful, or not of high quality. The same can be said about the window regulator.

In winter, in cold weather, lowering the glass is simply unrealistic, since the rubber that seals simply freezes and does not allow the glass to be lowered. In order to replace an old power window, you will need a new power window, your hands and tools.

Body tuning VAZ 2109

Tuning this type is quite simple, no matter what.

The most standard improvement of this car is the installation of aerodynamic suspensions on the car. This is a fairly simple and inexpensive upgrade.

Many VAZ owners quite often have the idea to repaint the body in a different color, but you need to remember that this type of tuning must be registered. But body painting now costs quite a lot.

You can also emphasize the beauty of your car by installing a neon suspension. Nine trunk is very, very small. The most optimal solution for tuning the trunk is to install a subwoofer.

. Our undoubtedly useful and very interesting site will tell you how to do everything right!

Prices shown Chinese SUVs and crossovers.

This whole process consists of four steps:

• A plywood speaker box is selected;
• The wiring is carried out and the subwoofers themselves are connected;
• Inside the trunk is sheathed with a special, durable quality fabric;
• An amplifier is mounted on top of the trunk.

We all must be well aware that if you tune a car from the outside, and leave everything rotten inside, then there will be no sense. Any tuning should start from the heart of the car, namely, from the engine.

After acquiring a VAZ 2109, it is imperative to solve the problem with the taillights, since the plastic on them is rather cloudy, and in case of fog it will be difficult to notice your car from behind. In a VAZ 2109 car, a common failure of the fuel quantity sensor.

In the event of a breakdown, the light will burn and blink almost always, and this does not depend on whether there is gasoline in the tank or whether it is not there.

In the event of a breakdown, do not rush to go to the store for a new one, you can handle the breakdown with your own hands.