The suspension on the Ford Transit can be installed independently. But if you want to be sure that everything is done correctly, get a guarantee and save your nerves, contact our company.
Call 8-800-555-20-88

Air suspension on Ford Transit improves performance characteristics car, allows you to reduce the cost of repairs and maintenance, and, consequently, increase the profitability of cargo transportation.

The air suspension on the Ford Transit eliminates sagging and swinging of the body when loaded, increases the life of the springs and their attachment points, increases comfort and improves handling when driving with a load. After installing the pneumatic elements (pillows), the weight of the car is redistributed, which leads to the unloading of the springs and their fastening elements. Adjusting the air pressure in the pneumatic elements (pillows) allows you to select the optimal mode of operation of the air suspension, depending on the vehicle load.

How air suspension is installed on a Ford Transit

The air suspension on the Ford Transit is additional equipment, its installation does not require changes in the design of the car. Pneumatic elements (pillows) are fixed between the frame and the bridge using special brackets. The air suspension control system is usually located in the passenger compartment.

For installation, it is not necessary to completely redo the chassis. The most popular option is to install a single-circuit air suspension on a Ford Transit on the rear axle. First, the brackets for the pillows are installed. The upper one is attached to the frame, the lower one is attached to the leaf spring. In the course of work, it is necessary to make holes for the bolted connections of the brackets. Next, pneumatic cylinders are installed here. They are connected to hoses. It is better to install a compressor with a receiver in the cabin. V engine compartment space is limited, and in the back (if it is a booth) it can be damaged. We connect to the unit solenoid valves and display the control panel on the front panel.

This completes the installation of the air suspension in the Ford Transit. Pipes should be laid in inside frames, attaching them to the clamps. We extend the resource In order for the cylinders to serve for a long time (and this is half the cost of the entire system kit), you need to know some rules for caring for them. The rubber coating of the pillows is very afraid of road reagents and dirt. Even small particles can act as an abrasive at the joints of air springs. In order for the pillows to serve for a long time and not to be lowered, they should be periodically cleaned of dirt. And in winter - treat with silicone.

The air suspension on the Ford Transit is easy and quick to install. For installation, you will need a standard set of tools and basic car repair skills. If it is not possible to install the kit yourself, we recommend using the services of a professional car service.

There are two ways to control the air suspension: comfortable and economical.

At comfortable option the air suspension on the Ford Transit is installed in conjunction with the air suspension control system (quite simple). In this case, the air pressure in the pneumatic elements (pillows) is controlled by a key from the passenger compartment, and the pressure in the pneumatic elements (pillows) is controlled by a pressure gauge.

In the economical version, the air suspension on the Ford Transit is installed without a control system. Then the adjustment and control of pressure in the pneumatic elements (pillows) is carried out through the nipple of the pneumatic system in the same way as the adjustment and control of pressure in a car tire.

Aride air suspension on a Ford Transit ( front-wheel drive FWD) (00-14), rear axle.

Description - Air Suspension Transit

The auxiliary air suspension kit on the Ford Transit is installed in addition to the vehicle's standard suspension and allows you to reduce the load on the springs. Installing air suspension will allow the Ford Transit to carry more cargo without losing control, eliminate spring sag and breakage, and reduce body roll and roll. Air suspension for Ford Transit (front-wheel drive) is an excellent solution to increase the life of the standard suspension.

Set air suspension designed specifically for the Ford Transit and includes two pneumatic elements, brackets for mounting to the frame and axle, fasteners, accessories for pumping from an external compressor, instructions.

Light-duty Ford Transit cars are quite in demand in our country. Often the choice is based on the more affordable cost of this model, in comparison with the Sprinter. At the same time, the load capacity and comfort of the presented model is in no way inferior to the last representative. Ford Transit is presented in different variations. In most cases, the manufacturer provides for the installation of springs or springs on the rear axle of such vehicles. However, given the increased demand for trucking services, it is understandable that owners are trying to operate light vehicles in accordance with their maximum capabilities. vehicle, and sometimes significantly exceed them, which affects the rapid wear of the suspension and the deterioration of its qualities. It is for this reason that the air suspension for the Ford Transit has become a necessary element with which you can achieve significant payloads.

The pneumatic system has become quite widely used in commercial vehicles. Moreover, you can install it both in specialized car services, and on your own. Its benefits are obvious. Air suspension for Ford Transit avoids problems such as:

enough rapid wear regular elements, installed by the factory and increase their service life at times;

the appearance of a side roll;

breakage of springs;

suspension breakdowns.

This is achieved by installing a cylinder, which acts as a buffer and prevents the vehicle frame from coming into contact with the spring leaf. The air suspension on the Ford Transit allows you to make the movement of a loaded car more comfortable and smooth in poor-quality road conditions, eliminating vibrations and bumps.

You can buy from us:

auxiliary air suspension VB-SemiAir with installation on the rear axle Ford Transit for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for the Transit Spark in basic and comfort configurations;

automatic air suspension on the Ford Transit VB-FullAir 2C, mounted on rear axle for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for Transit Spark.

The systems include air tanks, a blower, air lines, electronic indicators, as well as elements and devices for mounting and fixing.

Our online store is pleased to offer you an auxiliary air suspension kit for Ford Transit for self installation on the most favorable terms!

This equipment is the easiest and most convenient way to increase the carrying capacity, handling, comfort of your car, as well as significantly reduce the wear of standard suspension elements!

Everything is included in the kit necessary elements and fasteners. Requires no special tools for installation.

When installing our air suspension kit changes to the main components of the car do not occur, and therefore does not require registration in traffic police and does not entail problems with technical inspection.

You can install this auxiliary air suspension kit on the Ford Transit at:

Moscow, st. Aviamotornaya d.44

By installing an auxiliary pneumatic reinforcement system spring suspension, You are getting:

• Increased payload without damaging the vehicle

Pneumopillows allow the suspension to cope with loads up to 4 tons!

• Reduced wear on springs

Regular springs are unloaded and work in "greenhouse" conditions.

• Possibility of installation on "tired" springs

Install airbags on springs that require replacement and they will last a long time.

• The correct position of the body at any load

The body is always horizontal, and this is the correct operation of the head light and a decrease in the braking distance.

• Reducing vehicle roll

Pneumopillows keep the car from rolling in corners and align it with uneven loading.

• Increasing comfort

An overall increase in comfort and good handling of road bumps.

• Increasing the profitability of your fleet

Air suspension is an opportunity to carry 2-3 times more cargo in one flight.

You also save on replacement springs and fines for overloading.

• Fast payback of the air suspension kit

The air suspension pays off in 1-2 flights.

FREQUENTLY ASKED QUESTIONS

Question: Does your air suspension kit include a compressor (control system)?

Answer: No, not included. But we offer to purchase it separately, with a choice of components specifically for your needs. Firstly, this reduces the cost of the kit, because many do not need a control system, and secondly, you get a product that meets your needs, and not some kind of universal, average set.

Question: How much cargo can I carry after installing the air suspension?

Answer: Now it's up to you, our air bags have huge margin of safety. But we kindly ask you to think about other elements of the car that you did not strengthen, now they are at risk. Use your vehicle wisely.

Question: What is the lifespan of your air suspension?

Answer: At correct installation and use in accordance with our recommendations air suspension service life practically unlimited. Of course, we do not take into account external damage to the pneumatic element.

Question: The springs need to be replaced, do they need to be changed to install the air suspension?

Answer: Our air suspension kit can be installed and on "tired" springs they do not need to be replaced. If the springs are broken, then they, nevertheless, will have to be changed.

Question: Why so expensive?

Answer: Expensive only at first glance. The kits are created using a large number of imported components, which affects the price. But the price of the kit is comparable to the price of replacing the springs with new ones, and the pillows will last much longer. If you consider the savings on replacing springs, as well as the additional profit from increasing the carrying capacity of your vehicle, you will realize that this is not at all expensive and will pay off very fast.

Question: Single-circuit or double-circuit system should I choose?

Answer: If you use the basic kit without a control system, if you do not overload the car on one side, then you will be enough one circuit(pillows are connected in one highway). For greater stability of the car (for example, with a high height of the body / booth), we recommend installing dual control system.

Increase the load capacity and endurance of your Ford Transit by installing an auxiliary air suspension on the stock leaf spring system. This will not change the location of standard parts, however, it will provide your car with many advantages:

• Increased load capacity without damage to the car;
• Reduced wear of springs;
• Reduction of vehicle rolls;
• Fast payback of the air suspension kit.

What do the air bags installed in springs for Ford give?

Suspension breakdown, car roll are excluded, comfort and energy intensity increase, the suspension becomes collected, quiet. With air springs in the springs, you can adjust the clearance and suspension stiffness, the car will not sag when fully loaded. The effect is especially noticeable if you use them on a bad road (gravel road, pits, bumps, potholes, primer, asphalt waves, railway crossings, etc.). Also, if the wheel rubs against the arches, then you can get rid of this with the help of air bags in the springs.

Pneumocylinders black stone suitable for vehicles where the shock absorber is located separately from the spring. The ✔ sign means that the shock absorber is installed separately from the spring and installation is possible, the ✘ sign means cars with a MacPherson strut, or where it is structurally impossible to install air bags. Sign ✐ - there is an instruction / photo of the installation. To go to the instructions, you must click on the icon itself. The catalog does not give a 100% guarantee that the pneumatic element will fit your car, as there are design differences in the model configurations or their modifications.

How to determine if an air spring is suitable black stone if there is no information in the catalog?

It is necessary to measure the inner diameter and height of the spring in the normal state without a jack and without a load (it is easier to measure in a pit):

1. Make sure the vehicle is on level ground with the springs under the weight of the body.
	2. Measure the INSIDE diameter of the spring. If the spring is conical or barrel-shaped, measurements must be taken at the points of maximum and minimum diameter.
3. Measure the height of the INTERNAL space of the spring vertically, excluding standard buffers (impactors) of the compression stroke - they must be dismantled.
	4. Check the interior for bolts, sharp objects and bulges. If there are any, they must either be eliminated or covered with fenders.
5. If there are holes in the lower arm and/or support on the body side with a diameter of more than 20 mm, they must also be closed with fenders "W" and/or "F".
	6. Select the most suitable pneumatic element according to the plate below. The free height space can always be filled using the "W" and/or "F" fenders. The excess space in the diameter of the pneumatic element will fill when pressure is applied.

Standard sizes of pneumocylinders:

Pneumatic elements:	The size:	Vendor code:
	Height: 147 mm. (+ purge valve = 178 mm.) Diameter: 76 mm.	295.147.76S
	Height: 202 mm, diameter: 88 mm.	295.202.88M
	Height: 202 mm., Diameter: 88 mm.	295.202.90MHD
	Height: 202 mm. (+ inflation valve = 233 mm.), diameter: 88 mm.	295.233.88ME
	Height: 230 mm, diameter: 110 mm.	295.230.11L
	Height: 175 mm, diameter: 110 mm.
	Height: 175 mm (+ inflation valve = 181 mm), diameter: 110 mm.

Fenders and other accessories, including paging output kits in a convenient place (trunk, bumper, towbar, gas tank hatch, etc.), available in the section.

Consider spring fatigue when measuring. New springs can give an extra 5 cm in height. If the springs are sagging and you want to return the body to its previous height, you can use pneumohelpers black stone both with and without replacement springs. If you did not find your car in the list, or you know the internal dimensions of the spring, send this information to us by mail, we will publish it in the catalog.

Photos and videos of installed kits:, and.

Air suspension kits for other vehicles, including leaf springs: .

FORD (FORD)

Cmax 2007(CB3) ✔ air bellows BlackStone MHD
Cougar 1998-2000(MC) ✘
Escort ✔
Fiesta 1976-1989(AX) ✔
Fiesta 1989-1996(CX) ✘
Fiesta 1995-2001(DX) ✘
Fiesta 2008-(CB1) ✔
Fiesta/Fusion 2001- (CBK) ✔
Focus 1998-2005(CAK) ✘
Focus 2004-/Focus C-MAX 2003 - (CAP) ✔
Focus 2008 - (CB4) ✔ tested fit
Focus Cabriolet 2006-(CA5) ✔
Galaxy 1994-2000(VX) ✔ air bellows BlackStone MHD
Galaxy 2000-(VY) ✔
Granada/Scorpio 1985-1992(CE) ✔
Granada/Scorpio 1992-1994(DE) ✔
KA 1996-(CCQ) ✘
KA 2008-(CCU) ✔
Kuga 2008-(CBV)-? air bellows BlackStone MHD
Mondeo 1992-1996 Europe (FD) ✔
Mondeo 1996-2000 Europe (GD) ✔air bellows BlackStone MHD
Mondeo 2000-2007 Europe(GE) ✔
Street KA 2003-2005(CCS) ✘
TH!NK City 2000-2002(CT)-?
Windstar 1994-2000(WA)?
Escape 2008- Russia(R3) ✔
Everest 2006-(EU) ✘
Everest 2009-(EP) ✘
Everest/Endeavour 2003-(EV) ✘
Explorer 1992-2000(EX) ✘
Maverick (LHD) 1993-1996(ML) ✔
Maverick (LHD) 1996-1998(NL) ✔
Maverick (RHD) 1993-1996(MR) ✔
Maverick (RHD) 1996-1998(NR) ✔
Maverick 2000-(TM1) ✔
Maverick 2002-(TM3) ✔
Maverick 2007-(TM7) ✔
P100 1987-1993(DP) ✘
Ranger 1998-2003(ER) ✘
Ranger 2002-(EQ) ✘
ranger 2006-(ET) ✘
ranger 2009-(ES) ✘
Transit (TT9)- air suspension kit for Ford Transit: .
Transit Connect 2002-(TC7) ✘

We offer a wide range of air suspension kits for the series ford cars transit. All products are different high quality and is supplied only by trusted manufacturers, which guarantees the reliability and durability of all parts.

If the models from the catalog of our website do not suit you, you can find the necessary air suspension kit for your Ford Transit by consulting with our consultants. They will tell you in detail about the products of the catalog and tell you how to properly measure and choose the appropriate model.