Light-duty Ford Transit cars are quite in demand in our country. Often the choice is based on the more affordable cost of this model, in comparison with the Sprinter. At the same time, the load capacity and comfort of the presented model is in no way inferior to the last representative. Ford Transit is presented in different variations. In most cases, the manufacturer provides for the installation of springs or springs on the rear axle of such vehicles. However, given the increased demand for trucking services, it is understandable that owners are trying to operate light vehicles in accordance with their maximum capabilities. vehicle, and sometimes significantly exceed them, which affects the rapid wear of the suspension and the deterioration of its qualities. It is for this reason that the air suspension for the Ford Transit has become necessary element, with which you can achieve significant indicators of carrying capacity.

The pneumatic system has become quite widely used on commercial vehicles. Moreover, you can install it both in specialized car services, and on your own. Its benefits are obvious. Air suspension for Ford Transit avoids problems such as:

enough rapid wear regular elements, installed by the factory and increase their service life at times;

the appearance of a side roll;

breakage of springs;

suspension breakdowns.

This is achieved by installing a cylinder, which acts as a buffer and prevents the vehicle frame from coming into contact with the spring leaf. The air suspension on the Ford Transit allows you to make the movement of a loaded car more comfortable and smooth in poor-quality road conditions, eliminating vibrations and bumps.

You can buy from us:

auxiliary air suspension VB-SemiAir with installation on the rear axle Ford Transit for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for the Transit Spark in the basic and comfortable configuration;

automatic air suspension on the Ford Transit VB-FullAir 2C, mounted on the rear axle for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for the Transit Spark.

The systems include air tanks, a blower, air lines, electronic indicators, as well as elements and devices for mounting and fixing.

The suspension on the Ford Transit can be installed independently. But if you want to be sure that everything is done correctly, get a guarantee and save your nerves, contact our company.
Call 8-800-555-20-88

Air suspension on Ford Transit improves performance characteristics car, allows you to reduce the cost of repairs and maintenance, and, consequently, increase the profitability of cargo transportation.

The air suspension on the Ford Transit eliminates sagging and swinging of the body when loaded, increases the life of the springs and their attachment points, increases comfort and improves handling when driving with a load. After installing the pneumatic elements (pillows), the weight of the car is redistributed, which leads to the unloading of the springs and their fastening elements. Adjusting the air pressure in the pneumatic elements (pillows) allows you to select the optimal mode of operation of the air suspension, depending on the vehicle load.

How air suspension is installed on a Ford Transit

The air suspension on the Ford Transit is additional equipment, its installation does not require changes in the design of the car. Pneumatic elements (pillows) are fixed between the frame and the bridge using special brackets. The air suspension control system is usually located in the passenger compartment.

For installation, it is not necessary to completely redo the chassis. The most popular option is to install a single-circuit air suspension on a Ford Transit on the rear axle. First, the brackets for the pillows are installed. The upper one is attached to the frame, the lower one is attached to the leaf spring. In the course of work, it is necessary to make holes for the bolted connections of the brackets. Next, pneumatic cylinders are installed here. They are connected to hoses. It is better to install a compressor with a receiver in the cabin. V engine compartment space is limited, and in the back (if it is a booth) it can be damaged. We connect to the unit solenoid valves and display the control panel on the front panel.

This completes the installation of the air suspension in the Ford Transit. Pipes should be laid in inside frames, attaching them to the clamps. We extend the resource In order for the cylinders to serve for a long time (and this is half the cost of the entire system kit), you need to know some rules for caring for them. The rubber coating of the pillows is very afraid of road reagents and dirt. Even small particles can act as an abrasive at the joints of air springs. In order for the pillows to serve for a long time and not to be lowered, they should be periodically cleaned of dirt. And in winter - treat with silicone.

The air suspension on the Ford Transit is easy and quick to install. For installation, you will need a standard set of tools and basic car repair skills. If it is not possible to install the kit yourself, we recommend using the services of a professional car service.

There are two ways to control the air suspension: comfortable and economical.

At comfortable option the air suspension on the Ford Transit is installed in conjunction with the air suspension control system (quite simple). In this case, the air pressure in the pneumatic elements (pillows) is controlled by a key from the passenger compartment, and the pressure in the pneumatic elements (pillows) is controlled by a pressure gauge.

In the economical version, the air suspension on the Ford Transit is installed without a control system. Then the adjustment and control of pressure in the pneumatic elements (pillows) is carried out through the nipple of the pneumatic system in the same way as the adjustment and control of pressure in a car tire.

Aride air suspension on a Ford Transit ( front-wheel drive FWD) (00-14), rear axle.

Description - Air Suspension Transit

Set auxiliary air suspension on Ford Transit it is installed in addition to the standard suspension of the car and allows to reduce the load on the springs. Installing air suspension will allow the Ford Transit to carry more cargo without losing control, eliminate spring sag and breakage, and reduce body roll and roll. Air suspension for Ford Transit (front-wheel drive) is an excellent solution to increase the life of the standard suspension.

Set air suspension designed specifically for the Ford Transit and includes two pneumatic elements, brackets for mounting to the frame and axle, fasteners, accessories for pumping from an external compressor, instructions.

For Ford Transit produced in 2015, 2106,2017.

7th generation

Reinforcement of the leaf.

Manageability improvement.

Increase in carrying capacity + 2 tons.

Possibility to change clearance.

Air suspension kit to strengthen the rear suspension Ford Transit (Ford Transit) manufactured since 2015. Pneumopillows are installed on the rear axle and work concurrently with the spring package. Installation does not require modifications to the factory suspension. That allows you to keep the manufacturer's warranty. Each of the pneumatic elements is able to withstand a load of more than 3 tons.

Pneumopillows remove up to 80 percent of the load from the spring and absorb vibration from poor-quality roadways. For passenger traffic air suspension will increase comfort. For cargo transportation - reduce the cost of suspension repairs and increase business profitability.

Each pneumatic element is made of a rubber compound that is not susceptible to the effects of reagents and benzenes. Also, air bags have proven themselves when used in critical low temperatures our climate.

The basic kit for the rear-wheel drive version includes transit

Reinforced air bags
- mounting brackets
- pneumatic line
- pneumatic fittings
- swap nipple
- installation instructions

The price of the air suspension does not include the cost of the control system from the passenger compartment. Systems are selected individually depending on the goals and objectives set for the car.

Characteristics of pneumatic elements for Transit rear-wheel drive:
Rubber compound Rubber with nylon cord - 3 layers
Mounting holes 3 - D10 (stud), 1- 1/2 for fitting
Diameter at (3 - 7 atm) 13.5 cm
Diameter (0 atm) 14.5 cm
Diameter (0 atm) under load 15 cm
Height (3 - 7 atm) 24 cm
Height (0 Atm) 14.5 cm
Height (0 atm) under load 8.5 cm
The lifting force of the pneumatic element at (8-11 Atm) over 1200 kg
Minimum operating pressure 1 Atm
Working pressure 2- 8 Atm
Pressure to destruction 25 atm
The pillow has a triple margin of safety.

Cargo Ford Transit New with air suspension

Official dealer for the sale of new cars Ford Transit"Aaron auto" offers for sale finished car already installed with air suspension on a gable truck Ford Transit.

These vehicles Ford with air suspension can buy already available in Moscow on Ryabinovaya street. On the this car Was installed rear auxiliary air suspension kit With dual control system. This system air preparation is equipped with an air receiver for faster and easier lifting of the body, even with a maximum load.

Even if your car does not have standard air suspension, this is not a problem. Our specialists at Aaron Auto can install the air suspension on your spring car in a short time. All major air suspension kits for commercial transport always available in a warehouse in Moscow.

New Ford Transit easily sags at the slightest load. Each transport company tries to use its commercial transport fleet to the maximum. But the carrying capacity Ford Transit does not always coincide with the desire of the customer to take away Weight Limit with comfort. The most correct and flexible way to compensate for the subsidence of the new Ford Transit is to install additional air suspension to the standard package of springs.

This method of installing the air suspension allows you to keep the regular suspension elements unchanged. When installing an axle set of air springs, welding, drilling or modification of the standard suspension is not required.

The pressure in the airbags is regulated by two control keys and is controlled by a two-pointer manometer with a suspension:

In this case, there is no need to get a standard wheel compressor to change the pressure. You can adjust the height of the car from the cab.

The pneumatic control system is installed under the passenger seat and is hidden from prying eyes:

The additional output of the receiver can be used to pump up the wheels or output a pneumatic signal - the loudest reminder of yourself in the general stream.

FORD TRANSIT DRIVE-RITE AIR SUSPENSION

Suitable for all-metal vans of all types and modifications, as well as chassis with any superstructures ( onboard platform, manufactured goods van, isothermal van, refrigerator, camper, motorhome)

Specifications

• Applicability: Ford Transit (single and dual tires)
• Year of issue: 2006- present
• Kit number: DR 02.013448
• Air Spring: Firestone #6781
• Set weight: 22 kg
• Compressor: 12V
• Recommended control systems:
• DR 11.016110 (Single circuit, compressor #1260, max. pressure 7 Bar)
• DR 11.012236 (Single circuit, compressor #9284, max. pressure 9 Bar)
• Possible increase in ground clearance (rear axle): 50 mm
• Air pressure:
• Max 7 Bar (100 PSI)
• Minimum 1 Bar (15 PSI)
• Certificates of conformity: TP and TUV

The air suspension kit includes:

• two high quality air springs
• metal brackets
• fasteners
• Air fittings for airbags
• air tee for connection
• plastic tube with a diameter of 6 mm
• special inflation nipple (not used with control kit)

Ford Transit is the market leader in light commercial vehicles. Installation of DRIVE-RITE air suspension in addition to the standard one rear suspension, allows you to significantly improve the handling and stability parameters of these vehicles.

The optional DRIVE-RITE* air suspension works in tandem with the standard suspension, which uses a steel spring as an elastic element. The elastic element of the additional suspension is an air spring. Air pressure can be adjusted manually or automatically using DRIVE-RITE control systems. The consumer can choose best option control systems, based on the characteristics of the operation of the vehicle.

The additional air suspension significantly reduces the load on the regular springs, improving the vehicle's stability and comfort parameters.

With the help of the control system, the driver can adjust the pressure in the air springs in such a way as to ensure optimal parameters stability and comfort, regardless of the degree of vehicle loading.

Optional DRIVE-RITE air suspension is an investment in your vehicle. As you know, over time, regular metal springs lose their elasticity and begin to “sag”, which leads to a decrease in comfort, an increase in loads on the chassis elements, and an increase in driver fatigue, especially when the car is fully loaded.

Additional air suspension is an active component of the regular suspension of your vehicle. A vehicle equipped with the DRIVE-RITE air suspension package is easier to drive, more comfortable and safer throughout the entire payload range.

Optional DRIVE-RITE air suspension is exactly what every Ford Transit owner needs

DRIVE-RITE AIR SUSPENSION BENEFITS:

• IMPROVES VEHICLE STABILITY AND HANDLING
• INCREASES COMFORT AND SAFETY
• PREVENTS LONGITUDINAL ROLL
• MAINTAIN CONSTANT GROUND CLEARANCE
• REDUCES TRANSVERSAL ROLL WHEN CARGO COMPARTMENT IS UNUNIFORMLY LOADED
• REDUCES FATIGUE LOADS OF SUSPENSION ELEMENTS
• HIGH QUALITY COMPONENTS MADE IN THE USA, GERMANY AND IRELAND
• AIR SPRINGS BY FIRESTONE (World’s No.1 Air Spring)
• EASY INSTALLATION AND MAINTENANCE
• DRIVE-RITE IS OVER 20 YEARS OF EXPERIENCE IN THE DEVELOPMENT AND PRODUCTION OF AIR SUSPENSIONS
• OEM AND TUV CERTIFICATES

A complex approach

DRIVE-RITE air suspension kits are easy to install, require no additional mechanical work (drilling or welding) and meet the highest quality standards. DRIVE-RITE proprietary control systems are available as an option.