Reading 4 min.

There is rarely a car owner who would completely refuse to add "horses" to his car, and even more so since the procedure does not require mechanical action on the engine and other systems. The essence of chip tuning is to correct the software of the control unit responsible for the correct operation of the engine. We will understand the pros and cons of chip tuning the engine.

Of course, the method cannot be called guaranteed or 100% win-win. Miracles don't happen. And therefore, there are both supporters pointing to the pluses and opponents looking for the minuses of this method of car tuning.

Despite this, chip tuning has gained great popularity among car owners. And one of the main confirmations of this is the close cooperation large auto concerns with reputable tuning companies. They carry out joint programs and offer a single product. However, we should not forget that such cooperation is rather connected not only with the desire to please the client, but also to control the process of improving the engine, which was set to factory limiting settings. Often, by the way, official chip tuning consists in removing them.

Features of the procedure

Chip tuning is defined as the modification and optimization of the settings of the program that controls the operation of the engine. Literally, the name of the procedure is translated as follows:

• chip - microcircuit;
• tuning - tuning.

Actually, the improvements are based on the source data, which is stored in the form of tables in an integrated circuit. Connection to the control unit for working with data is carried out by means of special software. The control unit does not even need to be removed for this. Everything happens quite quickly and without any mechanical intervention.

Some garage professionals do their own chip tuning by downloading tuned firmware from the Internet. However, we still think that even digital intervention in the operation of the engine should be carried out by real masters, who, among other things, are also responsible for the correct operation of the control unit after the engine upgrade procedure. Otherwise, you can achieve the opposite of the desired results.

Likely results

According to various estimates, the result of high-quality chip tuning can be an increase in the power of the car's power unit by 5–25%. At the same time, the price of the procedure is disproportionately low and, most importantly, no dangerous mechanical impact is required on engine parts and other systems, which entails recommended improvements to the entire design to balance the system.

Mostly, the percentage of engine power increase depends on the factory settings. So, some motors that leave the factory with optimal settings are unlikely to be overclocked. The best way to add "horses" is to those motors whose capabilities are curtailed by software. Some manufacturers may even sell cars with "better" engines that are actually just equipped with the correct (better) ECU firmware.

However, the advantages of the idea do not end with power. Proper tuning allows you to balance fuel consumption. Obviously, this does not mean that fuel consumption will decrease if you try to squeeze out of the engine all the declared and received additional power. Driving with the "pedal to the floor" will remain uneconomical. Moreover, due to the increase in power, fuel consumption with an aggressive driving style can only increase proportionally.

The effect of the procedure on the wear of the power unit

Chip tuning is an absolutely safe and 100% harmless procedure. Even an incorrect setting, as a rule, only leads to a decrease in power performance and an increase in fuel consumption. However, these disadvantages are easy to fix by contacting a professional tuning specialist.

Advantages and disadvantages of chip tuning

The main advantages of improving the firmware are as follows:

• increasing the power of the car engine;
• growth speed characteristics auto;
• improved response to the gas pedal;
• increase in dynamics;
• the procedure is carried out quickly (in contrast to the mechanical improvement of the engine);
• relatively low upgrade cost;
• absolute harmlessness of the procedure and its results;
• the ability to restore the "native" factory firmware without any damage;
• suitable even for cars under warranty, since the dealer service process does not provide for checking the software version.

And this is not a complete list. Pluses can be supplemented with other pleasant things, for example, the possibility of unique customization of non-standard equipment.

Cons fade against the background of the above list. In principle, the main disadvantage is the increase in fuel consumption during aggressive driving. In the list of "cons" you can also add the possibility of incorrect installation, which can worsen performance indicators car.

I’ll drop by a tuning studio in a car with a MeMZ engine with a volume of 1.3 liters, and after that it will give out twice as many “horses”!

You can't double the power. Many promise an increase of 20%, but this is only possible for a turbo engine. For an atmospheric engine, we can seriously talk about an increase within 10%. It is achieved through more precise tuning. There are simply no other ways, an atmospheric motor cannot receive more air in a passive mode than is laid down by its manufacturer. So for him, an increase of more than 10% is fantastic.

The only exceptions are motors with several levels of deforcing relative to maximum power, laid down by the developers. Here we can recall the modern 1.6 series EA211 from Volkswagen, which is produced in versions for 90 and 110 hp, as well as the Mercedes-Benz M276 (249 and 306 hp), and some others that have exactly the same “ iron”, but different firmware. Here growth is possible, but this is the only exception to the “ten percent rule”.

1 / 2

2 / 2

Turbo engines have more potential for chip tuning. As a rule, the increase is from 15 to 20%. Sometimes you can add even 50%, but this is only possible in the case described a little higher for atmospheric engines. An example for turbocharged engines is Volvo with their D3, D4 and D5. All of these motors can produce up to 260-270 hp, although the weakest in stock has only 163 hp.

Under the hood of Volvo S80 D5 "2009–11

Motors that already leave the factory with a high degree of forcing deserve special mention. This one, for example, is Nissan Juke 1.6 turbo: more than 200 “horses” from such a volume is already the ceiling, and you should not expect a significant increase in power in such cases (no more than 15 hp, which will even be difficult to notice), although the engine is supercharged. Well, or new motors c direct injection from Kia and Hyundai - here the potential is also small. And if you are promised a 30% increase with them, then most likely you have people who work according to the “supercharged engine - plus 30%” pattern. There will be no such increase on such motors.

Under the hood of the Nissan Juke "2014–present

The situation with a turbodiesel is almost the same as with petrol engines. Here you can expect almost the same increase of 20-30%.

More is better

The next common opinion sounds something like this: the relative increase in power from a three-liter V6 is always greater than from a one and a half liter in-line “four”. More volume - more potential for chip tuning.

This is not so - of course, if we are talking about percentage. After all, 12-20 Horse power add, for example, Mitsubishi Lancer with a 1.8 liter engine and Cadillac Escalade with a 6.2 liter engine. It all depends on how much margin the motor has constructively. An equally small increase in power can be obtained from Infiniti (3.7 liters - no more than 10 hp), and from Hyundai Solaris(1.6 l - 7-8 hp). So the opinion that you can always get a more serious increase from a larger engine is erroneous.

Breaking is everything!

Another stereotype about chip tuning: the increased power (more precisely, torque) during its course reduces the transmission resource. This is especially dangerous for automatic transmissions and robot boxes. Is it so?

In short, yes. In any case, with an increase in torque, the load on the transmission also increases. Another thing is how critical this increased load will be for a particular transmission. With atmospheric engines, it’s somehow simpler: the same 10% usually fit into the percentage of the margin of error of the gearbox, and no gearbox will even notice such an increase. Here, even resource tests will not show the difference.

Another issue is the turbodiesel, whose initial torque is already large. For example, 500 Nm. We add another 150, and the transmission is designed for, say, 550 Nm. In this case, of course, something bad can happen. But if we are talking about a car where there are restrictions on the transmission, good tuning studios always take this into account, and in the firmware they do not increase the torque by more than the transmission can digest.

Here the first question of tuning philosophy arises: to do it at all or not? Here you have to choose. And remember that tuning involves the inevitable increase in loads on components and assemblies. Whatever they write to you on the Internet, there is no tuning without reducing the resource.

… and continue

Here it is quite logical to recall the following opinion: chip tuning significantly reduces the life of the motor. Is it always like this? Yes and no. It all depends on what the motor costs, what stock it has from the factory, and what kind of chip tuning is supposed to be. The last question is especially interesting.

I remember the story when one generally well-known German company, the coryphaeus of tuning, ruined three atmospheric engines chevrolet cruze contract. Which break tuning, at first glance, is difficult. The point was that the ignition timing was so early that detonation began, which destroyed the pistons. On the other hand, there are many customers who live happily ever after with initially boosted chipped turbo engines, which, with careful tuning, were able to save their resource. Therefore, you don’t need to go too far with chip tuning, but you need to know how to properly tune the engine during flashing.

Under the hood of the Chevrolet Cruze "2016–present

Yes, an increase in torque can reduce the resource of the units. But the main factor is how you will dispose of the resulting increase. If you drive in the "gas to the floor - idling”, then an increase of 20% by the same 20% will reduce the life of the motor. But if you keep a calm manner, and use all the benefits of tuning only if necessary (for example, when overtaking), then the age of the motor will not become shorter.

The man in the next box

I have a neighbor in the garage, his name is Sanyok, so for five hundred rubles he uploads the same firmware downloaded from the Internet, which greedy guys upload in a tuning studio for 10-12 thousand. And I'm not going to pay so much for the same work to these monsters.

Maybe this sometimes happens, but often such work has to be redone. Sanyok does not know what firmware he is uploading, what parameters he changes, and how this will affect the operation of the motor. Sometimes you can win this lottery. But rarely.

The work of a tuning studio involves fixed costs, and the costs are high. They are associated with the acquisition of new equipment, almost every month something new comes out, you need to buy new protocols, tools for control. The same power stands work for tuners all the time, they wear out. The labor of specialists (good) working for them is also expensive. All this must be paid for.

You can't just download the firmware from somewhere. It needs to be developed (or bought), adjusted, it is necessary to make measurements on the stand, sometimes - life tests. All this is included in the cost of the program.

Didn't roll...

I went for chip tuning, gave money, but the car doesn’t drive a damn thing. I don't feel any gain!

There are such cases. This is especially true for owners of cars with atmospheric engines: it is difficult to feel a 10% increase. Although some do not feel an increase in 60 hp. The fact is that the driver “pommed” is not the most accurate tool. Athletes who tune cars before races can feel a change of even one horsepower, they know their engines very well, but "civilians" are usually not capable of this. Here it is necessary to take measurements before and after, sensations are a deceptive thing. And the absence of an increase is not always a fact.

“They broke my motor”

I came for tuning on an almost new car (which is ten years old, not beaten, not painted, without a run in the Russian Federation). Krivorukov specialists during work sealed up the oil channels on the crankshaft with chewing gum, and my 1.4 TSI, which can travel a million kilometers without repair, coked and stalled at the exit from the box. Now, because of these mediocrity, I have to repair the car.

Does it happen in life? Yes, sometimes. You can ruin the motor with the wrong setting for one, two or three. Even good motor can work after tuning just a minute and a half. It all depends on the tuners. Firstly, before tuning, it is necessary to diagnose the motor, identify all hidden and obvious malfunctions. Secondly, the program must not only be uploaded, but also configured for a specific motor: even stock hardware has its own characteristics.

However, even decent tuning studios make mistakes. Rarely, but there are. Here we must understand that with a large flow, a certain percentage of failures is inevitable. In addition, it happens that the engine has some kind of weak link that is difficult to diagnose, which can “break” just after tuning. Anyone who goes into tuning should be aware of this. And if you are afraid that something will go wrong, it is better to ride stock.

And you should never take on the chip tuning of a faulty car. The firmware will not cure either an oil leak or a dead lambda probe. First - repair, then - tuning.

For the good of the cause

I drive a Focus RS, everything suits me, but I have to pour in the 98th gasoline. Yes, oil is expensive. I have to save on “doshirak”, and it infuriates me. Okay, I'll do chip tuning, after which it will be possible to pour 92nd gasoline and 10W40 “mineral water” at 600 rubles per five liters. Then I will live.

As for oil, not really. But sometimes you can really change the brand of suitable gasoline. Of course, provided that the engine is structurally designed to use fuel with a different octane rating. First of all, its degree of compression matters. But there is another side of the coin.

The use of low octane gasoline will result in reduced power. And in order for the car to more or less drive, you will have to “press on the slipper” more strongly. Yes, gasoline can be filled cheaper, but its consumption will increase. So saving on this will not work.

Tuning or warranty?

Bought Hyundai i40 with two-liter engine. Chipanul, he showed almost 170 hp instead of 149 And rightly so: in Russia, he has a different firmware, with which you can get into the tax rate up to 150 hp. Everything is fine, but I lost the warranty.

Some dealers do not keep track of the installed firmware, others really consider chip tuning a reason to refuse warranty service. It is important what methods the manufacturer uses to protect against chip tuning on this moment. Literally two years ago, the verification was carried out by single dealers, now more and more manufacturers are implementing the software verification procedure.

But the tuning studio does not stand still. There are firmware that are tested for originality, and dealers cannot notice changes in the software. At the same time, it is impossible to “deceive” the dealer on some brands.

Now is the age of injection cars, this is far from being a carburetor (in which many functions were performed mechanically), this is a car stuffed with electronics. Management of many functions and parameters of the machine takes place. However, this block itself is just a set of pieces of hardware and microcircuits, you need to fill in a certain program or, as it is called “firmware”, which, according to special algorithms, will control all the main functions (for example, fuel injection, ignition, etc.). But the firmware is just a program that is sewn into the ECU chips, that is, this program can be changed, improved, made more optimized. It is this improvement and “flashing” of the firmware that is called the big word “CHIP TUNING”. But is it always good? Is it worth making such an improvement, what are the pros and cons, and will there be harm to the engine and other units? Let's figure out how there will always be a video at the end, so read on - watch ...

Many owners of "dead" cars simply dream of this kind of improvement. After all, chip tuning, especially on our VAZs, can be done by almost every person more or less versed in electronics, with a programmer, and even direct hands. We climb to the thematic forum, download the "super-turbo" firmware and VOILA - instead of the prescribed 80 - 90 horsepower, it adds up to 110 - 120 (or even more)! Well, not a fairy tale, right?

And now the news has already flown about what kind of VAZ engineers are bad, but they don’t know how to do anything, and in general their hands are growing their “zh.py”! But we are handsome, but we can do everything, the car is just “rushing” (finally, you can compete with Solaris at a traffic light), in general, there are only pluses.

By the way, this applies not only to our domestic cars, but also many other brands, from Renault Logan to cool BMW and Mercedes.

There is one rule (from observations) - no matter how much power you have, in six months you will want even more! For you are already accustomed to such engine power

So many of us dream of just shooting at traffic lights, although under the hood you have an engine of only 1.4 liters (or maybe even less). BUT with thoughtless chip tuning, there is a big chance to just kill the engine, catalyst, gearbox IN A VERY SHORT TIME! Let's understand in detail.

What is firmware

"Firmware" or more correctly called "firmware", this is a kind of operating system for our computer. Just as our home computer or laptop will not work without WINDOWS (it's just a set of hardware), so in order to control the car in the ECU, you need to install or download a special program that will control the entire car.

No need to think - that creating a microprogram is such an easy and relaxed process, and that every FORUM and "specialists" on it can just take it and create it from scratch! THIS IS EXTREMELY INCORRECT.

The firmware is created from scratch only by the manufacturer, THIS IS A REALLY COMPLEX PROCESS. A bunch of programmers and engineers are working on its creation. It's like writing WINDOWS from scratch, no one does this in garages and other "offices", it's simply unrealistic. But they simply break the existing program, and, in their opinion, improve which parameters.

However, I would like to say that there are OFFICIALLY several programs (firmware) specifically for your machine, for example, fixing any “bugs” by the manufacturer itself. But often you will be reprogrammed by licensed service or dealer centers themselves. However, if your warranty is over, then no one will notify you. Therefore, if you are thinking about doing chip tuning, ask if there are official fresh firmware.

How firmware affects power

It's different, depending on what you need. In general, the microprogram can be both “strangled” and vice versa “released”. What does this mean - yes, everything is simple, there is a "chip tuning" that will strangle your car, but it will become economical, that is, fuel consumption will decrease - but these are clearly not popular. But there is another tuning that will increase the power of your engine! And these are VERY STRONGLY in demand.

In fairness, it is worth noting that there are so-called normalized firmware - this is when a regular (stock) firmware is taken and slightly improved - fuel consumption is slightly reduced, power is increased, engine smoothness, etc.

However, as I wrote above, “normalized” and “economical” chip tunings are needed only by a few, all give more power, and there is where to roam.

In general, as you and I know, there are two large classes of engines - this. In turn, gasoline is divided into -.

If we look ahead, then the increase only with the help of firmware (chip tuning) can reach up to 30 - 40% of power, just think about it! Let's say you had 150 hp on a TURBO engine. and it became 180 - 200 hp!

In fairness, it should be noted that it is on turbocharged engines and it doesn’t matter whether it is gasoline or diesel, it is worth waiting for the maximum increase in power.

On conventional atmospheric engines, the increase is not so critical, yet ordinary "atmospherics" are often "chip" in order to remove the catalyst and remove "blunts" when "moving off" from a place that are due to environmental restrictions. However, it is possible to "shake" the power up to 15 - 20%.

If visit large companies who are engaged in chip tuning, then you can understand that the optimal increase in power is exactly 20 - 25%! Why understand below.

It seems that there are only pluses, even if you install a “normalized” firmware, then the characteristics will definitely improve. But why is there so much online negative reviews, THAT IS OPENLY MINUSES! Let's figure it out.

Pros and cons

Guys, I want to start with the cons and dispel a lot of myths that hover next to chip tuning.

To be honest, there are very few normal firmware (firmware) WHICH MAXIMUM increase the power of your engine. You need to be aware that when you change the settings in the ECU, the engine systems (and many others) will start to work completely according to different algorithms! Which in the end can really harm your motor, up to its failure!

Any firmware SHOULD be run in with measurements of many parameters before being applied on hundreds or even thousands of machines! The manufacturer knows this and does it, but TUNING offices (even the most eminent ones) are often NOT!

What happens in the end. You bring fresh or even new car(under warranty) to such a company, they do chip tuning for you and you leave. You are assured that their firmware is BRANDED, that they make it almost in Germany, Korea or Japan (in the general country of the manufacturer), and it is absolutely harmless, BUT WILL UNLOCK THE ALL POTENTIAL OF THE ENGINE. And indeed the car starts to “fall”, the power increases, the consumption (as a rule) also increases, but not critically, you are happy “like an elephant”. But after 5000 - 10000 kilometers, either the engine, any catalyst, or the gearbox is covered, especially if it is automatic. But why? What happened?

Guys, no one thinks about the parameters of this firmware and how it affected your engine. YES, it can have a large fuel supply, and an enrichment of the mixture, which at certain speeds will give more power. BUT by what means? How will this mixture affect, say, valves, engine temperature, catalyst, detonation, etc.?

If chip tuning is not done correctly, then I will list the points:

• Rich mixture valves can burn out
• Engine due incorrect injection, can heat up more, which can lead to its overheating, especially in the heat, in traffic jams in summer
• If the mixture is enriched, then its combustion temperature may be higher and the exhaust gases may simply melt the catalyst. So the normal temperature, say in 2-3 gears, is about 500-600 degrees Celsius, but with the wrong chip tuning, it can reach up to 900 degrees, CRITICAL for the catalyst
• Detonation. The knock sensor will just scream! But in the normal state, the “CHECK ENGINE” icon will show you this, but in the firmware it can be tritely turned off. And detonation is a really destructive process for the motor as a whole.

A separate and VERY BIG MINUS is the transmission ! Here it is worth explaining in more detail. See often the gearbox (again, if it is especially -) is designed for a certain. Of course, they have a small backlog, but it is really SMALL! It often happens - the firmware is specially “strangled power unit"so that it cannot harm the transmission, this is done on adjacent models or on the same model, but with different motors(for example 1.6 and 2.0 liters).

Now what is being done by the firmware - yes, this restriction is tritely removed, and the car starts to fly, BUT! The gearbox is not designed for such a torque, and it simply breaks. And it happens that the shaft breaks - just think about it.

BUT, of course, no one will ask you - WHAT TORQUE IS YOUR GEARBOX DIGESTING, AND WHAT GROWTH THE NEW FIRMWARE WILL GIVE!

Therefore, there are also plenty of minuses in chip tuning, especially if you do it yourself by downloading the firmware from a forum or a “verified” site.

So is it worth it or not?

The question is not unambiguous. There are really professional companies that are engaged in COMPETENT CHIP TUNING, but there are only a few such companies in our country and neighboring countries. The cost of their services often just rolls over, AFTER REALLY COMPLETE FIRMWARE and the work of replacing it is worth running in big money. This is not “Uncle Vasya” in the garage with a netbook bought for 1500 rubles. They will give you a guarantee for their work, and present all the graphics. For example, the “curve” of increasing power, the readings of the knock sensor, the readings from the catalyst sensor, the calculation of the power so as not to damage the transmission.

It is because of the transmission (sometimes because of the catalyst and turbine) on turbocharged engines that SERIOUS COMPANIES INCREASE POWER MAXIMUM BY 20-25%, although it is possible up to 40%

In our country, you can install foreign firmware, which is dictated by our legal restrictions. What do I mean, for example - let's take the same Hyundai Creta with a 2.0 liter engine, in our country to transport tax was not like that big power stung at the level of 149 hp, although, for example, in China, the Hyundai IX25 (essentially the same Creta) has a power of 165 hp! That is, our manufacturer deliberately "cut" the characteristics in order to fit into an acceptable tax burden. If you make chip tuning from "IX25" (official), and even find a normal company, then it's really powerful to add about 10% of power, without any serious consequences for the car.

At the end of the last century, motorists had the opportunity to improve dynamic characteristics vehicle without damaging the internal parts of the vehicle. Chip tuning - tuning the operation of electronic engine controllers to increase engine power.

What is engine chip tuning?

To put it more simply, chip tuning is an electronic engine control unit for a car. This is done to improve the characteristics of the settings. vehicle. Chip tuning does not require technical or mechanical changes. Here you should only work with the engine ECU.

With the help of chip tuning, the car owner can change the amount of fuel that is injected into, enrich the working mixture, change the ignition angle and boost pressure. To do, you do not need a lot of free time. A specialist can carry it out even in an hour.

The computer is connected to the computer through a special connector. In a special program, the user can manage the system settings. The process of flashing and synchronizing data from the device is in progress. A person must know exactly what changes he will make. After that, the process of recording a new program takes place. Once everything is completed, you need to check the operation of the car.

Chip tuning is most often done to increase engine power and reduce vehicle fuel consumption. It is performed for any injection motors. There are exceptions in the form of some Japanese-made units. If you look at the whole, then there is no difference between the chip tuning of a domestic or foreign car.

Chip tuning can be done on motorcycles, yachts, boats and modern tractors with an ECU. After this procedure, the engine power reserve increases. It allows you to activate the hidden potential of the vehicle's motor. Correction of the engine is also carried out using chip tuning.

Chip tuning involves tuning the chip. due to it, the vehicle ECU database is updated and modified. They are stored in two-dimensional and three-dimensional tables. Due to the special position, the engine control units differ. The number of tables in them may not match, which indicates different manufacturers. Special software allows you to change data in electronic systems cars.

Cars of our time are equipped with a special OBD port, which allows you to make changes to the ECU without removing it. On some vehicles, on the contrary, you can only correct the data by removing the chip. For such an operation, it is necessary to work with a highly qualified master. But no matter how it is done, the result will be excellent.

You should not contact those companies in which you doubt. Insufficient qualification of the worker can disable the computer. Sometimes the firmware is not made the way it should be. Auto repair shops drive the car to a special stand and, through a special program, simply adjust the factory settings. Not all workers know that there may be several blocks in the machine that are closely related to each other. Therefore, if there have been changes in one, then they need to be made in the other.

Advantages of engine chip tuning

Due to chip tuning, a car owner can increase power by about 10 percent and no more. We can say that this is one of the best ways to improve the vehicle in a short time and at minimal cost.

So, what are the positive aspects of chip tuning a car engine?

• The speed and traction increase, which makes it easier and easier to drive the machine. The car will listen and respond better.
• Acceleration will increase, which will have a positive effect on driving on busy roads.
• If the car is heavily loaded and the ride is accompanied by the included climate control, then the ease of movement will become a little more noticeable. Chip tuning will increase the power reserve of the unit over time.
• Chip tuning happens quickly, which can win over such procedures as forcing, upgrading.
• It is easier and cheaper to make it because there is no need to make structural changes to the engine.
• Chip tuning can be canceled by resetting to factory settings. This is especially true when there are some bad consequences.
• Accessing changes from such a procedure is very easy. Many specialist workshops do not need to receive large volumes of data from the vehicle. Because of this, vehicles can be easily serviced at dealerships and service stations.
• Chip tuning allows the car to function easily with a specific fuel. This feature provides the machine with the hidden potential of the engine.
• It is also possible to adapt the vehicle to the installed additional parts and assemblies to the motor. Here, special settings are simply made that will provide optimal performance the whole car.
• Chip tuning is able to make various changes for a certain driving style of the driver. Here you can adapt the ECU for both economy mode and fast driving. Combined settings are very popular.

Cons of engine chip tuning

Concerning negative aspects, so here they are a little less. Some of them can reduce the interest of the car owner.

1. If chip tuning was done by a non-professional, then this can adversely affect the operation of the engine control unit. In the worst case, the ECU will fail completely.
2. The working life of car engine parts is slightly deteriorating. Approximately this figure is 3-4 percent.
3. With poor chip tuning, there is a risk of increasing fuel consumption by almost 20 percent.
4. It very rarely happens that due to a failure in the computer, more than 6-7 percent of all available programs start to work incorrectly. Such a failure can lead to catastrophic consequences.

So far, no one has noticed other problems during chip tuning. If we consider as a whole all the negative and positive aspects, then the scales are clearly leaning towards the pluses. In addition, the price of such pleasure is quite acceptable, but more on that below.

One hundred percent worth doing chip tuning in the case when the factory firmware has flaws.

engine chip tuning cost

As you might guess, the cost of chip tuning directly depends on the brand of the car. The year of manufacture, the name of the model and the characteristics of the vehicle's engine are also very important. One of the most basic factors that affects the price is the person who produces the firmware. It can be anyone: a workshop, a dealership, a private employee or a car service worker.

Prices vary widely. There is chip tuning from 2000 to 10000 rubles. It must be understood that value is not indicative of high quality process. Self-taught masters can often do a much better job than employees dealer center. But not everyone has good and expensive equipment for this procedure, so the prices differ.

Nowadays, chip tuning is performed by most car manufacturers. So now this operation is official. It is best to do it exactly where you are sure of the quality and professionalism of the master. You should not skimp and save money, but overpaying is not always reasonable in the case of chip tuning.

If you decide to do it yourself, then it is better to consult a specialist, because incorrect settings can lead to a malfunction of the car. For chip tuning it is better to buy professional equipment, which does not require special skills to use it. Having done this process several times, you will no longer need to contact a car service.

In recent years, chip tuning has become increasingly popular. Chip tuning is now being done by many different specialized and non-core technical centers. Even garage services perform reconfiguration of the engine control unit, promising their customers a noticeable increase in power and other engine characteristics. But is it? Is chip tuning worth it, and if so, where to apply for this service? Our review will answer these and other questions.

Many of the car owners know that all modern cars equipped with an electronic engine control unit (ECU) that controls the vital functions of the car. This also applies to the mode of operation of the engine. Naturally, for the operation of the engine in electronic device a special program is responsible, which, if desired, can be slightly modified or completely installed with your own program shell.

Why is the process of reconfiguring the engine control unit called?

The fact is that at an early stage of the appearance of electronic control units, in order to change the settings in the program, specialists most often needed to replace the microchip responsible for the operation of the motor. As a result of the chip replacement, a modified version of the software is responsible for controlling the engine.

Today, most often for chip tuning there is no need to change the chip with the tuning program. Thanks to modern technologies chip tuning can be done by almost any driver by using a special program installed on a laptop, tablet and even a smartphone by connecting them to the diagnostic connector.

Moreover, the tuning software environment can even be downloaded on the Internet in various forums and social media communities. As a result, many garage chip tuners have appeared in our country, which offer their services for inexpensive car chip tuning. By the way, this type of chip tuning is the cheapest and takes a minimum of time. Usually, such a simple process of chipping the “brains” of a car looks like this:

• - Choice of program for chip tuning
• - Connecting a computer to the car's OBD connector
• - Overwriting the factory program to your own or selectively changing the program settings (on average, the process takes 20 minutes)
• - Also, if desired, you can restore the factory settings of the engine control unit

But the problem is that the quality of these services leaves much to be desired. We do not recommend cheap chip tuning by such specialists, whose qualifications often leave much to be desired. Yes, we do not argue that in Russia there are a lot of Kulibins who can do high-quality chip tuning. Only, unfortunately, such "electronic engineers" can be counted on the fingers. Most often, car chipping services are offered by not very advanced car repairmen. Also keep in mind that a good chip tuning program costs a lot of money. Naturally, if you are offered a cheap service for chipping the “brains” of a car, then you should think about whether you need to agree to this.

Remember that improper chipping of a car can not only lead to failure of the engine control unit, but even to problems in the operation of the engine, and you yourself understand what is fraught with.

Therefore, we recommend that you apply for a chip tuning service only to large and well-known technical centers or to private proven masters, about which there are positive reviews from your friends or on specialized forums on the Web.

There is, of course, a deeper chip tuning, which we previously talked about in the article.

In addition, Superchips Bluefin chip tuning is currently gaining popularity, which can also be done independently (if you are familiar with a computer and with a car device).

In fact, Superchips Bluefin is portable equipment with which the owner of a car can flash his car himself, without resorting to chip makers for a service. Moreover, the firmware process itself is as simple as possible and takes no more than half an hour.

There is also a RaceChip module built into the wiring (connection to the sensors) of the car as an additional engine control unit (ECU). As a result, an additional connector appears in the car, a special connector is connected to it. the electronic unit controls that you can use to customize various options fuel injection, air supply and other engine settings. Including in some RaceChip models, it is possible to control the settings using a smartphone.

And, of course, some official dealers also offer their services for reconfiguring the engine control unit. True, as a rule, this type of chip tuning does not involve the installation of new additional chips or a deep reconfiguration of engine operation parameters. Usually dealer tuning consists of changing several settings.

In other cases, for a more global chip tuning, you will have to contact unofficial technical centers.

Why chip your car?

There are two main reasons why many car owners want to chip tune their car. We are talking about an increase in power and a change in the maximum torque of the engine at certain speeds.

But why change the factory settings? What will it give?

The thing is that when your car left the factory, then, most likely, it came out wired into the ECU microchip with software that does not assume the maximum possible power car. That is, the manufacturer initially limits the power of many cars to meet the goals of a particular planned model. Also, power limitation is necessary to achieve a certain economy.

Accordingly, in modern vehicles these days, power and other performance characteristics are generally limited not by any specific mechanical factors, but by the usual software settings that are installed on a microchip inside the engine control unit (ECU).

Computer algorithms control engine operation by influencing parameters such as ignition timing, air/fuel ratio in the combustion chamber ( fuel mixture), turbine boost pressure, etc.

So if you want to increase your productivity modern machine or make it more economical, you don't need a deep mechanical upgrade. Today, chip tuning of the engine control unit is enough for this.

For example, if your car is equipped with a turbine, then with the help of chip tuning you can reduce fuel consumption by an average of 7-10%. This can be done by reducing the availability of maximum torque at certain engine speeds. Accordingly, with this setting you should reduce the power of your engine. But thanks to this, you will improve the efficiency of the machine.

If you are not satisfied with the performance of the car, then, on the contrary, you can add maximum torque at certain engine speeds. In this case, you will increase the power of the car. True, then the consumption of the car will be more. As they say, you have to pay for everything.

For example, with RaceChips chip tuning, the chipmaker is promising that the 2007 Mondeo 2.0 TDCI will get an extra 25 hp. With. and 61 Nm.

If you buy a more expensive chip, you can increase the power to 40 hp. with., and torque - up to 90 Nm.

With Superchips equipment, for example, for the SEAT Leon (1.2-liter TSI model), the car owner can add up to 20 hp. With. and 36 Nm.

Including you can turn to various specialists who will chip your car on their equipment, simply by connecting to the engine control unit and reconfiguring some parameters in the “brains”. However, at the same time, do not count on a noticeable increase in power.

For a more significant increase in efficiency, in any case, you will have to install an upgraded program either by completely flashing the “brains” of the car, or by replacing the factory microcircuit with a tuning chip.

Cons of chip tuning

Some car owners are afraid that after chip tuning the engine control unit, problems may appear in the car. Yes, this is true if chipping was carried out by unskilled specialists using low-quality equipment and a non-original program. If you carry out chip tuning in a well-known company on the market, which other car owners speak positively about, then nothing threatens your car.

For example, in a serious technical center that deals with chip tuning, specialists, before chipping, check whether the new program in the ECU will affect the operation of the engine and whether the new non-factory parameters of the engine will lead to its failure or increased wear . So, after changing a number of settings in the ECU control unit, chiptuners should always check whether the temperature or pressure of the engine exceeds allowed parameters. Unfortunately, such a check is often neglected by chip makers who offer their cheap services in various garages. Remember that changing some settings in the engine management program can affect other parameters of the engine, which can lead to serious problems.

However, this does not mean that chip tuning should be ignored. Especially since today most modern cars leave the factory with reduced power. In fact, many cars these days can be made more powerful or more economical. Just in order to carry out chipovka, you need to contact only proven specialists.

Pay attention to modern cars. You are probably aware that some new models entering the market often come with the same engines, but with more power. This is usually due to the fact that automakers often limit the power of earlier models of cars, and then each new version car gradually add power. So limiting the capacity at the plant is not only a concern for the environment, but also a purely marketing technique.

Chip tuning also allows you to give the engine a much greater performance.

However, you need to understand that by chipping your car, you will get an increase in fuel consumption with an increase in power, unless, of course, you are chipping a car in order to reduce consumption. In this case, specialists will reconfigure the parameters of the engine control unit in such a way as to reduce the power of the machine. So, as you can see, the laws of physics cannot be changed, and by gaining something, we lose something anyway. Therefore, everyone must decide for himself whether it is worth chip-tuning his car.

How much does a car chip tuning cost?

As we have already said, it all depends on the type of chip tuning and on the place where you will upgrade the operation of the engine control unit. Again, some dealers offer their own reconfiguration of the ECU program.

But usually their chip tuning consists of a maximum of the usual setting of some parameters of the engine control unit. However, despite the simplicity of such pseudo-chip tuning, be prepared to pay the dealer a round sum. If you want to do a deeper chip tuning, then you will have to contact a specialized technical Center or to another place where you will have a complete reconfiguration of the engine using a complete ECU chip.

Also, the cost of chipping depends on. Including the final cost of such services is influenced by your preferences.

For example, if you want to add maximum power or maximum torque to the car and then test it on a special stand or arrange real tests of the car on the track, then be prepared to part with a lot of money, since post-chip tests are very expensive.

So the prices for chip tuning vary quite widely, ranging from cheap garage chipping, which can cost only a few thousand rubles, to complex chip tuning work, including preliminary diagnostics, chip tuning and subsequent tests, which can go into one ten thousand rubles.

By the way, testing the car after chipping allows you to immediately understand whether you are satisfied with the work of the new program that controls the car engine. For example, if you do not like how the engine works after chipping, you can ask to slightly reconfigure some engine control parameters or reflash the “brains” to a new program.