The service life directly depends on the quality of the oil being poured and its replacement intervals. power plant Toyota Camry 40. Even the most gentle driving mode will not save the engine from excessive wear if the rubbing surfaces operate without sufficient lubrication.

Therefore, during the operation of the machine, it is important to monitor the oil level, observe replacement intervals and use only well-proven products for filling.

Review of Toyota branded oil

Toyota Motor Corporation produces a line of motor oils for its cars. They differ in price, viscosity, base, number of additives and their properties.

One of the most suitable for Camry 40 is synthetic oil Toyota 08880-10705. This lubricant is used all year round. It has good antioxidant and detergent properties. The oil showed excellent performance when used in conditions low temperatures. It perfectly performs its functions regardless of external factors. Most this oil Suitable for Camry with 3.5 liter engine.

Car enthusiasts who boost their cars also speak highly of Toyota 08880-10705. It perfectly lubricates rubbing surfaces in engines experiencing excessive loads.

Semi-synthetic oil from Toyota Motor Corporation has a lower cost, but is not particularly inferior in its characteristics to synthetic-based lubricants. It is also all-season. Car owners note that the use of Toyota08880-10605 oil is most optimal in 2.4 liter engines.

Oil with low viscosity is more suitable for cars with low mileage. Car owners note that on the Camry 40, whose odometer shows more than 150 thousand kilometers, the Toyota 08880-10505 bay leads to a large oil reservoir. Overall the oil is good and fully performs its intended functions.

In the case of engines with significant mileage, it is recommended to use mineral oil. Toyota 08880-10805 performs well only on engines that are subject to major overhaul in the near future. Otherwise, car owners do not recommend using it, because:

• oil consumption increases;
• the engine starts more difficult, especially in the cold season;
• The lubricant change interval must be halved.

Toyota synthetic oil “Engine Oil 5W-40” is intended for use in European cars. Pouring it into American and Arab women will not end in anything bad, but the consumption can be significant.

Toyota "Engine Oil 5W-40"

The synthetic Toyota “Engine Oil” oil shown in the photo below, unlike the previous oil, was developed primarily for cars manufactured by Toyota Motor Corporation. It has fewer certificates, so the price is lower. Performance properties Toyota "Engine Oil" are at a fairly high level

Toyota "Engine Oil"

Price per original oil Toyota Motor Corporation starts from 1600 rubles for 5 liters of mineral water, from 1800 for 5 liters of semi-synthetics and from 2500 rubles for a similar canister of synthetics.

Engine oil for Camry 40 from other manufacturers

Reviews about branded oil Toyota Motor Corporation is quite controversial. Some car owners use only the recommended oil, but there are drivers who believe that there is a better lubricant. Toyota does not prohibit the use of third-party fluids.

According to reviews from car enthusiasts, a table of the best analogues of native oil has been compiled. The selection of lubricants takes into account not only manufacturers, but also the year of manufacture, as well as other operational parameters.

The cost of oil from the above companies ranges from 1000 to 3000 rubles per five-liter canister.

Oil change schedule

• for mineral - every 5 thousand kilometers;
• for semi-synthetics and synthetics - 10 thousand km.

If the car has not covered this distance in two years, it is necessary to change the lubricant, regardless of the mileage.

According to the recommendations of car owners, oil changes should be halved. This is especially true for cars that are often in city traffic jams or off-road. A sporty driving style also requires more frequent maintenance.

In some cases, for example, after overheating or water getting into the lubricant, the oil needs to be changed ahead of schedule. To diagnose the condition of the lubricant, it is recommended to drop oil onto a napkin. By the shape of the blurred spot, you can determine its condition.

Determining the condition of the oil by a stain on a napkin

When diagnosing oil condition, there are four control zones to consider, as shown in the image below.

Toyota Camry 40 refueling volumes are shown in the table below.

The manufacturer allows oil consumption of up to 1 liter per 1000 kilometers. Most car owners do not believe that this tolerance is too large and the engine should be repaired if a 2.4-liter engine consumes more than 200 grams of oil per 100 km, and a 3.5-liter unit consumes more than 350 grams over the same distance.

DIY oil change process for Camry 40

The engine oil is changed according to the instructions below:

1. Remove the crankcase protection.
2. Unscrew drain plug. The old lubricant poured into the engine will flow out of the hole.
3. Wait until the oil drains.
4. Replace the filter.
5. Screw in the drain plug.
6. Pour fresh oil into the engine.
7. Start the engine. A signal indicating that the oil pressure should not be below normal after a couple of minutes of operation power unit.
8. Check its level. The oil must be within tolerances between the upper and lower marks of the dipstick.

Car manufacturers pay great attention to consumables, the operating instructions indicate all the necessary lubrication parameters. Car enthusiasts, when choosing oils for summer or winter, must take into account the requirements of car manufacturers, otherwise the engine may quickly fail. We invite you to familiarize yourself with the parameters of the recommended engine oil for Toyota Camry.

1994 model

The Toyota Camry automaker insists on using universal lubricants of the SG or SG/CD class according to the API system. To select the viscosity, you must use scheme 1.

Scheme 1. Predicted range of temperatures outside the car until the next oil change.

In accordance with scheme 1, when the thermometer reading is above -23.5 0 It is recommended to fill with liquids 10w-30, 10w-40, 10w-50. If the thermometer reading is above -12.5 0 C, then it’s worth pouring 20w-40, 1-20w-50. At temperatures below +10 0 You need to use 5w-30 fluid.

Refill tanks taking into account the oil filter are:

• 3.8 l for 5S-FE auto engines;
• 4.5 l if the engine is 3VZ-FE;
• 5.0 l corresponds to 1MZ-FE car engines.

Toyota Camry XV20 1996-2001

1998 model

• for 1MZ-FE motors, SH class lubricant according to API standards;
• for 5S-FE car engines, motor fluids of group SG and higher; in the absence of woven motor oil, it is permissible to pour class SF.

To select the viscosity parameters of the lubricant, Scheme 2 is used.

Scheme 2 Predicted temperature range outside the car until the next oil change.

In accordance with scheme 2 at a temperature range above -18 0 It is necessary to use lubricants 15w-40 or 1-20w-50. If the thermometer is below +10 0 C, use 5w-30 motor oils.

Refill containers:

1. Auto engines 1MZ-FE:

• 5.5 l dry engine;
• 7 l with oil filter change.

1. Motors 5S-FE:

• 4.3 L dry engine;
• 3.6 l with oil filter change.

Toyota Camry XV30 2001-2006

2005 model

1. According to the API system, groups SJ or SL, having a viscosity of 20w-50 or 15w-40, are used at air temperatures above -12.5 0 C (see diagram 3).
2. In accordance with the API classification, classes SJ or SL, designated “Energy Conserving” or universal motor oils certified according to ILSAC. The applied viscosity of such lubricants is 10w-30 at temperatures above -18 0 C, or 5w-30 if the air temperature is below +10 0 C. When choosing a viscosity indicator, take into account diagram 3.

Diagram 3. Estimated temperature range before the next oil change.

The amount of lubricant that will be needed during subsequent replacement is:

• 3.8 l with an oil filter or 3.6 l without an oil filter for 1AZ-FE engines;
• 4.3 l including filter or 4.1 l without oil filter for 2AZ-FE engines;
• 4.7 l with an oil filter or 4.5 l without an oil filter in the case of 1MZ-FE engines.

The approximate volume of lubricant that needs to be added so that the lubricant level is between the lower and upper level marks on the Toyota Camry dipstick is:

• 1.0 l for 1AZ-FE engines;
• 1.5 l in the case of power units 2AZ-FE and 1MZ-FE.

Toyota Camry XV40 2006-2011

2008 release

1. All-season motor fluids with the designation “Toyota Genuine Motor Oil” or motor oils with similar parameters, having the appropriate markings or approvals on the canister.
2. According to API standards, acceptable lubricant classes are SL or SM. Viscosity parameter according to the SAE system 20w-50 or 15w-40 at a temperature above -12.5 0 C (temperature selected according to scheme 4).
3. In accordance with the API classification, types of motor oils are SL or SM, designated “Energy Conserving” (energy-saving) or all-season lubricants according to ILSAC. Viscosity is selected 10w-30 when the thermometer reading is above -18 0 C, or 5w-30 if the air temperature is below +10 0 C (temperature indicators are taken from diagram 4).

Scheme 4. Dependence of the viscosity index of motor oil on the temperature of the region in which the car will be operated.

Refill tanks for Toyota Camry:

1. Engine 2AZ-FE:

• 4.3 l with oil filter;
• 4.1 l excluding oil filter.

1. Auto engine 2GR-FE:

• 6.1 l with oil filter;
• 5.7 l without oil filter.

Toyota Camry XV50 since 2011

2013 model

According to the operating instructions lubricating fluid for Toyota Camry engines - this is original Toyota oil or lubricants from other companies that have the parameters required by the car manufacturer. The class, type and viscosity of the oil are determined by the type of engine.

Power units 6AR-FSE and 2AR-FE

According to the manual, it is necessary to fill in oils with a viscosity index of 0w-20, 5w-20, 5w-30 or 10w-30, corresponding to classes SL or SM with the designation “Energy Conserving” (energy saving) according to the API system. It is acceptable to use universal lubricants certified according to ILSAC and having a viscosity parameter of 15w-40. You can also use motor oils of groups SL, SN or SM according to the API system.

To select the viscosity depending on the temperature outside the car, use diagram 5.

Scheme 5. The influence of air temperature on the selection of motor oil viscosity.

According to scheme 5, at extremely low temperatures it is necessary to fill in lubricants 0w-20, 5w-20, 5w-30. Motor oils with a viscosity parameter of 10w-30 or 15w-40 should be used if the thermometer is above -18 0 Otherwise, starting the engine will be difficult.

The volume of engine oil required during replacement is 4.4 liters including the oil filter and 4.0 liters without replacing the oil filter.

Auto engines 2GR-FE

• SL or SM with the designation “Energy Conserving” (energy saving);
• SN marked “Resource-Conserving” (resource-saving).

You can also pour lubricants certified by ILSAC and having a viscosity parameter of 15w-40 or use oil groups SL, SM and SN with the recommended viscosity index.

You can select the viscosity parameter according to scheme 6.

Diagram 6. Predicted temperature range until the next engine fluid change.

According to scheme 6, at extremely low temperatures it is necessary to use 5w-30 lubricants, and when the thermometer is above -18 0 C, pour 10w-30 or 15w-40.

The volume of engine fluid required when replacing is 6.1 liters with oil filter replacement and 5.7 liters excluding the oil filter.

Conclusion

Applying the recommended motor oil for Toyota Camry, you can increase the life of the engine and lubrication system. The fact is that the lubricant creates a protective film on the surface of the internal elements of the car engine, the properties of which depend on the quality parameters of the lubricant. The thicker the car oil, the thicker the protective film will be; such oils should be used in the summer; thinner lubricants are used in winter; they ensure cold starting of the engine. If you use an oil that does not match the parameters, the film may break and the engine will start to run “dry” - this will lead to its breakdown.

When replacing lubricant, consider:

• The manual indicates the reference volume of oil that will be needed when changing the lubricant, in real conditions it may be slightly different;
• Overfilling the vehicle oil above the maximum mark on the dipstick is unacceptable, therefore, after adding lubricant, it is necessary to check the lubricant level.

Watch a video on how to change the oil in a Toyota Camry with your own hands:

Recommended engine oil for Toyota Avensis

Camry XV30 before restyling

• 0 1AZ-FE – 3.6 liters without filter replacement, 3.8 liters with filter,
• 4 2AZ-FE – 4.1 without filter, 4.3 l with oil filter replacement,
• V6 3.0 1MZ-FE or 3.3 3MZ-FE – 4.5 without, 4.7 with oil filter.

Diagram for choosing Camry XV30 oil viscosity depending on temperature

It follows from this that, at temperatures before the next replacement of -7 and above, lubricating fluid 20W-50 or 15W-40 should be used. If the temperature ranges from -18 above, pour 10W-30. Lubricant with index 5W-30 should be poured at temperatures from +10 and above.

According to the API gradation, motor oils of the SJ or SL category should be used. These data are indicated on the packaging.

Camry XV40

Volume of lubricant required for replacement in engines:

• 4 2AZ-FE – 4.1, 4.3 liters without replacement and with replacement of the oil filter, respectively,
• 5 2GR-FE – 5.7 without, 6.1 with replacement of filter material.

Diagram for choosing Camry XV40 oil viscosity depending on temperature

It follows from this that if, before the next replacement, the motor will be operated in a region with temperatures of -10 and above, fill in lubricant with a viscosity of 20W-50, 15W-40. If the temperature ranges from -18 and above, a lubricant with index 10W-30 should be used. If the temperature drops even lower and does not rise above +10 degrees, fill in with 5W-30.

The manual also says that oils labeled “Toyota Genuine Motor Oil” are suitable for all-season use. Motor fluids different seasons, use classified APIs with the SL or SM index.

Camry XV50 (55)

Good looking

Engines 2.0 6AR-FSE and 2.5 2AR-FE

The volume of oil required for replacement is the same for both power plants:

• 2.0 6AR-FSE and 2.5 2AR-FE – 4.1 without replacing the oil filter and 4.4 liters including the oil filter.

Camry XV50 oil viscosity selection diagram for 2.0 engine

At very low temperatures, lubricants with indexes: 0W-20, 5W-20 and 5W-30 are suitable. If ultra-low temperatures are not expected before the upcoming replacement, then 10W-30 and 15W-40 grease can be used.

API requirements also apply to motor oils. SL or SM lubricants with the Energy Conserving designation should be used.

Engine V6 3.5 2GR-FE

When changing the oil in a V6 3.5 2GR-FE engine, 6.1 and 5.7 liters of lubricant will be required when replacing with and without a filter, respectively.

The scheme for selecting lubricant viscosity for the Toyota V6 3.5 2GR-FE engine differs from the scheme for smaller power units.

According to the diagram provided in the manual, 5W-30 oil should not be used at temperatures above +10 degrees. A lubricant with this viscosity is suitable for the lowest temperatures. Lubricant 10W-30 or 15W-40 is suitable for temperatures from -12 and above.

Also, lubricant for the Toyota V6 3.5 2GR-FE engine must comply with API standards:

• SL or SM “Energy Conserving” (energy saving);
• SN “Resource-Conserving” (resource-saving).

How to identify original Toyota oil by the appearance of the packaging?

In the CIS countries, car owners are more concerned about the issue of oil authenticity. Because often a fake is passed off as an original.

We will briefly tell you how to distinguish original motor oil from counterfeit ones by external signs.

Plastic canister

To appearance plastic 5-liter canister to distinguish the original from the fake, study the following.

• Lid. The real lid differs in color (the fake one is much lighter) and stamping, which is clearly visible in the photo.

• Plastic color. The original packaging is light gray glossy. The fake one is darker and doesn’t shimmer as much.
• Marking on the bottom. On a real canister, all the symbols are clear and easy to read. The non-original is blurry and blurry.

• Stickers on the canister. On the back side there is a multi-part sticker, the top layer peels off easily, you can easily read what is written inside. The top layer of a fake peels off poorly, can tear, and does not stick back well.

Metal containers

There is a stereotype that lubricant in metal containers is counterfeited less often due to the fact that a tin canister is more expensive to manufacture. Maybe this was once the case, but now you can buy fake oil in metal.

On the left is the original, on the right is the fake. the difference in the color and texture of the metal is noticeable

We list a few differences between the original in a tin container and the fake:

• Metal color and texture. This is clearly visible in the photo.
• Pen. In the original it is fastened neatly, in the fake it is noticeable negligence.

Fake on top, original on bottom

• Weld seam. For a real canister it is processed perfectly, but for a fake it is a completely different matter.

Video

3 4 5 Best price offer

Consumables, which include engine oil, have a huge impact on engine life. If you pour anything into the car, as cheaply as possible, then very soon you will see a response - the oil channels will lose their permeability (they will simply be covered with thick resin mastic formed from the burnout of low-quality oil) and the engine will begin to wear out. The camshaft will be the first to feel oil starvation, but even if it can withstand it, very soon all friction pairs in the engine will reach critical wear, and this only means complete major renovation or, for those who are especially “lucky” - replacing the engine due to the impossibility of restoring it. By comparing the cost of repairs and the best motor oil you can buy, you will immediately get an answer as to whether it makes sense to fill the engine with fluids of dubious quality and origin.

The car manufacturer usually specifies what kind of oil your car's engine needs. At the same time, you should always consider the conditions in which you operate your car. For example, for the 2010 Toyota Camry it is recommended to fill it with SAE 0W-20, but if you are in more southern latitudes, where the temperature in the summer is constantly above 30 degrees, the oil with such parameters will be too thin, which in itself can harm the engine. In such conditions, you should fill in a more average option - 10W-30.

In addition to viscosity, the quality composition of the oil has a great influence on engine performance. According to the existing API grading, motor oils come in the following classes:

• SL is an environmentally friendly and energy-saving lubricant for modern engines, including turbocharged ones, using lean fuel mixtures;
• SM – practically does not change characteristics with decreasing temperature, protects against the influence of friction and oxidation of the friction pair;
• SN – energy saving, low content of phosphorus-containing components;
• SH – for cars whose production year starts from 1994. Prevents the formation of corrosion, soot, and oxidation, and also protects against wear;
• SG - This oil's additives resist corrosion. Not recommended for use in vehicles manufactured before 1989;
• SG/CD – suitable for petrol and diesel engines, which are operated under extreme operating conditions. Oils of this type have a high percentage of sulfur content.

Below we will present to your attention a review and rating of the best motor oils that you can safely fill in your Toyota Camry. When choosing, we took into account the manufacturer’s requirements, recommendations of engine specialists, oil characteristics, and, of course, great experience use of lubricants of these brands by owners of Toyota Camry cars.

The best synthetic oil for Toyota Camry

Synthetic oils today are the most suitable for lubricating modern engines. They are distinguished by high cleaning properties, resistance to polymerization (the appearance of a varnish-like film) and at high temperatures and pressure they retain their lubricating properties. Below are presented to your attention best oils of this type, which can be safely poured into the Toyota Camry engine.

5 ZIC X7 5W-40

Best price
Country: South Korea
Average price: 1130 rub.
Rating (2019): 4.6

High-quality motor oil ZIC X7 5W-40, based on own development company in the form of YUBASE synthetics, will be the best protection option for most modern engines, including for the Toyota Camry engine. The best performance characteristics ZIC X7 5W-40 lubricant provides a highly effective set of additives, including temperature stabilizers. They give the oil increased resistance to burnout, as a result of which the lubricant demonstrates optimal functionality even at minimum temperatures (down to -30°C).

A distinctive feature of the ZIC X7 5W-40 engine oil is the ability to maintain the thinnest protective film on the surface of parts even when the car engine is not running, thanks to which all important components receive timely lubrication. This oil provides the engine with the best care and extends its service life, regardless of climatic conditions, driving style, road surface conditions, etc. The car engine will always remain perfectly clean thanks to the excellent dispersing properties of this lubricant. Among other things, pouring ZIC X7 5W-40 oil into a Toyota Camry ensures a reduction in emissions of harmful substances into the atmosphere. The high environmental friendliness of the lubricant product is ensured by the compliance of the additive components with Low SAPS.

4 Motul 8100 X-cess 5W-40

The most economical. Optimal choice for cars with high mileage
Country: France
Average price: 3745 rub.
Rating (2019): 4.6

Innovative technologies have allowed Motul developers to provide the 8100 X-cess 5W-40 universal motor oil with excellent performance characteristics that guarantee optimal performance in terms of engine protection. At the same time, this lubricant has the most environmentally friendly composition and contributes to a significant reduction in fuel consumption, which, in turn, also has a beneficial effect on environment. However, the domestic car owner is much less concerned about these parameters than is unacceptable high consumption engine oil, which sooner or later appears in any used engine.

Having started regularly filling the Toyota Camry 8100 X-cess, some owners, judging by the reviews, managed to reduce the “appetite” of the engine. This allows us to speak cautiously about successful attempts to delay the inevitable a little more - capital engine repair. A complex of unique additives, which have been approved for this oil, provide it with better dispersion-detergent properties, and at the same time stability of viscosity and strength. Thanks to these features, engine parts receive their share of lubrication in a timely manner, thereby extending its life and increasing operating efficiency.

3 IDEMITSU 0W-20 SN/GF-5

High frost resistance
Country: Japan
Average price: 1536 rub.
Rating (2019): 4.7

This is one of the few motor oils that the manufacturer itself recommends to fill in the latest generations of Toyota Camry. High purity basic basis provides resistance to shear and oxidative processes. The oil also demonstrates low volatility and oil film strength at high temperatures, and thanks to optimal cleaning characteristics, the supply channels of the lubrication system are kept perfectly clean, which eliminates oil starvation. Among the additive components there is also organic molybdenum, which significantly slows down wear processes in the engine.

The use of IDEMITSU 0W-20 in Toyota Camry engines leads to fuel savings, and if you believe the reviews of the owners, quite noticeable. In addition, the engine works effectively in various conditions - city traffic and intense driving style do not have much impact on its wear. The lubricant works in a wide temperature range and is ideal for regions with harsh winters. The best fluidity indicators ensure pumpability of the oil in the system at temperatures close to -50 °C.

2 TOYOTA SN 5W-30

Optimal quality. Manufacturer selection
Country: USA
Average price: 2303 rub.
Rating (2019): 4.7

This oil is produced specifically for Toyota cars. If you trust the manufacturer of your car, and the nature of the operation corresponds standard conditions, feel free to pour this motor oil into your engine. Lubricants are supplied in special tin cans, which virtually eliminate the possibility of counterfeiting (an entire production facility is required to produce them). In addition to its reliability, TOYOTA oil SN 5W-30 reduces emissions of harmful substances into the atmosphere, forms a film protection on rubbing surfaces, and due to the presence of sealing impurities, increases engine compression and throttle response.

The oil manufacturer is the world's largest concern Exxon Mobil Corporation, which guarantees high quality and full product compliance latest standards API and ACEA (European Association automobile manufacturers). The advantages of using this motor oil for the Toyota Camry engine are obvious and logical.

Quality standardsAPI and viscositySAE for Toyota Camry cars different years release:

Year of issue	Gasoline engine type	API quality class	SAE viscosity grade (depending on ambient temperature)
From 2011 to present			0w-20, 5w-20, 5w-30, 10w-30
			20w-50, 15w-40, 10w-30, 5w-30
			15w-40, 1-20w-50, 5w-30
		SG and above, SF
			10w-30, 10w-40, 10w-50, 20w-40, 1-20w-50, 5w-30

1 MOBIL 1 ESP Formula 5W-30

The best motor oil. High environmental friendliness
Country: USA
Average price: 2807 rub.
Rating (2019): 4.9

Already in the name of this engine oil there is a hint of high performance lubricants that can perfectly cope with their task under extreme loads. Exxon Mobil Corporation engineers have implemented modern technologies in this product that were previously available only to exclusive racing cars. If you constantly use this oil in your Toyota Camry, you will provide the engine with reliable lubrication under any engine loads, extend the life of the catalytic converter (the oil has high level environmentally friendly “cleanliness”) and experience a noticeable reduction in fuel consumption due to the high anti-friction characteristics of the oil.

The detergent additives included in the composition, with each subsequent replacement, will consistently reduce previously formed sludge deposits, raising the internal cleanliness of the engine to a level unattainable by other lubricants. The disadvantage of this oil is its enormous popularity, which has caused a large number of counterfeits to appear on the market. Just remember this and always buy MOBIL 1 ESP Formula from reliable sellers.

The best semi-synthetic oil for Toyota Camry

Being a mixture of mineral and synthetic oils, this type of lubricant can be used in any existing engine. The mineral base makes up from 50 to 70% of the lubricant, due to which the cost of this oil is significantly lower than synthetic. Below are the best oils in this category that can be used to lubricate the Toyota Camry engine.

5 Rosneft Magnum Maxtec 5W-30

Best price offer
Country: Russia
Average price: 1000 rub.
Rating (2019): 4.3

For a Toyota Camry engine that has traveled hundreds of thousands of kilometers, in order to maintain efficiency and improve its performance (as well as optimize costs) best choice will become semi-synthetic motor lubricant Magnum Maxtec 5W-30. This oil is able to completely clean all major components from carbon deposits and other slag deposits, thanks to which some owners manage to extend the service life of the power unit. The stability of viscosity indicators in the temperature range from -25 to 40 °C allows the use of this lubricant throughout the year, and even in severe frosts, starting the engine will not cause any particular difficulties.

The presented motor oil has better resistance to burnout, which is very important for Toyota Camry cars, the engine of which has a certain wear and tear. The “eating” that has begun can be stopped by switching to Magnum Maxtec 5W-30. Also, lubricant from Rosneft can protect the cylinder-piston section of the engine from excessive soot deposits, and thereby optimize engine operation. Before use, please note that according to the API classification, this is a motor oil will do for cars manufactured before 2006.

4 BP Visco 3000 10W-40

Optimal combination of price and quality
Country: UK
Average price: 1228 rub.
Rating (2019): 4.6

For a Toyota Camry, whose age allows semi-synthetics to be poured into the engine, BP Visco 3000 engine oil will be the best alternative to original lubricants. However, you should be prepared for the fact that its effectiveness after one replacement cannot be assessed. This lubricating fluid works, as they say, “for a long time.” Changing over and over again, it gradually disperses the consequences of driving on low-quality gasoline or extended intervals between replacements.

The exclusive Clean Guard technology developed by BP and used in Visco 3000 lubricant has been successfully tested by many owners different cars, including Toyota Camry. The oil literally absorbs all the dirt it can find inside the engine. Over time (3-4 replacements, no more than 7000 km), the engine begins to work more smoothly, quieter, and its throttle response increases. The only drawback of this product is that the motor lubricant is not designed for a sporty driving style and can only be used in Toyota Camry by those owners who prefer calm and measured driving.

3 TOTAL Quartz 7000 10W-40

Durable oil film. Excellent thermal stability
Country: France
Average price: 1170 rub.
Rating (2019): 4.8

When choosing high-quality semi-synthetics for a used Toyota Camry, you should pay attention to TOTAL Quartz 7000 10W-40 motor oil, which corresponds to the most high requirements manufacturers modern cars. Despite the fact that the product is declared as an all-season product, it is not recommended for use in regions where temperatures can drop below -20 ° C, since in such conditions its viscosity decreases. Within the range of acceptable values, this oil demonstrates the best protective properties, even in relation to the most vulnerable areas of the engine. Durable, resistant to high blood pressure and temperatures, the TOTAL Quartz 7000 oil film envelops all contacting elements, thereby increasing engine dynamics and reducing fuel consumption.

A positive feature of this motor oil is its high resistance to changes in viscosity throughout the entire operating period, due to which the original properties also remain unchanged. By pouring this lubricant into a Toyota Camry, you can be sure that the car’s engine will be protected from corrosion, oxidation and premature wear. The process of soot formation will also be stopped, and the existing “trash” in the engine is gradually dissolved by oil, and as a result of the next replacement it is removed.

2 Castrol MAGNATEC 10W-40 R,

The most effective protection of friction pairs. High popularity
Country: England (made in Belgium)
Average price: 1440 rub.
Rating (2019): 4.7

Motor Castrol oil Magnatec guarantees gentle cleaning of the interior of your engine. A special set of high-molecular additives Intelligent Molecules guarantees reliable lubrication of friction pairs - even when the engine is off surface tension oil holds it on the parts and does not allow it to completely drain into the pan. Thanks to this property, which is absent in most other motor oils, the engine of your Toyota Camry is provided with an easy start even in cold weather, which, of course, significantly increases its service life.

The properties of this semi-synthetic lubricant allow you to protect the engine from overheating and avoid the appearance of sludge deposits in the engine. The oil belongs to the energy-saving class and has proven itself when working with various types of fuel. Due to its great popularity, there is a large presence of counterfeit products on the market, which requires the buyer to be more selective when searching for a seller.

Engine oil in a Toyota Camry is a self-replacement.

To perform this procedure without visiting a car service center, you simply need to follow these steps in the given order:

1. Remove the crankcase protection;
2. Unscrew the crankcase drain plug and oil filler neck. The engine must be warmed up to operating temperature. Pre-prepare a container into which the hot oil will be drained ( best option– an old oil canister with a cut out side hole);
3. Wait until all the oil has drained;
4. Replace oil filter new;
5. Twist drain hole crankcase and reinstall the protection;
6. Fill in new oil (to the level located on the oil dipstick in the middle between the MAX and MIN marks);
7. Start the engine. Check that the oil pressure has returned to normal (up to two minutes after starting the engine).

1 LIQUI MOLY Optimal 10W-40

Adapted to working conditions in Russia. Excellent quality
Country: Germany
Average price: 1749 rub.
Rating (2019): 4.8

Synthesized by modern technologies hydrocracking, this motor oil does not change its viscosity until the next timely replacement, guaranteeing reliable lubrication of the rubbing parts of a high-speed engine, including a turbocharged one. There is a low percentage of waste and efficiency when working on different fuels (gasoline or gas), there are no conditions for the appearance of deposits on internal surfaces. Motor oil has cleaning properties comparable to those of synthetic oil.

Oil forToyotaCamry (2011-2014)

TOYOTA is a brand that automotive world, symbolizes reliability and quality.

About reliability TOYOTA cars Legends are already being made.

Cars of this brand are distinguished by their reliability, quality and continuity in the model range. Each new model makes a splash at exhibitions, and old models only change their body indexes without changing their names. In the Camry model, the continuity of generations is especially visible.

For more than a quarter of a century, starting from the 10th generation, TOYOTA, maintaining continuity, has been presenting new generations of the CAMRY model. Today, the 5th generation is already presented on the market, which has received registration and is produced at the plant in Shushary in Russia.

This made it possible to make the car cheaper while maintaining high quality workmanship.

The release of the 5th generation model in Russia imposed certain requirements on the use of certain engines, taking into account the region of operation. TOYOTA Company sets to this model three engines of different sizes. This allows you to take into account the interests of buyers in terms of the price of the car and its consumer characteristics. Model range engines includes: 1AZ-FE (2.0 VVT-i, 148 hp), 2AR-FE (2.5 Dual VVT-i, 181 hp) and 2GR-FE (3.5 Dual VVT-i, 249 l .With.). These engines are reliable, economical and do not require special attention, taking into account the manufacturer's recommendations for their operation and maintenance.

Specifics service is such that it is necessary to strictly maintain a service interval of 10,000 km for changing engine oil and use high-quality engine oils of appropriate specifications. Toyota Camry engines are very sensitive to oil quality. Factory recommendations combine the mandatory energy-saving properties of the oil and strict requirements for protecting the engine from wear. An important point is the compatibility of the oil additive package with modern systems neutralization.

Especially for Toyota engines, LIQUI MOLY has almost all lines of motor oils for passenger cars There are products recommended for use. When choosing engine oil for their car, the consumer can take into account not only the recommendations of the car manufacturer, but also take into account the operating features.

In the premium Synthoil line, we recommend paying attention to the following oils: Synthoil Longtime 0W-30 and Synthoil Energy 0W-40 oils have excellent low-temperature characteristics and are very relevant in regions with very cold climates.

The Optimal line, created taking into account Russian realities, fits perfectly with a car adapted for use in Russia. HC-synthetic motor oil Optimal HT Synth 5W-30 has excellent cleaning properties, an additive package protects the engine from wear, and energy-saving technology allows for economical fuel consumption.

The Molygen New Generation branded line of oils is for the consumer who wants to get maximum drive from the car. HC-synthetic motor oil Molygen New Generation 5W-30 with a proprietary Molygen anti-friction additive package based on latest technology Molecular Friction Control allows for maximum engine protection even in the most extreme conditions.

For automatic transmission The fifth generation Camry model requires the use of a low-viscosity, high-quality fluid that meets Toyota specifications: Type WS. LIQUI MOLY takes into account the specifics of the market and offers for this model HC-synthetic gear oil for automatic transmission Top Tec ATF 1800. For the convenience of customers, this product is available in 1 liter and 5 liter packaging.

Experience shows that by using LIQUI MOLY products you can further significantly increase the reliability and service life of this model.