Every car needs maintenance. Hyundai Accent is no exception. It is necessary to change engine oil in the engine, according to the regulations, every 12-15 thousand km. Of course, you can contact a car service, but you can carry out a shift with your own hands in half an hour.

Video

The video will tell you how to properly change the oil on a car, and also talk about some of the nuances of the procedure

Replacement process

Changing Hyundai Accent oil is quite simple with your own hands. For the process to be successful, it is necessary to have minimal tools, as well as access to the vehicle from below.

When everything you need is collected, you can proceed directly to the process itself:

1. First, you need to let the car cool down.

   Remove the top cover of the engine. We unscrew the fastenings of the lower protection. We unscrew the engine protection bolts.

2. We open the hood.
3. Open the access cover to the drain neck.

   

   Find the oil filter plug.

4. Unscrewing it will pour engine oil.

   

   We unscrew the drain plug of the engine oil.

5. When the oil is drained, tighten the drain plug. To avoid smudges, it is necessary to replace the sealing ring.

   

   Drain the engine oil.

6. Before filling the oil, we replace the oil filter element.

   

   Find the oil filter housing. Unscrew the oil filter housing.

7. We pass into the underhood space. To fill in engine oil, unscrew the filler plug.

After filling in engine oil, after 5-10 km of run, you need to look at the level. Add fluid if necessary.

Oil selection

• SAE 5W-20, 5W-30;
• SAE 10W-30;
• SAE 15W-40;
• SAE 20W-50.

Perhaps the most popular viscosity for Goetz is 5W40 and 10W40. Here is an example of popular brands and viscosities for our machine.

• Aral High Tronic G SAE 5W-30
• Mobil 1FS 0W-30
• Castrol EDGE 5W-30
• Motul Expert 5W-30
• Mobil 1 ESP Formula 5W-30
• ZIC Top 5W-30
• Liqui Moly 5W-30 Top Tec
• Shell Helix Ultra 5W-30
• Castrol EDGE 0W-30
• Elf Evolution 0W-30
• Ravenol SSO 0W-30.

Remember that different viscosity grades must not be mixed and added to each other. Before changing the oil, you must completely drain the old one and use the flushing fluid!

Filter selection

Each filter should be replaced along with the engine oil change. They should be considered as one mechanism and they should also be serviced together. Recommendation for replacement every 10-15 thousand km or once a year.

Maintenance kit.

Diesel 1.5 engine (D4FA):

• JP GROUP 3518500409
• WIX WL7442
• HENGST E208H D224
• KNECHT/MAHLE OX 424D
• BOSCH F 026 407 062

Petrol 1.1 l (G4HD, G4HG) (Cost from $3 to $6):

• NIPPARTS J1310500
• BLUE PRINT ADM52107
• PURFLUX LS225
• KNECHT/MAHLE OC 521
• MEAT & DORIA 15131

Petrol 1.4 (G4EE):

• PROFIT 1540-0740
• BLUE PRINT ADS72101
• ASHIKA 10-05-599
• MFILTER TF 24
• DENCKERMANN A210100

Output

Changing the filter and oil on a Hyundai Getz is quite simple on your own. To do this, you need minimal tools, as well as minor design skills. As for the choice of filter, it should be taken seriously, because how long it will last will depend on it.

The oil volume in the Hyundai Getz engine must be regularly monitored. To some extent, this can be attributed to one of the elementary procedures for servicing a car on its own. In addition, this includes the process of changing the oil, and the choice of the consumable itself. In the latter case, the driver is required to have a minimum set of theoretical knowledge. For example, you need to know compatible viscosity and tolerance parameters, oil change intervals, top brands, and finally, how much oil should be poured into the engine of a popular car.

Replacement frequency

Engine oil in the case of Hyundai Getz, according to official figures, is replaced every 15 thousand kilometers. This regulation can be adjusted downwards due to negative phenomena. So, let's highlight the main ones:

• Operation at high speeds
• Failure to comply with the speed limit of traffic rules, abrupt maneuvers
• Driving on bad, dusty roads, in off-road conditions (muddy soil, mud, sand, etc.)
• Operation in regions with frequent temperature changes (variable climate)
• Operation in other conditions for which Hyundai Getz is not suitable.

Any of the above factors can cause the oil to quickly lose its beneficial properties. In this regard, a more frequent oil change will be required - for example, after 7 thousand kilometers. In such conditions, the regularity “the more often you change the oil, the better it will be for the reliability of the motor” is relevant. However, this applies to any transport. To prevent rapid wear of engine components, it is important to regularly check the volume and condition of the oil.

Volume and condition check

An oil dipstick is required to check the volume of the consumable. It is located in the oil filler neck. It has Min and Max marks. If the oil print is between them, then this can be considered the optimal level. Any deviation from the norm (for example, underfilling or overfilling) adversely affects the efficiency and reliability of the power unit. So, if the level is insufficient, add a little liquid. But this may not be enough if the situation is complicated by the following signs - the oil has acquired a dark brown color, contains mud deposits, and emits a specific burning smell. In such a situation, it is urgent to clean the engine of old oil, and only then pour in new fluid.

How much to fill

In the Russian market, Hyundai Getz is well known with 1.4 and 1.6 liter petrol engines. They require almost the same volume of oil, equal to 3.3 liters. The full volume can be poured in after a major cleaning of the engine from the old fluid. Partial replacement carried out at home, alas, does not provide for such a procedure. And yet, you can completely clean the engine with your own hands - for this you will have to change the oil several times every 600 kilometers. Continue until a clear liquid starts to flow out of the engine instead of the old black oil - this will mean that the cleaning is completed and you can introduce new oil in full.

The exact volumes of engine oil for Hyundai Getz engines separately for each year of manufacture:

Year of issue - 2002 - 2009
1.1l MPI 62 l. from. – 3 liters

Year of issue - 2002 - 2005
1.3l MPI 82 l. from. - 3.3 liters

Year of issue - 2005 - 2009
1.4l G4EE 97 l. from. – 3.3 liters

Year of issue - 2002 - 2005
1.6 MPI 105 HP from. - 3.3 liters.

Choosing oil for Hyundai Getz

The manufacturer recommends filling in only the original lubricant produced by the Hyundai-Kia concern. It has viscosity ratings of 5W-30 as well as ACEA A3 tolerances. The oil has been assigned a proprietary specification 05100-00441, by which you can distinguish the original from the fake.

When choosing an analogue oil, one should be guided by the above parameters. So, you can pick up the perfect product, regardless of the brand. By the way, among the most famous companies with a recognized reputation, we will name Lukoil, Rosneft, Mobile, Castrol, Kixx, Elf, Shell and others.

The content of the article:

Hyundai Getz 1, 4 Mechanics › Logbook › About Hyundai oil. I decided to change the oil, I thought to fill in which thread mobil1 5v But now I'm leaning towards Hyundai oil.

Forum Hyundai Getz Message. CLUB EXIST. LUKOIL Synthetic motor oil "Lux 5W", 4L AND DO NOT WORRY, you won't find BETTER oil .. well, for a Goetz)).

This is interesting! The Hyundai logo is not just the letter "H" in aval. It would be too easy. This emblem symbolizes the handshake of two people - a representative of the concern and a satisfied customer. In addition, translated from Korean, the word "hyundai" is translated as "modern".

Hyundai Getz Club Russia > Experience exchange > Engine > Engine repair and maintenance. Goetz driver. Posts: 57 Registration: From: nearU in Moscow. Decided to change the oil between maintenance.

Someone trusts the dealer, someone the advice of friends and experts, someone himself studies the issue in the literature and the Internet. Sent on January 29 - You need to live in such a way that they go nuts up there and say: "Come on, repeat it!!! This spring I bought oil in a box and liquid in the power steering

Changing engine oil in a Hyundai Getz 1.4 and 1.6 l

Changing the oil and oil filter in the engine. An engine oil change should be based on two factors: the vehicle's mileage and how long the engine oil has been used.

This is due to the fact that the properties of the oil deteriorate not only when the engine is running during the operation of the car, but also due to the natural aging of the oil. When operating the car in difficult conditions associated with frequent starts of a cold engine or prevailing traffic in heavy city traffic with frequent stops, the frequency of changing engine oil and oil filter should be reduced compared to that specified in the vehicle maintenance schedule.

The oil filter must be replaced with a new one at the same time as the engine oil is changed.. Every km of run or 6 months after km of run or 3 months in difficult operating conditions..

Volume - 3.75 liters including oil filter. Difficult operating conditions requiring more frequent engine oil changes include cases when:. Checking the engine oil level. Remove the dipstick from the engine and wipe it with a clean cloth. Then insert the dipstick into place, lowering it all the way, and remove it again. The oil level must be between the MAX and MIN marks.

Also visually check the oil for dirt and foreign matter. The oil level should not exceed the MAX mark on the dipstick. Excessively high oil levels lead to increased oil consumption due to burnout, clogging of spark plugs and increased formation of deposits.

When adding oil to the engine, use the same oil that was filled into the engine during the last change.. Checking the engine oil level should be carried out with the car parked on a horizontal level ground before starting the engine..

If the engine is running, stop it and wait approximately 5 minutes before checking the oil level. This pause is necessary for the oil to drain into the engine sump. Prolonged and frequent contact of exposed body parts with used engine oil can lead to various skin diseases, including dermatitis and malignant skin tumors. Therefore, excessive contact with oil should be avoided and contamination should be thoroughly washed off the skin after work.

Website design and development. After the expiration of copyright, in Russia this period is equal to 10 years, the work goes into the public domain. This circumstance allows you to freely use the work, while respecting personal non-property rights - the right of authorship, the right to a name, the right to protection from any distortion and the right to protect the reputation of the author - since these rights are protected indefinitely.

All information presented on this site is the property of the project, or other specified authors.

Oil change for Hyundai Getz

Each vehicle in the course of its operation needs an engine for a long and normal life. Timely change of engine oil helps to prevent many problems. Firstly, it prevents the appearance of carbon deposits inside the engine and the oxidation of internal parts. Secondly, which is in a normal state, it helps the engine of your car to start easily in any frost.

To change engine oil in Hyundai Getz, about 3 liters of fluid are required.

Oil change interval

In addition to the fact that you must change the engine lubricant, you must also do it on time. In order to understand how often you need a Hyundai Getz engine, just look at the maintenance schedule for your car.

So, if we analyze the Hyundai Getz maintenance schedule, we will see that the manufacturer recommends changing engine oil for the first time after buying a car after driving 3,000 kilometers. Each subsequent replacement should be carried out approximately once every 15,000 kilometers, subject to normal operation of the car. This is in the event that during this run you did not particularly subject your car to various kinds of loads. If you use the car not quite in a gentle driving mode, or just drive on bad roads and in mountainous areas, then the replacement frequency will decrease significantly. In this case, you should be between 11,000 and 12,000 kilometers.

Refueling volume of Hyundai Getz engines

The fact is that a number of engines were installed in Hyundai Getz cars by the manufacturer, these are 1.1; 1.3; 1.5 and 1.6. Due to the different displacement, each engine has its own filling volume. In the smallest engine of the 1.1 line, the filling volume is about 3 liters of oil. In the remaining motors of the line, namely 1.3 and 1.5 and 1.6, approximately 3.3 liters of lubricant are placed.

In addition, you must constantly audit and monitor the level of oil poured into the power unit. In order to check the level of lubrication on a warm engine, you need to get the dipstick under the hood of the car, which is usually yellow, wipe its lower part with a rag and put it back. Immediately after that, take it out and at the bottom you will see the level.

Choosing the Right Lubricant

In the Hyundai Getz instruction manual, the manufacturer recommends using the original factory / KIA viscosity type 10W-40 or, for regions with very cold winters, 5W-40.

If suddenly you cannot find an original lubricant of this type of viscosity, then you can choose a synthetic analogue for your car, but with a viscosity grade recommended by the manufacturer.

How to change engine oil in Hyundai Getz do it yourself

To begin with, with a key of 10, you need to remove the crankcase protection and unscrew, in addition to the drain plug, also the oil fill cap into the motor for easy draining of the lubricant.

After the mining from the pallet begins to pour out, we change the oil filter. As soon as we have drained all the waste from the pan and changed the filter, we can fill in new grease.

Do not forget that the amount of lubricant for filling into the engine is indicated in the operating instructions for your car, and you should not violate it. After completing the complete lubrication procedure, leave the machine's engine idling for 15 to 20 minutes.

As you can see, the procedure is not particularly difficult, and we can carry it out in our garage using elementary keys, which are available in almost every car.

Motor oil must be replaced every 10,000 km.
With a new car, it is necessary to change the oil after the break-in is completed (after 2500 km). When changing the oil, it is imperative to install a new oil filter (ZMZ-4062 engine) or its filter element (all engines). Oil change procedure see subsections 2.3.2, 2.3.2.2 And 2.3.3.3 .

In the crankcase it is recommended to fill in the oil of the same brand as was in the engine. If another brand of oil is poured in, you must first flush the engine lubrication system with oil of the brand that will be filled into the engine. To do this, drain the old oil, fill in new oil 2–4 mm above the “0” mark on the oil level indicator (dipstick). Start the engine and let it idle for about 10 minutes. Then drain the oil, replace the oil filter or its filter element and fill in fresh oil.

coolant must be changed every 2 years or every 60,000 km (whichever comes first). Coolant replacement procedure see subsection 2.4.4. It should be borne in mind that the coolant is poisonous, so you should not suck it in your mouth when transfusing. When working with coolant, it is recommended to wear safety glasses, do not smoke or eat. If liquid comes into contact with exposed skin, wash with soap and water.

Oil in the gearbox must be replaced every 60,000 km. Oil change procedure see subsections 3.3.2 And 3.4.2 . Every 20,000 km, check the oil level in the gearbox and top up if necessary. The oil level in the box crankcase should reach the edge of the filler hole. If the drained oil contains metal particles or is very dirty, flush the box. To do this, pour 0.9 liters of fresh oil into its crankcase. Jack up the rear of the car. Start the engine and, turning on the first gear, let it run for 2-3 minutes. Then drain the oil and refill with fresh oil. When checking the oil level, you need to clean the surface of the breather from dirt and turn its cap several times to remove dirt that has fallen under it.

Oil in the rear axle housing must be changed every 60,000 km. The oil is changed in the same way as in the gearbox. After 20,000 km of run, you need to check the oil level in the crankcase and top up if necessary. The oil level should reach the edge of the filler hole. When checking the oil level, the breather must be cleaned of dirt in the same way as was done for the gearbox.

A warning

Do not use re-drained brake fluid.

brake fluid clutch and brake actuators must be changed once every 2 years, regardless of the vehicle's mileage. Clutch and brake drives use brake fluids of domestic production "Rosa", "Rosa-3", "Tom", "Neva" or their foreign counterparts on a non-petroleum basis, the quality level of which is not lower than DOT-3. Use other brands of fluids, especially petroleum-based fluids, prohibited.

Brake fluid is hygroscopic and should not be stored in open containers.

The procedure for replacing brake fluid is as follows:

1. Remove the brake master cylinder reservoir cap.

2. Remove the rubber protective caps from the air release valves on the wheel cylinders and put rubber hoses on the valves, the ends of which are lowered into glass vessels.

3. Turn off valves no more than on one turn and, pressing a brake pedal against the stop, merge a liquid. Close the air release valves as fluid stops flowing from the hoses.

4. Pour out the drained brake fluid from the vessels and put them back in place.

5. Pour fresh fluid into the master cylinder reservoir, unscrew all air release valves one turn and, pressing the brake pedal to the stop, fill the brake system. In this case, you must constantly add fluid to the reservoir of the master cylinder. After clean brake fluid begins to flow out of the hoses on the air release valves, tighten the valves.

6. Bleed the brake system to remove air from it ( see subsection 6.9).

7. Close the brake master cylinder reservoir with a stopper. Remove the hoses from the air release valves and put on the protective caps.

In the same way, replace the fluid in the clutch hydraulic drive.