To begin with, I would like to say that excessive enthusiasm for tuning any car can be dangerous for the eyes of others. Chevrolet Lanos is a car with a rather ordinary appearance of the 98 model. The machine is not equipped with the most the best motor of the same times, but the car was created with the participation of Italdesign, which is not bad at all. Exist different ways transformation of this classic sedan. you can buy ready-made kits, carefully selected for tuning Chevrolet Lanos with your own hands.

Tuning kits and individual parts

The stores sell special tuning kits for the Chevrolet Lanos. They are very popular, but the purchase of one or more is also in high demand. individual elements body kit. For example, you can install a spoiler that will significantly change the exterior of the car. This detail external tuning is the most effective. Initially, this element appeared in the world of motorsport, and it was invented in order to increase downforce, which contributes to better grip of the wheels on the road surface. Over time, the spoiler has ceased to be just a useful element, but has turned into a way to highlight the car. At the same time, some spoiler models have completely lost the ability to create a competent aerodynamic effect. Sometimes, instead of downforce, attractive spoilers create a lifting force, providing braking power to the car.

Spoilers with the outline of an inverted wing of an airplane in cross section have good characteristics. Rear spoilers are usually installed on the trunk lid or in the upper part of the fifth door near the rear window in the case of a hatchback body. Sports spoilers from the famous game Need for speed are very popular today. Sports spoilers are designed in high-tech style and have technocratic elements: brushed or polished aluminum, nickel-plated fasteners at connection and adjustment points. At the same time, the spoiler has a simple functional form. Installed on a car, such a spoiler improves the aerodynamic characteristics of the car and gives favorable visual properties to the car.

When buying a spoiler, special attention must be paid to attaching it to the trunk or the fifth door. If the mounting is poor, the downforce that will act on the spoiler while driving can cause deformation of the trunk lid.

Spoilers in the form of visors are sometimes installed at the point of convergence of the air ceilings between the trailing edge of the roof and the trunk lid. In this case, this tuning element does not look so attractive. Such deflectors are installed on hatchback and sedan cars at the junction between the fifth door and the roof.

How spoilers work

The deflector captures air flows passing over the machine and changes its direction to rear glass Chevrolet Lanos. Consequently, the glass remains always clean, but handling deteriorates due to the increase in lift. Rear deflectors are justified on SUVs and minibuses.

ABS spoiler

The material used to create spoilers is also important. Spoilers sold in modern stores are made from high-tech ABS plastic. The main parameter by which it is customary to determine the quality of the spoiler is the wall thickness. The rigidity of the product must be such that it can sag equally over the entire surface under some load.

Fiberglass spoiler for Chevrolet Lanos

To the touch, a good spoiler should not have any swelling and soft spots in the corners. Another common material used to make spoilers for Chevrolet Lanos is fiberglass. This material lends itself well to processing and does not require special equipment from manufacturers. As a result, almost all non-original body kits are made of fiberglass.

The surface of these products may be slightly uneven. Which will show up even more over time. When sending such a part for painting, it should be ensured that the spoiler edge is carefully processed, puttied and painted.

These tuning details play a rather decorative role, but they also affect the aerodynamics of the car. They also provide good protection from damage to the body by stones flying from under the wheels. Minor impacts, such as the door of a nearby car in a parking lot, can also be absorbed by the thresholds. These elements also hide traces of minor accidents. At the same time, the metal treated with anti-corrosion agents is hidden under new thresholds, and you save money on body repairs.

Specialized stores offer Chevrolet Lanos owners high-quality tuning thresholds in painted and unpainted form. Products can be painted in the color of the car at the factory, and they cost less than if you buy regular thresholds and give them to a painting service. When buying thresholds, it is better to give preference to models made of ABS plastic than parts made of fragile plexiglass. The quality of these parts can also vary, so you should beware of fakes with soft corners and kinks.

Radiator grilles, referred to by car tuners as masks, are the most memorable part of a car. Tuning grilles Chevrolet Lanos can be performed separately or in combination with the entire body kit. When buying, it does not matter what material the mask is made of: the part does not soften blows and is not subjected to mechanical stress. The lattice must have regular and neat geometric shapes, and also have a clear axis of symmetry. The paint retention and chip resistance properties are higher for ABS plastic as it has better adhesion.

Tuning bumpers Chevrolet Lanos

The bumpers of these sedans are not just a great tool passive safety, which dampens light impacts, but also act as a design element. Each minor restyling involves a change in the appearance of the bumpers, especially in the front. Upgraded bumpers on the Chevrolet Lanos can significantly update the exterior of the car, and in combination with other body kit elements, they create a unique look - more dynamic and relevant.

tuning Chevrolet Lanos is gaining more and more popularity not only among our compatriots, but also among the owners of this model in far abroad countries. Lanos is positioned as budget runabout for comfortable ride in the city. With the help of engine chip tuning and do-it-yourself body upgrades, Chevrolet will gain power and original appearance.

1 Flashing the Lanos engine ECU

Before you start finalizing Chevrolet elements, you should work on the car's engine control unit. Chip tuning will be the best way to increase the power of the car at minimal financial cost. To perform the work, you will need to stock up on licensed software and original wires. In the case of using pirated utilities, chip tuning will not only not improve the performance of your car, but will also significantly harm the operation of the ECU. So, we need:

1. Loader Combiloader;
2. Latest firmware version for ECU Lanos;
3. K-Line adapter;
4. Laptop with Windows XP.

It should be noted right away that the laptop on the other operating system categorically not suitable for chip tuning, since Windows 7 or Windows 8 are not able to “see” the adapter connected to the laptop. Find latest version firmware that is suitable specifically for your ECU is not difficult. To do this, go to the official website of the control unit manufacturer, enter the name of your firmware version and wait for the results.

After the system shows you a list of utilities available for download, select and save to the laptop the one whose digital designation is higher. For example, between firmware January 5.1 and January 7.1, you need to select the second option. For you need to find the Chevrolet Lanos ECU. It is located under the steering wheel in the car. Remove the protective cover and connect our K-Line adapter to the block. We connect the second part of the adapter to the bootloader, which must be connected to the laptop. Next, turn on the ignition of the car and wait for the data on the control unit to appear on the laptop.

After that, open the previously saved firmware and select the final path for it in the ECU folder. The firmware will “request” the calibration of the parameters. Here you should make settings for each available part of the car so that in the end the operation of all machine systems meets your specific requirements. After you have calibrated the parameters, you can start chip tuning. To do this, we agree to the terms of use of the firmware and wait for the moment when the running line of the download turns green. After we see a notice of a job well done, press “OK” and turn off the ignition. In the end, it remains to disconnect the computer from the adapter, and the programmer from the laptop.

After the done chip tuning, you can test the car. Provided that you have used licensed utilities, you will experience cardinal changes in its operation from the first engine revolutions. The Lanos motor will run quieter, more stable, it will not twitch when switching gears and will start using much less fuel. After doing chip tuning with your own hands, your Chevrolet gets an additional 20-30 hp. s, and fuel consumption is reduced by 1-1.2 liters.

2 Noise isolation and gear lever for Chevrolet

Given the standard Lanos equipment, the car can be classified as an economy class. This also confirms the interior of the model, which does not differ in particular interior decoration. As for the quality of the cabin elements, everything here is done to a minimum: a minimum of lighting dashboard, minimum comfort for rear passengers. After all, even the gear knob is made of plastic, which isn't that hard to break.

The conclusion suggests itself - interior improvement is simply necessary. And the first thing we will start with is the installation of soundproofing material. To do this, you can use either the well-known to us, or the material that the Chevrolet company has already released in pursuit of Lanos. The second differs from felt in better soundproofing qualities, lower cost and practicality in use. So, to clean the material from Chevrolet, you do not need to unscrew a lot of fasteners.

It is enough to pull it out entirely, clean it, treat it with a special paste that is included in the kit, and install it back into place in the cabin. The next step in tuning the Lanos cabin will be the replacement of the gear lever. To do this, you can purchase metal parts from companies Bosch or products model range firms Pirelli. To replace the lever, you will need to dismantle the old part. First, unscrew the 2 bolts holding the standard handle, and pull it out. Instead, we insert new element and fasten it with fasteners.

After these procedures, driving a Chevrolet Lanos will become more convenient. Now you do not have to worry every time about how hard to push the gearshift lever, and what hole in the cabin to plug in order to listen to your favorite song.

3 Install LED or neon lamps

In addition to chip tuning and interior modernization, do not forget about the exterior of the car. The body of the car is made in full compliance with the standards of the Lanos family. The oval headlights of the car are not able to provide good visibility on the road, which is why drivers are forced to modify the car's optics with their own hands. To do this, you can use LED or neon lamps, which can be placed on the sides or behind the standard headlights. In addition to additional lamps, we will also need glue and double-sided tape.

Before modifying the Chevrolet headlights, you will need to remove its front bumper. To do this, you need to snap off the latches and unscrew the 4 fasteners from the bottom of the part. Next, we take out the protective glass of the factory optics and the devices themselves. After that, it is worth cleaning the space where the optics are located, as well as washing the protective glass. Then we use double-sided tape, we attach neon or LED lamps to it, the edges of which we fix with glue. After you have made sure that additional lighting devices are stationary, you can install regular headlights. At the end, it remains to attach the bumper and continue to operate the Chevrolet Lanos.

After a do-it-yourself improvement of the interior and exterior, your car will gain absolutely new life. It will not only become much more powerful and comfortable, but will also serve you much longer.

Cars of the world-famous Chevrolet concern are quite popular not only among our compatriots, but also among those who live in far abroad countries. Tuning does its best to give this car a special chic.

Polish tuning studios specialize in ensuring that a car of this brand has not only a special appearance, but also individual specifications.

Special attention to all spare parts and details. You will not find non-patented or certified products in any workshop, therefore, employees are responsible for the quality of all work carried out to finalize machines.

If you find yourself on the territory of a friendly state, you can safely contact Auto-Partner or Grzybek Drealer Service. Each car owner can easily choose the right option for his iron horse.

If you believe the statistics, then it is traditional to install specific overlays on the headlight or bumper, even the rear wings or sills are ready to boast of a new look.

At your request, workshop workers will not only improve the appearance of the car, but also improve the technical characteristics. So from an ordinary Chevrolet sedan can be transformed into sport car. Don't believe?

Watch the video:

Do you want to make your car interior unique? Start with the standard panel where the appliances are located. As soon as you replace it with the original model, then 50% of the changes, consider that you have done.

And if you stick special decorative inserts into the salon, then in such a car it’s not a shame to ask for a hand from your beloved girl. will give a lot of advice if you want to replace the steering wheel or seats with your own hands. Cover the latter with leather: you can assume that the first beauties of your city will challenge the championship in the offer to ride them.

This is how the fairy tale begins: from Cinderella your car turns into a princess. Domestic car repair shops also do not stand still: installation of additional equipment is at your service: electric mirrors, similar power windows, alarms, body straightening, up to its change. There was a car like a car, but it became an open convertible.

It is a pity that the latter service is not yet popular with customers. The power of your "girlfriend" can be increased by screwing in other spark plugs, changing exhaust system or put a special sports air filter. For those who cannot live without high speeds, you can also improve the motor: teach the car to make a jerk of 100 km after seven seconds of operation.

Do-it-yourself tuning Chevrolet Lanos: a selection of photos

If you can't wait to change something in your Chevrolet Lanos, then try 3D tuning on the site: this program will allow you to track not only the mistakes that you could make when blindly modifying a car, but also add something new, it's not a secret that this particular machine is not particularly distinguished by design.

The development carried out at the plant back in 1998 is somewhat outdated, and the engine needs it. External tuning can be carried out in several directions at once. Look at the photo: how do you like these variations of reincarnation? There were low-quality and unpopular vehicles - they became handsome!

Would you like to add multiple elements to ? The new spoiler will radically change the characteristics of the car only for the better. It is considered one of the spectacular details of external tuning. It does not matter that originally this invention served to increase the quality of tire adhesion to the road surface.

Now it refers to a unique refinement, which improves the aerodynamic capabilities of the machine. Beautiful spoilers create a lifting force, thereby contributing to the braking process of cars. Mechanics unanimously argue that the best parts are those that resemble an inverted wing at 16 degrees in cross section. It can be less, up to 9o. This part is installed on the roof, and for hatchbacks - on the 5th door, above the glass.

The last few years have been popular, which are conditionally called sports because of the computer game Need For Speed ​​(high-tech street racing). These parts use not only polished aluminum, but also nickel fasteners.

Despite the chic look, it is quite simple and multifunctional. Those who like to call such a change " collective farm tuning» Chevrolets are simply deluded. It is this one, specially installed on the car, that improves the appearance and aerodynamic properties.

It is not necessary to do this all over, separate sections will suffice. If you also choose the color to your liking, then the interior will change beyond recognition; if desired, a flocking operation can also be performed, which includes coating the interior parts with a special coating similar to velvet.

This treatment option will help get rid of cracks on the instrument panel or eliminate other interior defects; replace standard audio system, repaint the elements of the dashboard and on the dashboard, install special lining on the pedals. Such an improvement depends on the imagination of the Chevrolet owner and his material capabilities.

Chevrolet Lanos engine tuning

How many kilometers have you driven in your car? Well done, but still the engine power is noticeably lacking. To add some playfulness to it, it is worth going to all sorts of tricks and even improvements. Start with the intake and exhaust system. The words are terrible, but in reality - this is a completely harmless species, including a whole range of measures associated with the alteration of components and assemblies. However, the cost of such work and for $ 3,000 can go away.

Are you ready for the engine resource to drop to 10,000 km? If yes, then you give him a short life span. Practically, this is one season without additional repairs. If you carry out an appropriate refinement through the given km of run, then the service life will be extended for the same time. Here's just one more problem: it is not easy to drive through the everyday bustle of the streets and standing in traffic jams on an actively charged engine: the engine will constantly refuse to work stably both at low and medium speeds.

It's all because of the overhead camshafts, sporty intake/exhaust system and ceramic clutches. To avoid trouble, it is better to increase the feed fuel-air mixture directly into the combustion chamber of the engine. This will lead to an increase in the mass of burning fuel and the power of the Chevrolet engine.

If you add the required amount of gasoline, then the problems will disappear by increasing the jets in the engine (carburetor) or by changing the injector control program. The second indicator is called chip tuning. So you can add the required amount of air. But there are other ways: using filters zero resistance, oversized valves, camshaft tuning. This also includes a turbine, compressor and supercharger.

It is worth talking about superchargers and compressors in detail: this is quite effective method saturate the engine with air. It is not cheap: compressors and superchargers belong to the class of complex high-tech devices that can be operated for a long time, even at high loads. In extreme conditions, they are ready to continuously supply the engine with the required amount of air mass. How much power will you remove from the engine if you install a compressor without reducing the resource of the power unit? The analysis will be phased:

Can a compressor or supercharger be installed on the car of the specified brand?

Not only on Chevrolet, but on any brand vehicle, where designers have provided a wide engine compartment, you can put a certain type of compressor. There is a certain code: for Mercedes, they put products from KLEEMANN or EATON. BMW can be equipped with VORTEC.

What power increase should be expected?

depends on the compressor setting or the needs of the owner. But certain norms, rules should not be violated: an increase in power by no more than 45%, torque - up to 50. If the engine displacement is over 2.5 liters, then the power will increase by 25-30%.

Does a standard Chevrolet engine handle a certain degree of boost?

Yes, it is 0.5-0.6 bar. Enough to add a tangible 45%.

Can I buy ready-made kits for installing the compressor?

Manufacturers produce compressor kits (KIT). The market is dominated by the Americans, but this does not mean that their products are of poor quality. They manufacture additional parts for an existing compressor: fasteners, rollers, pipes and much more, which is required to install the entire package on a Chevrolet.

Its cost ranges from $4,500 to $5,000. The compressor itself is $2000. The price can be even lower: it depends on the type of element and the promotion of the manufacturer. Russian firms increase the cost through delivery, customs clearance and wages of employees. As a result, a super-sum comes out, which can empty the money-box of any car owner.

How long does it take to install and configure the unit with your own hands?

From 10 days to 2 weeks, if the work is carried out constantly. If you are confident in your abilities, and adrenaline is only to help, you can even cope with the turbine. For beginner car mechanics - video:

Chevrolet Lanos dashboard tuning

The idea to replace the backlight on the dashboard occurs in the head of every car owner. It is undesirable for Chevrolet to change regular inserts, even if you listened to the advice on using the services of a local printing house or phototypesetting machines. There is another way: find a craftsman who can make a board with LEDs, modify it with inside cover with scales, buy white ones for 7 cd to replace regular lamps.

How to do blue backlight VDO panels?

Take 6 blue LEDs, the same number of 850 ohm resistors. The first one can also be purchased in 3 mm, if it turns out to be brighter than the others, but with a ground bulb, so as not to pour glue on top (so the light is at least even). In addition, buy 5 more white, superbright, 5mm. Grind off the lens on the top 2, and make an inner cone with a drill, fill it with Moment gel glue.

Insert into lamp sockets, secure in the instrument panel. Go to the market for 20 cm of Taiwanese film, preferably blue. Needed for stickers windshield car. Remove the panel, visor, be sure to write down the position of the arrows. Peel off the standard insert from the light guide using a clerical knife.

Bend the standard insert (do not touch the arrows), use a clerical knife to erase the green light filter behind absolutely all numbers and sectors. Check glow. Raise the insert a little (be careful, arrows!), carefully place the previously cut blue pieces of film behind the white sectors of the scales with tweezers. They lay down on their own. Once again, make sure that the backlight is working and you can start assembling.

Chip tuning Chevrolet Lanos

Consider it on the example of one car owner. Somehow he got tired of his failures, when his beloved iron horse started moving. There was a desire to immediately buy and change, but the Internet helped. found craftsman, who offered his firmware services right in his garage. The process turned out to be simple: to begin with, he tucked his brain into the computer to make sure everything was normal.

If you changed the filters, drowned out the EGR, thermos at 92, BB wires, new spark plugs, then chip tuning is a pleasure; the firmware itself took 3 minutes; the master closed the hood, received a payment, left a business card, gave instructions: it is strictly forbidden to refuel at Rosneft because of low-quality gasoline, which is why the car eats it 2 times more than similar fuel at other gas stations; lifetime warranty for chip tuning, if the owner runs in 50 km.

Feelings are great! The ass meter in the garage area was silent, but in the city traffic the changes are obvious: you start off from a traffic light with the air conditioner on, but there are no failures, nothing is dull.

There are also miracles on the track: the maximum torque went to the region of 2500 rpm, while before that the speed of the cruiser did not go beyond 100. Now it is over 140 km / h, but more - with effort, but the dynamics in 4th or 5th gear has increased, so sticking 3 to overtake is no longer required. It is a pity that Lanos still has jerks, but this is like a kind of car feature.

But we were lucky with the speed: now it accelerates to 190 with ease, whereas before it did not go above 140. If you hear that after 160 km / h it starts to howl, then do not worry: aerodynamics are not designed for such indicators. However, fly swatters and wind deflectors are quite capable of making such sounds. Service centres they also do not lag behind: the last video about this:

In contact with

Classmates

Found an error? Select the text with the mouse and press Ctrl+Enter

For several years now you have been the owner of a Chevrolet Lanos car. Everything about it suits you. The car is reliable and unpretentious. Nevertheless, at times there is a feeling that something is wrong in the car. In fact, this is a signal that the car has become boring to you. It's time to buy another one or make an iron comrade tuning.

"Chevrolet Lanos" - what can be changed

The owner can change absolutely everything in his car! That's why he's the owner. It all depends on financial capabilities and reasonable expediency. For most car owners, sometimes it is enough to change seat covers and floor mats to experience a sense of novelty, hopelessly confused during the operation of their car. But the effect will be short-lived, and you will again show discontent. There is only one way to avoid this - to make Lanos tuning. Can do power plant, transmission, interior, optics. Install optional equipment to increase ride comfort. Or a more advanced audio system with an amplifier and a subwoofer. Let's try to consider in more detail below the possible directions in which the Lanos tuning will go.

Engine

A more torquey engine will not interfere with your car, but will only add dynamism on trips. You can limit yourself to a small adjustment and do chip tuning "Lanos" from a specialized master. The effect of this procedure is present, but significant changes should not be expected from it.

You can increase engine power by 20-30% by installing a turbocharger. For ease of construction, an electrical installation can be used. This will make it easier to convert your naturally aspirated engine to a turbocharged one. Forcing the engine with the replacement of the piston group and camshaft will be more expensive. After such changes, it will be necessary to remake the exhaust system.

Transmission

The owners of "Lanos" are familiar with this: moving along the highway in fifth gear, sometimes you want to switch to sixth, which is not there. If you have modified the engine, you will simply need to do something with the gearbox.

Leaving the box body intact, it is necessary to replace the gears with others, in which the gear ratio differs from the standard one. For better control behind the box, the standard backstage should also be replaced with a short-stroke one.

Salon

The most popular direction where you can do a variety of tuning "Lanos" with your own hands.

You may not know that the front seats of your car can be very easily replaced with more comfortable ones. The seats of the "Chevrolet Lacetti" with their fastenings completely repeat the knots in the seats of the "Lanos". To install them, you just need to unscrew the 8 bolts that secure the guide skids, remove yours and install new ones from the specified car model. You are provided with a more comfortable fit a little higher than before. The seats themselves are somewhat wider and look more aesthetically pleasing.

To complete the picture, you can also replace the rear sofa. In this direction, tuning "Lanos" will be associated with minor welding work - it will be necessary to weld new ears under the fastening of the lower part of the seat.

You will also have to cut off the bracket holding the seat backs down - it must be replaced with a bracket from the Lacetti. The ears that the seats in the upper part cling to will need to be moved a little. That's it, you have a new salon. The rear sofa is a few centimeters wider than the standard one, but this is not critical. The doors close, and it will be more comfortable for rear passengers to endure the trip, especially if in the back rear seat a reclining armrest was installed - a thing that is a priori impossible in Lanos.

Tuning salon "Lanos" does not end only with the replacement of seats. Can be covered with vinyl leather plastic parts door cards, central shaft and dashboard. If manual windows are installed, start by replacing them with electric ones. If financial opportunities allow, change the rear ones too - passengers will appreciate it.

Optics

Factory optics leave much to be desired. The solution is simple - install xenon lamps. You can put xenon in the fog lights, and in the main ones. In the latter, we recommend installing bi-xenon lamps. And then high beam will be even more powerful. The main thing is to correctly adjust the lighting devices so that the xenon light does not cause inconvenience to the oncoming traffic flow. It is possible to install xenon with lenses, but this requires technical intervention in the design of the headlight.

Nevertheless, such tuning "Chevrolet Lanos" would be preferable. Neon lights around the lens looks very attractive.

It is also possible to replace all lamps in external light signals with LED elements. Today, the market is saturated with such lamps that are installed in regular places without alterations. Such tuning "Lanos" with their own hands can be done by any owner.

Styling

Changing the appearance of the car is designed to attract the attention of the inhabitants. Nothing pleases a person so much as the envy of others.

There is a lot of room for creativity here. The first thing owners prefer to change is bumpers.

Boring and dull factory bumpers, having undergone tuning, can radically change the appearance of the car. The next step may be to change the geometry of the hood, the front decorative grille. All sorts of moldings and door sills can radically change the appearance of the car. Installing a spoiler on the trunk will give the car a more aggressive sporty look.

As you can see, tuning "Deo Lanos" can take a variety of forms. The main thing is that the owner is satisfied with his initiative.

Chevrolet cars are very popular with both Russian and non-CIS buyers. Tuning Chevrolet Lanos is designed to make the car truly special, to give it a unique chic. Tuning services improve not only the appearance of the car, but also its individual technical characteristics.

Tuning Chevrolet Lanos

Tuning enthusiasts highly appreciated. This is related to both low cost this foreign car, and with a relatively simple design. However, the main advantage here is the relatively simple and unobtrusive appearance of the car, which allows you to make an absolutely unique car without any special effort.

To do this, there are 2 options: either contact the specialists in the workshop, or purchase spare parts for tuning and do everything necessary work on one's own. Regardless of which path you choose, the goal of tuning will still be the same - to create a car that will be different from all other cars of the same brand and in which a piece of the soul of its owner will be embedded. Only when the owner and the car are perceived as one, the goal of tuning can be considered achieved.

Each car owner can easily choose for his Chevrolet Lanos tuning parts. According to statistics, the traditional types of tuning include the installation of additional pads on the bumper and headlights and the installation of thresholds.

Appearance Chevrolet Lanos can be changed for the better if you install an aerodynamic body kit on the car. The set of body elements is ABS plastic. This kit includes:

• rear and front bumper
• side skirts
• hood linings
• rapids
• radiator grille
• spoilers
• fog lights
• eyelashes on headlights
• moldings

These details will not make the car heavier, on the contrary, they will make it lighter and more elegant. Each element aerodynamic body kit It is installed on regular parts of the car and does not require any additional holes in the body.

Interior tuning Chevrolet Lanos

Chevrolet Lanos is classified as an economy class car. However, its technical characteristics in general are quite good. This is what has become main reason such a high popularity of the Lanos car.

One of the main disadvantages of this vehicle is the too low level of sound insulation. Therefore, one of the most urgent is the problem of noise reduction. If for some reason you can't take your car to the experts, you can try to solve this problem yourself.

To do this, the first step is to disassemble the interior and luggage compartment. Such work must be carried out as carefully and accurately as possible. First you need to remove the seats, then dismantle the ceiling and disassemble the trunk. After that, light bitumen is applied, and the second layer is soundproofing material. Additionally, the interior can be processed special material- carbon. Noise isolation does not have to be made continuous, separate sections of the cabin will suffice.

To change the interior of your Chevrolet Lanos beyond recognition, you need to choose a certain color of materials. It is possible to carry out work on coating some interior parts with a special coating, which is most similar to velvet. This will make it possible to get rid of cracks on the control panel, as well as eliminate other defects that may be present in the cabin.

As an interior tuning, you can replace the standard audio system with a more advanced one. Dashboard tuning will also add zest to the car. Almost all car owners change the backlight of the dashboard. However, manufacturers do not recommend replacing standard inserts on Chevrolet cars. Examples of finished salons can be viewed at photo tuning Chevrolet Lanos.

Engine tuning

Any engine modern car carries out its work under the control electronic block ECU according to a special algorithm. Chip tuning is a thoughtful change in the ECU program, which is aimed at increasing the power and torque of the engine. Besides, this species tuning improves the fuel efficiency of the car.

In general, we can say that there are a lot of positive aspects from chip tuning, and the main thing is to improve the dynamics of the car. The increase in engine power of a Chevrolet Lanos car during reprogramming is 5-8%.