How to install and configure an on-board computer on a VAZ 2115 car?

Work car engine, as you know, depends on the health and condition of many mechanisms and sensors. And to ensure that they work in sync, which allows the engine to run at its most optimal performance, keep an eye on the on-board computer (BK). What is a BC, what is its purpose and how to install an onboard computer on the VAZ 2115. The answers to these questions will be found below.

Characteristics of BC

Almost all modern cars mobiles equipped with these devices. As a result of the significant advantages that the BC installation provides, many domestic motorists resort to installing this device, whose cars are not equipped with computers.

business meeting, meeting

Regular BC "Pyatnashka" is used for:

• issuance of information about the operation and status of the main units on the dashboard;
• transmission of data on the operation of certain nodes in real time;
• obtaining information about route parameters;
• if necessary, with this device you can check the status power unit followed by the output of combinations of errors present in his work.

basic settings

Briefly about the main parameters of the computer:

1. The device shows the speed at which the car is moving. Also with its help you can determine the rest of the fuel in the tank and the travel time at a certain interval.
2. BC shows the number of engine revolutions.
3. Thanks to this device driver, you can always find out about the state of the temperature in the cabin, as well as the temperature of the engine.
4. The device determines the fuel consumption in a certain area, the kilometers traveled and the number of kilometers that the car can transfer to the remaining fuel.
5. In addition, the device allows you to determine the level of voltage present in onboard network vehicle.
6. As mentioned above, with the help of aircraft personnel, it is possible to determine possible faults present in the power supply.
7. Another parameter determined by the computer is the cycling of the airflow circulation.
8. Average vehicle speed.
9. Data on the time when the next TO of the machine is required.
10. Information about the need to change certain parameters in the operation of various auto nodes.
11. Depending on the model and the data stored in its memory, the device can calculate the time when the next time the car owner will pay for insurance.
12. Various information from the organizer.

Possible malfunctions

First, consider the signs of the collapse of BC:

1. There are no signals about the operation of the ignition system, injection or other actuators.
2. Response to the operation of the oxygen controller, DUT, sensor throttle valve etc. is missing.
3. Communication with diagnostic equipment missing.
4. The presence of physical damage. burnout of radioactive elements, damage to conductors or cases, etc. (Video author. Pavel Myalik).

Staff on-board computer 2114

Staff overview on-board computer VAZ 2113. 2115 Trip computer indication values ​​How to reset

regular airborne Computer 2114 Setup and HOW TO TURN OFF THE BEEP (buzzer)

regular On-board computer 2114 Setting and HOW TO DISABLE Beep (buzzer) Overview and setting of regular on-board.

As for the reasons, there can be many:

1. Incorrect operation or presence of malfunctions in the operation of the high-voltage component of the ignition system. The problem may be in the operation of the reel, high voltage cables or the spreader.
2. Moisture on the control box.
3. Incorrect "lighting" of a car with a worn out battery. from a car with a running engine.
4. Acceptance of errors when repairing an electrical part or when installing an anti-theft system.
5. Another reason why the BC could break is. this is the interlacing of polarity when connecting the battery, that is, plus is connected to negative, and minus is plus.
6. Turning on the starter assembly with the power rail disconnected.
7. If body welding work has been done, the cause may be an electrode that has fallen on the vehicle's wiring or sensors.

Errors and their decoding

The main designations of errors:

• 2. the mains voltage is too high;
• 3. there were problems with the operation of the fuel indicator;
• 4. there was a violation of the temperature regime of the engine;
• 6. the engine is overheated, the car must be stopped;
• 7. Level engine oil too low in the lubrication system;
• 8. in brake system There has been a breakdown;
• 9. the battery is low.

Connecting Yourself Guide

Brief instructions for installing and connecting the on-board computer:

1. First of all, it is necessary to disconnect the electrical network of the car, this is necessary, because otherwise a short circuit may occur during the connection. To turn off the power, disconnect the battery.
2. Dismantle the car radio first and then. center console. For the console, you will see a place to install the BC, it is provided by the manufacturer. All the necessary wiring brought to this place.
3. Then remove the cap. after that you will be able to see the wiring harness as well as the connector. You need to connect all necessary plugs to BC. In particular, we are talking about the power cable from the on-board network, the power source when the ignition is activated to start the BC, the power from the general lighting, ground, and also the fuel level controller. You must also connect the diagnostic line, if you do not, the device will not be able to diagnose errors and display them on the display. In addition, after connection, the device must be securely fixed. This is also important, because if the aircraft is not properly fastened, it will be subject to vibrations that occur during movement, and this, in turn, can lead to its breakdown.
4. Reinstall the center console using the radio. This completes the installation procedure. Now you only need to set up the BC according to the operating instructions and test it (the author of the video is the flasher channel).

Dismantling

The device is dismantled according to a similar principle:

1. Firstly, to de-energize the on-board network, it is necessary to disconnect the terminals from the battery.
2. Then the center console is dismantled along with the audio system.
3. Through the window that appears, you will need to disconnect the power wires from the computer.
4. The device is then dismantled and the center console with the car stereo is put back in place.

As for specific settings, this procedure will differ depending on the type and model of BC. Modern automotive market offers consumers different types BK, differing in price and functionality, as well as the manufacturer. Accordingly, because of this, the principle of installing the device may be different. To properly set up the computer, you must carefully study the instruction manual, it will indicate all the main points of this process.

airborne car computer or the "brains" of the car - this is the most important element of controlling and monitoring the performance of all the main components of the vehicle. BC is put today on all modern cars. You can learn more about the principle of operation and varieties from this material.

[ Hide ]

Description of the on-board computer

What is an on-board computer in a car and what tasks does it perform? First, let's look at some theoretical points. BC is an electronic unit that allows you to respond and control various processes in the operation of various auto systems. That is, thanks to the BC, the driver will always be able to receive data on the operation of certain components. We figured out what an on-board computer is, now we’ll talk about its purpose.

What the on-board computer shows:

• the device demonstrates the consumption of gasoline in different driving modes;
• allows you to control the nozzles, as well as the ignition system of the vehicle;
• controls the operation of the transmission;
• can manage various additional systems two-way communication, for example, a rear-view camera, etc.;
• allows you to determine the level of pressure of the motor fluid, the temperature of the antifreeze;
• regulates the voltage level in the electrical circuit of the car, controls the battery charge;
• if the vehicle is equipped with a climate control system, then the BC controls it as well;
• one of the main options - the on-board computer for a car allows, if necessary, to read error codes and show them on the display so that the driver can decipher them and find out where to look for a breakdown.

Principle of operation

The principle of operation of an automobile BC for carburetor engines or injection options are not particularly complicated. The device connects to a chain of controllers and regulators, reads the necessary data, and then processes the information received. Special software is used for processing. For example, if the BC receives data on fuel consumption according to the scheme, then the software will allow you to calculate possible mileage on the remaining volume of gasoline.

All data is displayed on a screen installed in the vehicle interior. The display itself can be digital, monochrome, color, or four or three digits. As practice shows, a 2-inch monochrome screen is enough to show the driver more than ten parameters. More modern versions of the BC today are equipped with a high-precision liquid crystal display.

Kinds

To date, there are several types of BC:

1. universal option, such a device combines various options and gives the car owner the opportunity not only to drive the car, but also to surf the Internet. The main purpose of such a device is to increase the comfort for the car owner while driving. Typically, a universal on-board computer has a screen with a diagonal of 6-14 inches; a keyboard can be connected to newer models. It should be noted that in their design such BCs are very similar to ordinary computer PCs, but one of the features of the devices is a low degree of integration with the car's electrical system.
2. Route. The trip on-board computer allows you to determine the driving parameters of the car, while it is not necessary to connect it via GPS to the satellite. However, newer models are equipped with GPS receivers anyway. With the help of such a device, the driver will be able to determine the average speed of the car, fuel consumption, the remaining distance to a particular point, the distance traveled, etc. In addition, depending on the model that you install in your car, the device may have the function of calculating fuel consumption when emergency braking or fast acceleration. Typically, BC of this type are installed in the control panel.
3. Manager and service BC. The purpose of such computers is to determine the breakdowns of the main units of the vehicle and warn the car owner about this. As a rule, such a BC is an integral part of the machine control system, but depending on the model, it can also be an independent device with extensive functionality. When checking a car, all combinations of errors are stored in the device’s memory and will remain there until the error is corrected and the memory is reset (the author of the video is the AvtoGSM channel).

Bookmaker setup

Making an on-board computer with your own hands is a difficult task at home. To make a device, you will need many different elements, including a display, a microcircuit, buttons, etc. It is impossible to make a computer on your own without the experience of assembling such devices, so if you want the device to work correctly, then it is better to order this procedure or buy a new BC.

If you decide to install an on-board computer for carburetor or injection engines, then you need to know how the device is configured correctly:

1. If necessary, you can always activate the automatic configuration option - then the device itself will take the necessary configuration.
2. If this option does not suit you, then go to the settings menu - find desired block and select it. It should be noted that in this case, the BC must be configured as the main device. One of the important roles in the setting is determined by the choice of mode, due to which the fixing of fuel costs will be carried out.
3. By setting this parameter, you have several options. One of them is a linear relationship, in which case the parameter will always depend on the control unit. If you decide to manually adjust, then first you will need to make a table on fuel consumption. Given this information, the bookmaker will carry out calculations and display the relevant parameters on the screen.
4. In addition, you will need to determine the parameters that the screen will start to show, depending on the model, their number may be different. Separately, it is necessary to highlight the parameter responsible for the activation temperature of the motor cooling fan.

Issue price

The minimum cost of a bookmaker from Multitroniks will be around 130 rubles. More expensive options may cost 7,500 rubles.

Sorry, there are currently no surveys available.

Video "How to make a BC with your own hands"

Detailed instructions for making the circuit are presented in the video (the author is the libral1973 channel).

On the cars of the Tenth Family, a clock or a computer is always installed next to the display unit. Now such computers are called "on-board computers" (BC). The computer display with the ignition off shows the time, but this is not its only function! We list all the capabilities of the on-board computer on the VAZ-2112, and the instructions supplied by the VAZ will help us with this. Tables that are important when setting up were copied from the instructions.

What BC are you talking about? The answer is in the video.

The appearance of the front panel is shown in the photo below. You need to remember the main keys: 1, 2, 3 and 5. All functions are divided into three groups. By pressing button 1, you can scroll through the functions of the first group. The same applies to other keys.

Regular BC for hatchback "Lada-112"

The question is, why is button 5 needed? Being in any of the three groups, this button activates additional functions. By the way, their number is two.

In each group, additional functions are different.

Swipe example

When the ignition is off, we see a clock on the display. Let's try to turn on the ignition and press key 1. The button itself can be pressed any number of times - the functions switch cyclically. Their number is three.

"Time" function group

If you need additional functions, click on button 5. We looked at how to use the standard on-board computer on the VAZ-2112, but the instructions are suitable for any "Tens".

Operation of the BC in different modes

The above says how to use the BC in the "Time" mode. The "Time" group is the first, but there are two more - "Fuel", "Way". Here are tables for them.

Function group "Fuel"

Above is the table for buttons 2 and 5.

Function group "Path"

Shown here are the functions enabled by buttons 3, 5.

Programming instructions

We will change different settings. And let's try to turn on the alarm, change the brightness of the backlight, etc. Thus, computer programming on the VAZ-2112 also applies to operation.

Setting up the fuel level sensor

The tank is initially empty. Turn on the "Fuel level" function (2-5) and press button 4 for more than two seconds. Next we follow the steps:

1. We press the button 3 for one second until the sound signal appears;
2. Fill the tank with three liters of fuel. We wait 10-20 seconds and repeat step 1;
3. Repeat steps 1 and 2 until 39 liters are filled.

Activate the overspeed alarm

By pressing the button 3 we turn on the "Average speed" function. Press the key 4. Then use the buttons 5 and 6 to set the required numbers. Finally, press button 4.

To disable the option, use the high threshold: 190 or 200 km/h.

Changing the backlight brightness

Let's use the function 1-3 "Time with stops". Press button 4. Use keys 5 and 6 to make adjustments. Press button 4.

Alarm

Go to the "Alarm clock" option (an additional function in the "Clock" list). Press button 4. Next, set the hour value (keys 5 and 6), press button 4, set the minutes value (keys 5 and 6). By pressing button 4 the alarm is activated.

Alarm clock in the car - a necessary thing

It remains to understand how to turn off the alarm. Follow all the steps until the hour is set, and then press button 1. The alarm clock should turn off!

How to set up calendar and clock

We have reached the most difficult chapter. Let's jump right into action:

For a quick adjustment, follow step 1 and step 2. If you then press button 1, the clock will round up from 13:57 to 14:00. Or in other words: it was 14:05, and it will be 14:00.

Our editorial 2112 with Gamma GF 212 BC. We are completely satisfied with it

The most popular non-standard BC on the VAZ-2110 is the Gamma GF 212 model.

Its cost about 2500 rubles . Installation is simple, you just need to connect to the K-line in the diagnostic connector and connect the power wires.

There are such useful functions as blowing candles and so on. On our own, we can only recommend it among a large number of models on the market.

Gone are the days when the word computer was spoken aloud by a few people. Today, this device is available in almost every home and has become a standard device in automotive technology. It has become an indispensable assistant for drivers, as it has taken over the functions of controlling the operation of most units of modern Vehicle.

PURPOSE AND MAIN FUNCTIONS

Cars that are made in Russia are equipped with such a device. So, for example, a regular on-board computer, became the first-born in the family VAZ cars. To put it in simple terms, then is a car guide on wheels. The driver needs it in order to know what is happening both inside the car and outside.

WHY IT IS INSTALLED IN THE CAR

The first versions performed few functions, these were the following:

• Control over the availability of fuel on the vehicle and the distance that can be covered on it. This will help the driver make the right decision in time to refuel or stop driving;
• Monitors the working in the motor and helps to prevent its overheating.

The use of more expensive versions of computers allows you to diagnose individual components and assemblies of the machine.

They are endowed with the ability to decipher the fault codes that the controller issues, and this allows the driver to:

1. To be informed in a timely manner about the problems that have arisen in a particular system of the machine, and to respond correctly to this. Eliminating the problem in its "embryo" eliminates costly repairs;
2. Get savings from the operation of the car.

ABOUT ITS FUNCTIONS

On-board computers VAZ 2114 are endowed and perform the following main functions:

1. Display information about which indicators have instantaneous parameters;
2. Conclusion to the information panel of information of the current nature;
3. Route parameters are reported. Under them understand information about the mileage, average fuel consumption, travel time and other data;
4. Ability to read error codes and diagnose a car engine. This allows you to receive information about all the problems of the power unit without lengthy consultations with "specialists".

Some of the models have additions to the main functions, among which may be:

• Information about the timing of the next maintenance of the machine;
• Some adjustments to the main functions;
• Control over the period of insurance;
• Availability of organizer functions;
• The ability to set the parameters at which it will be possible to turn on the fan in the cooling system.

ON THE PRINCIPLES OF FUNCTIONING OF SUCH SYSTEMS

Carburetor cars VAZ 2109 were equipped with devices with the functions of routers. Installation of injector power plants VAZ 2114, VAZ 2115 and other models required the use of a completely different type of device. Most of its functional activities are dedicated to diagnosing and controlling the operation of almost all devices and vehicle systems.

The work of the BC VAZ 2114 is based and has the following principle of operation:

1. Receiving signals from sensors through the control unit, processing them and issuing messages to the display, as well as the possibility of making adjustments for other systems;
2. Handling signals from systems that are not controlled by the controller. In case of occurrence emergencies, the corresponding icon is displayed on the information board, and an audible signal is also given.

HOW SUCH DEVICES ARE USED: QUICK INSTRUCTIONS

For installed devices, instructions are attached for the standard on-board computer VAZ 2114. It informs and instructs car owners in detail about what needs to be done in a given situation. Let's talk about how to use the VAZ 2114 on-board computer. For its proper use, you must:

• These trip computers are very complex electronic devices, endowed with the ability to perform more than 500 different functional duties. All this requires the driver to carefully study this device. The user manual helps with this. It is good to study it with the information board on;
• When studying, the most attention should be paid to the icons and symbols of emergency commands.
• has buttons that control the operation of the VAZ 2114 BC. You need to study and remember the rules for working with them.

When choosing such devices, there are no special requirements for them. The selected model must support the 2114 programs. Today, the cost of the VAZ 2114 on-board computer can be from 1500 to 4000 rubles. You can find even more of these products in online stores.

It makes no sense to memorize all possible error codes displayed on the information board. They do not need to be recited by heart as in school. We live in the age of Internet technology, find the designation of these error codes, print it out and take it with you in the car. In the case when you see the symbols on the information board, you can quickly make the right decision. Continue driving or call for technical assistance. Unfortunately, there are times when the on-board computer erroneously issues a danger signal. The culprit in such cases may be some kind of sensor or the processor itself. No one is immune from emerging electronics malfunctions, but in most cases, the scoreboard signals reliable information.

The main possible error codes on this machine will be shown below.:

• 2 - the voltage of the on-board network is exceeded;
• 3 - problems with;
• 4 - a malfunction with a sensor that monitors temperature regime motor;
• 5 - incorrect signal from the sensor outdoor temperature air;
• 6 - signal about an overheated motor;
• 7 - too low car lubrication system;
• 8 - problems with the braking system;
• 9 - battery undercharge.

You should respond to codes 4, 6 and 8, which must be eliminated and only then continue further movement. After elimination, the processor must be rebooted. Errors are reset by pressing and holding the daily run key.

WHAT TO DO WHEN BK STOP WORKING

It sometimes happens that the on-board computer does not work. What do experts advise to do in this case? First of all, you need to decide on. If it does not show “signs of life” at all, F3, which is installed in the power supply circuit of the VAZ 2114 processor. If its replacement did not “revive” its operation, check the connection connectors.

It makes no sense to describe the essence of the repair process of such a complex electronic product, since for this, in addition to having the necessary devices and tools, it is also necessary to have an education in the field of electronics.

The computer is today an everyday device that a large number of people encounter both at home and in a large number of vehicles. Speaking more specifically about car drivers, a computer, or as it is more commonly called, an on-board computer has become indispensable to each of them, because as soon as it can be used to take control of the operation of most units.

Video about the work of a non-standard BC on the VAZ-2114:

If we talk about cars made in Russia, then the first-born in the AvtoVAZ family was the VAZ-2114, on which an on-board computer was mounted directly from the factory, which was able to notify the driver about all the events taking place, both overboard and in the car. Below in this article we will analyze in detail why an on-board computer is needed, as well as analyze a brief instruction for it.

Established place in the instrument panel for the on-board computer. There is a cap on the photo.

The on-board computer of the first version, installed on the VAZ-2114, although it had few functions, however, easily monitored the main parameters of the car:

• Fuel level control , and its calculation of the number of kilometers traveled - this function allows the driver to decide in advance on refueling.
• Coolant temperature control – this function eliminates engine overheating due to timely informing the driver.
• Diagnostics individual nodes car - allows with maximum accuracy, and most importantly mobility, to detect and eliminate problems that have arisen.

Learn more about the functions of the on-board computer

On-board computers on the VAZ-2114 are capable of displaying the following information on their working screen:

• Instantaneous performance of the engine, its speed, temperature, readings of real and average fuel consumption.
• Information about the car's mileage, travel time.
• The ability to accurately read the errors that have occurred in the system, which will allow you to immediately determine whether it is worth contacting a car service with a malfunction or it is possible to fix everything yourself.

Modern on-board computers, by type Multitronics-C340 and its counterparts are also able to:

• Monitor and inform the driver in advance of the following technical inspection, car insurance, thereby performing the function of an organizer.
• Independently change the parameters for turning on the fan, change notifications about a sufficient warm-up temperature of the motor.
• It is possible to connect parking sensors.

Please note that in order to activate other advanced features that are in your BC, you may need to flash it.

The principle of operation of the BC on the VAZ-2114

Not a standard on-board computer

The principle of operation of the on-board computer at first glance seems primitive, however, in fact, it is a technically complex device that simultaneously receives, processes and, if necessary, notifies of the presence of malfunctions. The notification function occurs by displaying a special icon on the screen and giving a certain sound signal.

Brief user manual

For all on-board computers supplied to the VAZ-2114, there is a user manual, and if it is not in paper form, then it can be found on the Internet without difficulty, it is enough just to know the make and model of the device. Despite the fact that there are many options and models, their basic functionality is basically the same.

On-board computer readings.

• If you are just going to purchase a BC, then you should know if a particular model is suitable for your car's ECU. As a rule, the seller already has all the information, and there should not be any difficulties in this.
• It is better, first of all, when familiarizing yourself with the on-board computer, take time for the emergency command symbols and visual icons that appear on the display.
• Pay attention to the location of the buttons, and the rules for working with them, in order to quickly respond to changing parameters on the move (on some BC models, the keys can be blocked at a certain vehicle speed - approx.).

Error codes on the VAZ-2114

Since the ECU on all VAZ-2114s is similar or at least similar, it makes no sense to write them down in advance, let alone remember them, since some models are able not only to display it on the screen, but also to voice all the problems in the car .

by the most the best option identifying and clarifying faults, there will be a printed version of the error codes on the VAZ-2114. You can take them on the official websites of the BC manufacturers for the VAZ-2114, and below we will present you the most common mistakes that occur on the "fourteenth":

Codes	Description
0102, 0103	Incorrect control indicator signal level mass flow air.
0112, 0113	Incorrect temperature indicator signal intake air- the element needs to be replaced.
0115 - 0118	Incorrect signal of the coolant temperature measuring element - the sensor needs to be replaced.
0122, 0123	Interference or incorrect signal of the throttle position control indicator - it is advisable to replace the element.
0300	On-board computer (BC) detected random or multiple gaps ignition- in this case, the car may not start immediately.
0201 - 0204	An open in the injector control circuit has been detected.
0325	The on-board computer recorded an open circuit in the detonation device circuit.
0327, 0328	Damage to the knock sensor - the device needs to be replaced.
0480	The cooling fan is out of order - you need to replace the element.
0505 - 0507	There are malfunctions in the functioning of the regulator idle move, which affect the number of revolutions (lower or higher). If this code occurs, the regulators must be replaced.
0615 - 0617	During the diagnostic process, open or short circuits were detected in the starter relay circuit.
230	This error code means a breakdown of the fuel pump relay - the device must be replaced as soon as possible.
1602	It is one of the most common codes when diagnosing a BC for a malfunction. Means loss of voltage of the on-board network at electronic unit management.

What to do if the BC stops working

It happens that the BC stops working or the information that it should transmit and analyze is not transmitted. First of all, you need to pay attention to the integrity of the electrical circuit. Namely, the F3 fuse, which is responsible for its performance, then you should check the integrity of the wires that go to the diagnostic block and provide it with power. You can learn how to properly connect the on-board computer to the VAZ-2114 system in this article.

It is pointless to describe the process of repairing the on-board computer itself, because such devices break down infrequently and are of little repairability, therefore they have technically complex mechanisms inside them that require professional tools and skills.