Do-it-yourself Ford chip tuning involves replacing the standard firmware of the engine control unit. As a result of a well-executed operation, engine power will increase by 20-30%, the dynamics of the car will increase, and fuel consumption will decrease by about 10%. For achievement optimal performance all systems of the car there is no need to radically change their work. It is enough to slightly shift the calibrator sliders in the direction that suits your riding style. For flashing you will need to use:

• K-line adapter,
• notebook,
• firmware January 7.1,
• Chiploader program.

For chip tuning, we need a computer with Windows XP, since all other versions operating systems do not give the opportunity to reflash car ECUs with their own hands. The car engine control unit is located behind the glove compartment of the car. We dismantle the inner cover of the latter, after which we connect the adapter to the K-Line block. We connect it to the programmer, which must be connected to the laptop. Next, we launch the Chiploader program, look for the January 7.1 utility in its root folder and start installing the latter. After starting the firmware, Chiploader will indicate the need to calibrate the available Fusion parameters. We agree and start setting up the details.

It is very important not to overdo it during the calibration process and set each of the parameters correctly. To do this, the Chiploader program gives tips on how intensively to move the slider.

For example, if you move the slider too far to the left when adjusting the gearbox, then the car will work sluggishly in high gears, but it will become much more stable at low speeds.

After adjusting the settings, we agree and start flashing. We are waiting for the running line of loading to turn green, press the OK key, and then disconnect the K-Line adapter from the engine ECU.

2 Ford optics tuning

Fusion exterior enhancement can be done in different ways. It all depends on the financial resources of the owner of the car. The more you spend, the more effective the tuning will turn out. But if there are few funds, then you will have to start upgrading with those parts that require it in the first place. These items include headlights. Ford Fusion Or rather, foglights. Compared to other elements of the car's standard optics, this part has obvious defects - not only are the lights made of very low-quality plastic, but the lamps themselves turn off arbitrarily. To correct this situation, you will have to replace the wiring of standard optics and improve lighting with neon lamps. They can be purchased at car markets or in specialized stores.

To replace it, you will need to dismantle the protective glass of the headlights and pull out the standard Ford lighting fixtures. After that, carefully glue the double-sided tape to the back wall and mount the neon lights. Next, we connect new wiring to the foglights, the second part of which we stretch under the hood and connect to the switch in the cabin. We check the result and if everything works, we assemble the optics in the reverse order.

3 Installation of felt sound insulation in the car interior

There are various car accessories on the market, the purpose of which is to make the ride more comfortable. But before you buy them, it is worth improving the part of the cabin that needs it the most. We are talking about soundproofing Ford Fusion. To do the work yourself, you will need to use felt and flat pieces of foam.

Tuning Ford Fusion - the sporty look of a true sports car

External tuning, interior tuning, sports tuning, chip tuning and many other options to express your style and the style of your car! Tuning Ford Fusion is a variety of choices, assortment and many varieties of parts. Here and beautiful aerodynamic body kits, and newfangled LED optics, and a variety of pendants and much, much more.

"Meet by clothes" - as they say, we have it ... Tuning Ford Fusion - this is the very clothes by which you will be met, judged and considered. This is an important part of any person who wants to stand out from the gray mass of exactly the same. Who has a car of the highest level, which is further and nowhere else, and at the same time does not want to be like the rest. Even a banal airbrush allows you to emphasize your style, taste and capabilities.

Tuning Ford Fusion: a modern, perfect car

What should be the perfect car today? What qualities to have? What, after all, should he be "stuffed" with? No one can clearly answer these questions, for a number of important reasons. What can we say about tuning Ford Fusion in general?

After all, someone will have enough set basic configurations, and in a more extended list of functionality, he will not see the need. Someone is content with the standard body type, and considers it stupid to change it to some kind of sporty option. There are those, perhaps even the lucky ones, who believe that his car already has everything from the latest technology. Everyone has their own perfect car ... because. the concept of perfection is seen from a different angle and prism.

site - understanding all these nuances, knowing all such subtleties and desires, competently approaches the issue: tuning Ford Fusion.

Tuning Ford Fusion in our time

Today, Ford Fusion tuning is a full-fledged, profitable business. The popularity of tuning is growing every day, every hour! There are more and more cars that want to stand out from the entire gray mass, and there are also more, and not a few.

In our time, the car has become so affordable that in some families it is not one, but two or even three. And all of them are like a pattern, one to another ... And manufacturers, tuning studios, shops and private traders understand this very well.

Therefore, if today there is a desire to somehow stand out and highlight your car, then this will not be any problem. Various kinds of suspensions (screw, adjustable, etc.), aerodynamic body kits, radiator grilles (from carbon to chrome), spoilers and more. All this is easy to find, purchase, and it will not be a problem to find a place where to put it all.

You just have to decide what exactly you want to change or transform. And we will do the rest! Ford tuning Fusion is our forte!

Ford Fusion rightfully occupies a worthy place among cars that combine cost and quality. The car really has attractive appearance and has good assembly. Car tuning will help you stand out even more in the city traffic.

To achieve the task, you can send your iron horse to the auto center for several days, but if you have the desire and hands in place, then doing some work with your own hands will not be difficult.

How to improve your car

Motorists who are used to standing out in a crowd of cars should not forget that any vehicle can be improved. This also applies to the Ford Fusion. What can be done with the car and emphasize its features?

Here are some examples:

• coating paintwork body with a special vinyl film;
• device of LEDs and neon lighting;
• dismantling the standard bumper and installing a new body kit;
• fastening of a decorative lattice, overlays on thresholds;
• replacement brake pads and pendants;
• making changes to the interior of the cabin;
• car chip tuning;
• removal of old optics and installation of a more modern one

Advice. To begin with, estimate how much money should be spent on all the work and whether the car will not work worse after the reconstruction.

Technical improvements to the car

To better feel the speed when driving, it is enough to make adjustments to the work power unit, namely - chip tuning of the engine. By the way, the procedure is not easy and it needs to be carried out in special car services. The electronic control unit is being reprogrammed. The result will not leave you waiting long - the engine power is increased by 20 percent, the dynamic characteristics, consumption decreases fuels and lubricants. For electronic correction you will need:

• computer with installed program for firmware;
• firmware;
• additional equipment: programmer and adapter.

In a Ford Fusion the electronic unit engine control is located behind the glove box on the driver's side.

Advice. It is recommended to carry out work on the calibration of engine parameters only with sufficient knowledge and experience.

Salon change

The interior of the car requires special attention. On a long trip, the driver can get tired for various reasons, such as an uncomfortable car seat. It is better to choose just such an instance in which it will be as comfortable as possible, you can from another car. If the seat mounts do not fit, they can be redone. Another, the easiest way to create a comfortable chair is to install special car covers with massage inserts. Covers will not only be useful for the health of the driver, but also embellish the interior of the car. For winter riding, it is better to “wear” heated covers, and in summer, hang a bamboo cape on the seat so that your back does not sweat.

It will not be superfluous to install a new multimedia system on the dashboard.

Ford Fusion has poor sound insulation, therefore, it is recommended to carry out a number of measures to improve the interior of the body with high-quality soundproofing material.

Optics improvement

Creating an individual image of the car depends on the financial capabilities of the car owner and can be performed different ways. Of course, more investment will help create a more spectacular car.

Replacing the headlights is the first thing that will allow you to diversify the appearance of the Ford Fusion. Lens optics looks very nice with neon lights. Such lamps in a wide range can be found in specialized car dealerships.

You can purchase ready-made products or buy neon lights separately and put them in the headlights yourself.

Making changes to the body structure

There are several ways to transform and improve the appearance of a car:

• installation of decorative body kits and door sills;
• applying stickers to the body;
• mounting chrome accessories;
• airbrushing.

Due to body tuning, the car that we used to see on our roads turns into a work of art, standing out in the general flow of cars, attracting the attention of others.

Another small detail that could improve the rear end of the Fusion is the chrome muffler.

How much money do you need to save up for beauty care?

A little about rubber. It is better when there are two sets in the garage: road and mud. The first is suitable for measured city driving, and the second for off-road driving or snow-covered roads.

A photo selection is presented on the Internet interesting ideas tuning Ford Fusion, which can be taken as a basis.

Soundproofing Ford Fusion

Soundproofing Ford Fusion will help turn driving this car into a more comfortable pastime. Soundproofing Ford Fusion is a very important and weighty procedure.

Thanks to properly performed sound insulation, you can not only increase comfort, but also insulate the car body, eliminate various shortcomings (squeaks and vibrations of plastic elements), and most importantly, improve the acoustic properties of the cabin.

What is the procedure

Why are doors given the most attention when soundproofing?

The fact is that it is here that the car speakers are installed, which are responsible for playing music. If the doors are not insulated well enough, then there is no need to dream of any high-quality sound.

The procedure for isolating doors, in principle, is not difficult. It is for this reason that many people decide to conduct Shumkov with their own hands, realizing that in the service station they will take a lot of money for such services. Saving money is not the only reason for choosing a do-it-yourself installation.

No one, except the owner himself, will make sound insulation better (provided that the owner of the car is endowed with the necessary knowledge). Professionals, on the other hand, think more about how to make money than to do their job well (in Russia, this statement is hard to argue with).

So below is step by step algorithm installing soundproofing material on Ford Fusion doors.

Algorithm for installing soundproofing on the door

First, let's find out what materials we need:

• As a vibration insulator, it is recommended to use the material "Shumoff 3M". It will take about 25 sheets, although it all depends on the size, and most importantly, the ability to work with the material. As a rule, beginners and incompetent spend much more material than experienced craftsmen and specialists (this must be taken into account);

• As a noise insulator, it is recommended to take Polyfoam 6 mm. Approximately 6 sheets will be enough;
• Be sure to purchase White Spirit, which perfectly degreases surfaces before gluing materials;

• A construction or technical hair dryer will help heat the material to the desired temperature.

Note. By the way, in the service station, a special oven is used for heating, in which the materials receive the desired temperature in advance. This saves a lot of time. Unfortunately, it is almost impossible to use this method at home. But the hair dryer will not let you down, as it quickly heats the materials to the required temperature.

• A roller is also required, with which it is easy to smooth the pasted sheets. This must be done so that no air bubbles remain under the material, which in the future will adversely affect the service life of the material and its effectiveness;
• It is necessary to prepare screwdrivers, it is better to have a kit in which there are tools like TORX (asterisk);
• It is also recommended to arm yourself with a set of socket / box wrenches.

We figured out the materials and tools, now to the most important:

• First of all, you need to remove the trim from the door. It is clear that the door must be opened to make it more convenient to work;
• Next, disconnect the cable;
• We unscrew and dismantle the speaker supplied at the factory (as a rule, this sound emitter cannot provide a decent sound level and it is changed to a more productive one).

Note. For dismantling, it is recommended to use Torx wrenches (asterisks). Some bolts may not be difficult to remove at all. But there are those whose work will make you feel like an amateur (you will have to suffer, but the result is worth it).

We continue:

• We must now turn off the STKPD motor;
• Then completely remove the door card, trim;
• We get direct access to the internal parts of the door, with which we will have to work;
• We process the surfaces of the outer inner part of the door (the part of the door that faces the street) with White Spirit;
• We prepare a vibration isolator by cutting it to the size of the door, and then heating it with a hairdryer.

Advice. If it is not possible to find a technical hair dryer, you can use blowtorch. But you need to act with extreme caution, observing safety measures!

• We put sheets of vibration isolator on the door;
• Now we take on the "shumka". But in this case, there is no need to heat anything. The material has an adhesive layer and it is enough just to remove the protective film to carry out sizing;
• We process the inside of the door from the passenger compartment in the same manner;
• We collect everything back, installing the casing, the motor and the new speaker in place.

Little things mean a lot

Here's what to do:

• With the remaining vibration-insulating material, process everything problem areas doors;
• Add an anti-creak to the area near the mirror;
• Treat the door trim (also anti-creak).

Basically, that's all. Video and photo materials will help in the implementation of the event, give a practical understanding of what is happening. The instruction can be supplemented with information from other sources (on our portal you will find many interesting articles on the topic of soundproofing).

The price of the procedure will not be high if you work with the material carefully and economically.

Refining production cars can be divided into two types: useful tuning and various styling. In the ObvesMag online market it is possible to choose and buy accessories for Ford Fusion 2002-2012, this will make the car even more stylish. It will be very pleasant for any motorists not only to stand out in the stream, but also to install devices that are indispensable in operation. Buy tuning from leading Russian and foreign manufacturers, and every day your soul will admire the unique and unforgettable appearance of this car.

In Russia, a huge variety of tuning accessories for Ford Fusion 2008-2011 is produced, and our customers constantly ask themselves: what to look for first? The Obvesmag store can recommend that you first consider the things without which the use of your car cannot be very pleasant and easy. In the interior of any car, it is imperative to buy floor mats that will help avoid dampness and retain moisture. In a car, not only is there a chance of rust developing, but there is also a risk of broken wiring, which is even more dangerous.

The next type of major change is the installation of window and hood visors. Similar tuning will protect Ford Fusion 2009-2010 from winds and chips. In the ObvesMag store there are deflectors of individual types and sizes in the catalog. For example, deflectors with stainless moldings: such accessories have an excellent appearance.

Body kit installation in Moscow

The main direction of tuning Ford Fusion, which our store offers, is the implementation of a steel body kit and aluminum sills. Car footrests can help you get into the passenger compartment and make the use of cars more comfortable. Without footrests, it will be difficult for children and older people not to stain clothes and shoes, without them it is inconvenient to clean the roof of snow or install bicycle racks.

A practical stainless steel body kit will help protect bumpers and car doors from collisions with neighbors in traffic jams and other damage. Many small collisions will go unnoticed with a powerful assembly and thick steel. Such tuning for Ford Fusion is vital when driving on bad roads or in the conditions of crowded modern big city with lots of cars.

The ObvesMag store boasts a huge number of different accessories for tuning the interior and appearance cars. Various covers for mirrors, spare wheel boxes and spoilers. Any such accessory will make the look modern car more stylish and attractive. You can install our tuning yourself or in our service center on the day of purchase. We will deliver the goods for tuning in Moscow by courier or to any point in the Russian Federation by logistics companies: this is fast and reliable.