What oil is better to fill in a Mercedes engine. Original Mercedes engine oil. Diesel power units

17.11.2014

Mercedes. Name of this legendary brand cars for all drivers is associated with different concepts. For some, it is quality and reliability. For others - beauty and aesthetics. And for the third - a symbol of prosperity and stability. But most owners of these German cars will not argue with the fact that it is necessary to take care of such a machine with great care.

This postulate remains valid when searching for an answer to the question “What kind of oil to fill in Mercedes?”. Indeed, when selecting this most important lubricant, one should keep in mind many factors, the main of which, without a doubt, is the recommendation of the automaker itself. This value is called "tolerance" and is most often found in alphanumeric format. The Mercedes-Benz concern prefers to draw up its recommendations in this form: "MB 229.1". Only a specialized specialist will be able to decipher these designations, while an ordinary owner simply needs to know the lubricant approval for his car. You should look for such a designation in service book, and then - on cans of engine oil.

Over the many years of the existence of the Mercedes concern, many tolerances have been created. We will talk about the most popular of them.

What kind of oil to fill in Mercedes with MB 228.1 approval?

This tolerance value indicates that the canister contains all-weather lubricant Super High Performance Diesel (SHPD) format for engines that operate under high loads.

Engine oil in Mercedes with MB 228.1 approval from HAMMER:

What oil to fill in Mercedes with MB 228.3 approval?

Canisters with this approval contain all-weather motor oil for engines of heavy construction and trucks. This lubricant can be used in both non-turbocharged and turbocharged systems. Under various operating conditions, the timing of the replacement of this oil can vary from 45 to 60 thousand kilometers.

Engine oil in Mercedes with MB 228.3 approval from HAMMER:

What kind of oil to fill in Mercedes with MB 228.5 approval?

MB 228.5 is approved for Ultra High Performance Diesel (UHPD) format oils, which are used under heavy loads and comply with Euro-1 and Euro-2 environmental standards. These lubricants have extended replacement periods.

Engine oil in Mercedes with MB 228.5 approval from HAMMER:

What kind of oil to fill in Mercedes with MB 229.1 approval?

MB 229.1 approval is placed on cans of engine oil, which is intended for car engines that began to roll off the assembly line in 1998 and ended in 2002. The manufacturer does not recommend pouring this lubricant into models manufactured after this period. In particular, we are talking about petrol versions M28, M271, M275 and diesel OM648, OM647 and OM646.

Engine oil in Mercedes with MB 229.1 approval from HAMMER:

What oil to fill in Mercedes with MB 229.3 approval?

Engine oils with extended drain intervals have this tolerance. Sometimes this value can reach up to 30 thousand kilometers. These lubricants are especially recommended by the manufacturer for use in passenger cars of the M100 and M200 series with gasoline engines, as well as in those OM600 engines that use diesel fuel, except for some models equipped with a diesel particulate filter.

Engine oil in Mercedes with MB 229.3 approval from HAMMER:

What kind of oil to fill in Mercedes with MB 229.5 approval?

The MB 229.5 approval designates those engine oils for Mercedes cars, which not only have extended replacement intervals (in some cases, up to 30 thousand kilometers), but also fully comply with the most current environmental standards. Such oils allow the engine to operate in a more economical mode, which means it consumes less fuel.

Engine oil in Mercedes with MB 229.5 approval from HAMMER:

The Mercedes concern places the highest demands on lubricants and obliges the leading manufacturers of motor oils to strictly comply with them. After all, this is the only way to be sure of the quality of the final product. That is why it is necessary to choose motor oil for Mercedes brand cars, focusing on the manufacturer's approval, which can always be found in the service book or specialized literature.

Motor Mercedes oil MB 229.51 5W-30

synthetic, 5w-30, petrol/diesel
Description

Engine oil is recommended for use in diesel engines with particulate filters, as well as modern gasoline engines. For motor oils approved for this approval, an extended service interval is provided compared to MV 229.31, up to 20 thousand km. The basic requirements are in accordance with ACEA A3 B4 and C3. The MB 229.51 approval was introduced in 2005.

What is the difference between 5w30 oil and 5w40 oil

Motorists know that choosing the right engine oil for an engine is an extremely important task. It is good when the manufacturer recommends a specific brand and type of oil. However, older car owners do not have this advantage. It is necessary to determine the right engine oil as accurately as possible so that the engine does not give surprises at the most inopportune moment. But there are so many markings on oil cans. For example, 5w30 oil and 5w40 oil. What is the difference?
Definition of oil 5w30 and 5w40

5w30 oil is an engine oil that is used to lubricate car engines. The oil designation contains two numbers that reflect the most important property of engine oil - viscosity at low and high temperatures. To start the engine at low temperatures, you need to choose an engine oil that should not be very viscous. And in summer, at high temperatures, the oil, on the contrary, must keep the lubricating film between the parts. The first number in the "5w30" designation is the winter use class (the letter "W", that is, "Winter", confirms this), the second number is the summer use indicator. Thus, the oil is multigrade.

5w40 oil is a multigrade motor oil with a winter application class of 5w and a high temperature index of 40. These designations are accepted in the SAE specification (Society of Automotive Engineers) and are an international standard for determining the viscosity of motor oils. Note that the viscosity-temperature characteristics of motor oils are paramount in determining quality.

Comparison of 5w30 and 5w40 oils

It is known that motor oil consists of basic base oils and various thickening additives. It is these additives that give the desired effect in winter or summer time. However, today, probably, to facilitate the work of a motorist, multigrade oils are more often used. The viscosity grade of engine oil depends on the quantity and quality of thickeners. In addition, this versatile oil changes its viscosity under the influence of shear rate. The slower the speed, the higher the viscosity.

The motor oils we are comparing today have different amounts of thickeners. As a consequence, the second number, the viscosity characteristic at high temperatures, is different. That is, 30 or 40 is an indicator of how long engine oil is able to keep a protective film when summer temperatures rise. This is a very important property for keeping the motor from premature wear and preventing the engine from stopping in the heat while in a traffic jam.

Taken from various internet sources :)

P.S. So, dear guest, my opinion is pour what you poured and provided by the manufacturer of your Murzik. (100% agree with Willy)
If your engine does not "eat" oil.

In the event that he began to "eat butter"
there are 2 options.
1. Overhaul of the engine (expensive), or a new engine (even more expensive).

2. Use additives in oil. (I checked it myself on an old woman Mazda Demio 1.5 with a run of 230 because)

I used the additive "Visco-Stabil Viscosity Stabilizer" from the company "Liquimoly".
The result of changing the additive is 0.5 liters of oil savings by 5 since (this is with an oil filling volume of 3.2 liters in the engine).

The qualitative composition of engine oil affects the resource, efficiency and common work engine. Therefore, when choosing a lubricant, it is worth considering not only its base (synthetic, semi-synthetic, mineral), but also the group, class, and also the viscosity of the liquid. This article describes the characteristics of the recommended engine oil for Mercedes-Benz E Class.

Mercedes-Benz E W124 S124 A124 C124 1984-1997

Model 1996 release

Gasoline motors

car manufacturer Mercedes Benz E Class for engine lubrication systems 102 it is recommended to use lubricants that meet the requirements of:

motor oil class G4 according to CCMC classification or SG according to API standards;
viscosity 10w-40 or 10w-50;
filling capacity is 5.5 liters.

For lubrication systems of motors 103 and 104 of Mercedes Benz E Class cars, according to the operating instructions for the car, it is recommended to fill in lubricants with a viscosity of 15w-40 or 15w-50. The capacity of the lubrication system is 7.0 liters. The difference between the maximum and minimum mark on the dipstick is 1.5 liters. It is recommended to replace the car oil by the car manufacturer every 10 thousand kilometers or 2 times a year. The approximate amount of lubricant that will be needed when replacing, taking into account oil filter is 6.0 liters (including 1.0 liters of oil in the filter).

The volume of engine oil required when replacing for other types of engines, taking into account the oil filter, is:

5.8 l. for model 200;
5.9 liters if model 230;
6.5 liters for model 260 or 300;
7.5 liters if the model is 280 or 320.

Diesel power units

It is recommended to fill in Mercedes Benz E Class motor oils that correspond to the CD oil type and have a viscosity of 15w-40 or 15w-50. The frequency of changing the lubricant is 10 thousand km. The difference between the maximum and minimum mark on the dipstick is 1.5 liters. The volume of engine oil required when replacing, taking into account the oil filter, is:

6.5 liters if model 200;
8.0 liters for 250 or 300 turbocharged models;
7.0 liters if the model is 250 or 300 without turbocharging;

Mercedes-Benz E W210 S210 1995-2003

Model year 2001

Gasoline motors

according to CCMC-G4, CCMC-G5;
according to API classification - oil type SG;
in accordance with ACEA A2-96 or ACEA A3-96.

The selection of viscosity is based on the air temperature of the region in which the machine will be operated. All-weather motor oils with a viscosity of 15w-40 or 10w-40 are used in regions with a large temperature range. For regions with too low or high temperatures, it is worth choosing special motor oils designed for summer or winter. To select a lubricant for too hot or cold regions, you should contact your Mercedes Benz E Class dealer.

The volume of engine fluid required when replacing, taking into account the oil filter, is:

5.5 liters for the E200 model;
8.0 l for models E 240, E 280, E 430, E 320, E 280 4MATIC, E 320 4MATIC;
8.5 l in the case of the E 430 4MATIC;
7.5 liters if the equipment is E 55 AMG.

Diesel engines

The manufacturer Mercedes-Benz E Class recommends motor oils for its cars that meet the requirements of CCMC-D4, CCMC-D5 and CCMC-PD2. In the absence of the specified motor fluids, lubricants that comply with API CE or CF-4 can be used. The selection of viscosity is carried out taking into account the temperature outside the machine according to scheme 1.

Scheme 1. The dependence of the viscosity index on the temperature of the region in which the car will be operated.

Explanation of scheme 1:

SAE 30 is poured in the temperature range from +25 0 С to + 15 0 С;
SAE 40 is used if the temperature is above +25 0 С;
5w-30 is poured if the temperature is below +5 0 С;
5w-30 CCMC-G5 is poured at a temperature of less than +30 0 С;
5w-40, 5w-50 is suitable for the temperature range from +30 0 C (or more) to -30 0 C (or less);
10w-30 is poured in temperature conditions from +10 0 С to -20 0 С;
10w-30 CCMC-G5 is used under temperature conditions of +30 0 С to -20 0 С;
10w-40, 10w-50, 10w-60 are used if the temperature is over -20 0 С;
15w-40, 15w-50 are used if the temperature is above -15 0 С;
20w-40, 20w-50 are used if the temperature is above -5 0 C.

Short-term temperature changes are not taken into account when choosing the viscosity of the oil. Also in the manual, the manufacturer indicates that the maximum allowable lubricant consumption is 1.5 l / 1 thousand km.

The amount of lubricant required when replacing, taking into account the oil filter, is:

6.0 l for E 200 CDI, E 220 CDI engines
7.0 l for E 270 CDI engines;
7.5 liters for E 320 CDI engines.

Mercedes-Benz E W211 S211 2002-2009 release

Model year 2008

The manufacturer Mercedes-Benz E Class recommends the use of engine fluids that meet certain requirements. The compliance of the oil with the required standards is indicated by the tolerances that are applied to the container with the lubricant. For example, on a canister of oil there will be an inscription: "Approved according to sheet MB 229.1, 229.3 or 229.5."

Gasoline motors

Scheme 2. The dependence of the viscosity characteristics of the oil on the air temperature outside the machine.

Decryption of scheme 2:

0w-30, 5w-30 is suitable for the temperature range from +30 0 C (or more) to -25 0 C (or less), also under similar temperature conditions it is allowed to fill in 0w-40, 5w-40 or 5w-50;
10w-30, 10w-40, 10w-50 or 10w-60 are used if the temperature is more than -20 0 C;
15w-40, 15w-50 are used when the thermometer reading is over -15 0 С;
20w-40, 20w-50 are used when the thermometer reading is over -5 0 C.

The amount of oil that will be needed when replacing, taking into account the change of the oil filter, is:

8.0 l for engines E 240, E 320;
7.5 l in the case of E 500;
8.5 l for E 55 AMG engines.

Diesel engines

Recommended engine oil for Mercedes-Benz E Class must meet tolerances 229.3 or 229.5. Viscosity selection is carried out according to scheme 2. The volume of engine oil required when replacing, taking into account the oil filter, is equal to:

6.5 l for E 200 CDI and E 270 CDI engines;
7.5 l for E 320 CDI engines.

Mercedes-Benz E W212 S212 2009-2017 release

Model 2013 release

To provide optimal performance engine, the manufacturer recommends the use of lubricants that meet certain tolerances. You can get acquainted with the list of recommended motor fluids on the official website http://bevo.mercedes-benz.com.

Gasoline motors

3, 229.5, 229.51 for E 200 BlueEFFICIENCY or E 250 BlueEFFICIENCY;
3, 229.5 for E 300, E 300 BlueEFFICIENCY, E 300 4MATIC BlueEFFICIENCY, E 350 BlueEFFICIENCY, E 350 4MATIC BlueEFFICIENCY;
5 if we consider the engines E 500 BlueEFFICIENCY, E 500 4MATIC BlueEFFICIENCY, E 63 AMG.

In the absence of the above motor oils, one-time topping up (not more than 1.0) of motor fluids with approvals 229.1, 229.3, or meeting ACEA A3 standards is allowed.

The selection of the viscosity characteristics of motor oil is carried out according to scheme 3.

Scheme 3. The dependence of the viscosity of the motor fluid on the ambient temperature.

According to scheme 3, for the temperature range from +30 0 C (or more) to -25 0 C (or less), lubricants 0w-30, 0w-40 are used. At temperatures above -25 0 C, motor oils 5w-30, 5w-40 or 5w-50 are poured. With a thermometer reading over -20 0 C, use 10w-30, 10w-40 or 10w-50, 10w-60. If the temperature is more than -15 0 С, greases 15w-30, 15w-40, 15w-50 are poured. Engine fluids 20w-40 or 20w-50 are poured at temperatures above -5 0 C. Please note that only oils with a viscosity of SAE 0w -40 or SAE 5w -40 can be used for AMG cars.

Diesel car engines

According to the manual, for models with a particulate filter E 200 CDI BlueEFFICIENCY, E 220 CDI BlueEFFICIENCY, E 250 CDI BlueEFFICIENCY, E 250 CDI 4MATIC BlueEFFICIENCY, E 300 CDI BlueEFFICIENCY, E 350 CDI BlueEFFICIENCY, E 350 CDI 4MATIC BlueEFFICIENCY, E 350 BlueTE engine oils with approvals 228.51, 229.31, 229.51.

In the absence of the above oils, one-time topping up (not more than 1 liter) of engine fluids that meet the requirements of 229.1, 229.3, 229.5 or ACEA C3 is allowed. The selection of the viscosity of the motor fluid is carried out according to scheme 3, taking into account the temperature outside the machine.

Refueling tanks

The amount of oil required when replacing is equal to:

5.5 l for E 200 BlueEFFICIENCY, E 250 BlueEFFICIENCY;
6.5 l for engines E 200 CDI BlueEFFICIENCY, E 220 CDI BlueEFFICIENCY, E 250 CDI BlueEFFICIENCY, E 250 CDI 4MATIC BlueEFFICIENCY, E 300 BlueEFFICIENCY, E 300 4MATIC BlueEFFICIENCY, E 350 BlueEFFICIENCY, E 350 4MATIC BlueEFFICIENCY
8.0 l if power units E 300 CDI BlueEFFICIENCY, E 350 CDI BlueEFFICIENCY, E 350 CDI 4MATIC BlueEFFICIENCY, E 350 BlueTEC, E 300, E 500 BlueEFFICIENCY, E 500 4MATIC BlueEFFICIENCY.
8.5 l for E 63 AMG engines with external oil cooler.

Mercedes-Benz E W213 S213 from 2016 release

Model 2016 release

Recommended engine oil for Mercedes-Benz E A class that ensures high engine efficiency and long-term operation must meet certain tolerances. You can get acquainted with the list of original motor oils that meet the requirements of the MB on the official website http://bevo.mercedes-benz.com.

Petrol power units

According to the operating instructions for a Mercedes Benz E Class car, lubricants with tolerances of 229.5 must be used. For AMG machines, it is permissible to fill in only lubricants with a viscosity of SAE 0W-40 or SAE 5W-40.

V emergency situations one-time topping up (not more than 1 liter) of engine oils with the characteristics of MB-Freigabe (Mercedes-Benz approval) 229.1, 229.3 or ACEA specification A3. The choice of oil viscosity is made according to scheme 3, depending on the temperature of the region in which the machine will be operated.

Diesel car engines

Based on the manual Mercedes-Benz cars E Class For E 350 CDI models, oils with approvals 228.51, 229.31, 229.51 must be used. In the case of other configurations diesel cars use motor oils with tolerances 228.51, 229.31, 229.51, 229.52. In the absence of the above lubricating fluids a one-time top-up (not more than 1 liter) of oil with the characteristics of MB-Freigabe (Mercedes-Benz approval) 229.1, 229.3, 229.5 or ACEA C3 specification is allowed.

The viscosity of the engine oil is selected according to scheme 3, taking into account temperature regime outside the car.

Refueling tanks

The volume of engine oil required when replacing is equal to:

6.1 liters for the E 180 engine;
6.3 l if power units E 200, E 250;
8.0 l for engines E 300 BlueTEC, E 350 CDI, E 350 BlueTEC, E 350 BlueTEC 4MATIC, E 500, E 500 4MATIC;
8.5 liters if the car is AMG;
6.5 liters for other car models.

Conclusion

The manufacturer in the operating instructions for the machine indicates the parameters of the recommended engine oil for Mercedes-Benz E Class. It also describes the lubricants that can be used for topping up. Please note that after topping up, having reached the nearest service station, it is worth changing the car oil, since prolonged driving with mixed oil is prohibited. It is also unacceptable to use various additives, their use can lead to engine failure.

What oil should I choose for a Mercedes (diesel)? Currently, Mercedes-Benz cars are among the best in the world. This is very quality cars running on petrol and diesel engines. Their power is constantly growing, and consumption fuels and lubricants is steadily declining. At the moment, there is a wide selection of components and special tools, among which oil for Mercedes (diesel) can be noted.

Currently, Mercedes cars are among the best in the world.

Difficulties with the choice of oil

The car owner will have to make an informed choice between one or another means. In many ways, the technical serviceability depends on the correctness of the decision made. vehicle. Any breakdown of a Mercedes car will require significant financial expenses from the owner of the car to restore the car's performance.

Mercedes civilian products account for only 13% of the company's production. The rest is military products. Therefore, cars of this brand are very high-tech and require a serious attitude to maintenance. Pouring some oil into the engine means premature failure of rubbing surfaces, which will not be easy to replace. Cheap and affordable analogues to it can not be found. Therefore, the choice of oil must be approached with knowledge of the matter. But the problem is that motorists do not really like to read what is written on the label. Motorists can be understood, since the inscriptions on the labels are more like some kind of codes or ciphers. But learning them is not so difficult. They determine two main characteristics of oils: viscosity and quality.

Back to index

Viscosity and quality standard

The first thing you should pay attention to is viscosity. It must always appear on the label of the certified product. Now on sale the main tone is set by all-weather oils, which are very much in demand by the consumer, so we will only talk about them. The standard viscosity classification is indicated by markings 5W-40 or 10W-40. At first it is quite difficult to understand what they mean, but it is these numbers that clearly define the classification and specification of oil products.

The first letter after the number 5 means winter, from the English winter. This suggests that this product is excellent for winter work and has an appropriate viscosity level. The first digit indicates how much oil will pass through the lubrication system, being distributed in it. The number 40 after the hyphen indicates the viscosity in the summer. This refers to viscosity at temperatures up to 40ºC. If, for example, the label says 30 instead of 40, this means that the product will only work optimally at 30ºC. If the temperature is higher, operational properties oils will drop.

Diesel oils belong to the highly profiled CF class. These are high quality materials for use in forced diesel engines turbocharged. It is this oil that can be suitable for a Mercedes with a diesel engine.

Back to index

Oils for Mercedes diesel engines

There are quite a few different variations of oils for diesel models of the Mercedes brand. All of them have the required level of clearance. Some motorists may not fully understand what an oil tolerance is. Actually automobile concerns have always placed great demands on lubricant manufacturers.

Oils for diesel engines choose correctly according to the level of tolerance, because any product sold is repelled from the received standard. Among the oils for diesel engines, Daimler-Chrysler / Mercedes Benz are noted, which have approval and certification. They are represented by the following means:

All-season oil with MB 228.1 approval. Approved for diesel engines, excellent for trucks turbocharged. There is an increased interval between oil changes, which is compatible with elastomeric gaskets, has quality in priority, and then viscosity. It sells well in Europe, and is less common in Russia.
Approval MB 228.3. Lubricant intended for use throughout the calendar year has a multi-viscosity property. Great for both cars, and for huge tractors with or without turbocharging. The car can do without changing the oil element for about 60 thousand kilometers.
MB 228.31. All-weather oil for diesel vehicles equipped with particulate filters. Anti-ash additives are introduced into the oil.
MB 228.5. Highly environmentally friendly product, which is replaced after 50 thousand kilometers for light vehicles, and for heavy trucks - after 160 thousand kilometers.
MB 228.51. Year-round lubricant, the replacement of which is carried out after 45 thousand kilometers. In it, according to Euro-4 standards, an underestimated amount of phosphorus and sulfur. It's more expensive, but it pays off. good condition car.
MB 229.1. Engine oils specially produced for cars that left the assembly line before 2002. Not recommended for newer brands. It can be used not only on a diesel engine, but also on a gasoline one. The product is in great demand both in Europe and in Russia.
MB 229.3. Lubrication works all year round, the average replacement period is suitable after 30 thousand kilometers. Doesn't work well with vehicles with particulate filter. Because of this, the price is slightly lower than, for example, that of the Euro-4 standard.
MB 229.31. Lubricant for cars, minibuses equipped with particulate filters. The composition of the liquid contains a minimum amount of sulfate ash.
MB 229.5. Oils that meet the increased requirements for environmental protection. Suitable for passenger cars, provide minimum fuel consumption. They can be used on gasoline engines. The downside is that the lubricant does not fit well with models with a particulate filter.
MB 229.51. Used all year round, suitable for cars, combined with those that have a particulate filter, has a lower ash content.

The above tolerances are only a small part of the funds available for sale. There are a lot of them, and they have a wide variety of properties that can individually fit any Mercedes car that runs on diesel fuel.

A big misconception is the opinion that it is believed that these indicators can be taken and measured. After all, the figures in question are a collective indicator. The existing classes are assigned to the oil only after its comprehensive study and measurement of all parameters and properties of viscosity determination. Next, you need to choose a quality standard. API is the highest quality mark, it is divided, in turn, into 2 categories according to its intended purpose: for gasoline and diesel engines. Each of these categories is divided into classes. These classes define the final purpose and specification of the product. This classification must be strictly adhered to when purchasing a lubricant.

The manufacturer is interested that the service life of his products is not less than the declared one. Provides it correct operation, which determines the choice of oil of the required quality so that its properties meet the requirements of individual car models. Tolerance is a certain quality standard for produced and consumed engine oil, which meets all the necessary parameters that are considered mandatory by the car manufacturer.

Thus, a key criterion during the selection of an oil product for a car should be tolerance.

By reading the approval code, you can immediately find out all the properties of this product. The tolerance must be indicated on the label of the product being sold. If it is not there, then the quality of the oil without a permit can be called into question. How can you know its purpose?

Choosing the right lubricant is just as important as choosing the right fuel. If it is done incorrectly, it will lead to a technical malfunction of the car, expensive repairs and stress. That is why you need to purchase only the highest quality lubricant that has the necessary tolerance.

Oil is the main consumable and essential component for the proper operation of the Mercedes engine. The performance of the motor and its guaranteed service life directly depend on the quality of the oil and its condition. Car manufacturers are well aware of this and therefore create their own maintenance regulations, as well as forcibly, in order to maintain a guarantee, they are obliged to change engine oil at intervals of 10 and 15 thousand kilometers.

What kind of oil to fill in a Mercedes? There are many points of view, as well as a variety of oils. But the Daimler concern decided to simplify the answer to this question and in 2011 began to produce original Mercedes engine oil under its brand. And it turned out to be an extremely effective marketing and financial decision!

Of course, Mercedes does not produce motor oil on its own, but purchases from leading manufacturers (Mobil, Shell, Fuchs, etc.), then packaging and labeling under its own brand. But for the end buyer, this simplified the selection process, because with this step, the manufacturer himself made the choice for the client, guaranteeing quality and reliability. And unlike other car companies, Mercedes now offers full line consumables for a full Maintenance.

During the time that motor oil began to be produced under the sign of a star, it has successfully established itself. On the this moment under the name of the original Mercedes engine oil, several types of oils are produced, including those for uprated AMG engines. Each of them has its own tolerance and its own unique characteristics.

Old oils from tolerance sheet 229.3 and 229.31 are almost never used at the moment;
New synthetic oils with Mercedes approval 229.5 for gasoline engines and 229.51 for diesel engines;
The latest engine oil with a tolerance of 229.52 for diesel engines.

Mercedes engine oil change

The manufacturer's regulation states a mandatory replacement of engine oil as part of the planned ones. Maintenance intervals depend on many factors - the manner of operation, the statute of limitations of the previous maintenance, the distance traveled since the last maintenance.