The MKSM-800 loader has gained popularity in Russia, as it is known for its ability to perform various tasks, its small size, simple operation and maintenance, as well as its reasonable price and efficiency in the work process. This machine, along with other civil and military equipment, is produced by one of the largest Russian manufacturers– Kurgan Machine-Building Plant.

The MSKM-800 mini-loader is used in all cases where strength and maneuverability are needed at the same time: in industrial processes and during construction work, during loading or unloading, it is used by utilities and various farms, even in closed small spaces.

Navigation

The small size and maneuverability of the MSKM-800 loader is worth mentioning separately, since these are its qualities that are especially attractive when it is necessary to carry out work in small or indoor spaces, where the use of large equipment is impossible or is considered irrational.

Peculiarities

What does the abbreviation MKSM stand for? This stands for: “Multi-Purpose Municipal Construction Vehicle.” The number 800 included in the model name indicates the carrying capacity and the maximum capabilities of this equipment.

In addition to the bucket, the basic loading configuration, about twenty other devices and auxiliary parts can be installed on the MKSM mini-loader. This transformation takes place quite quickly; the new equipment is connected to the machine’s hydraulic system and is immediately ready for work. Due to such a complete set of accessories, this mini loader has gained a reputation as a multifunctional machine.

The equipment is easy to maneuver and easy to control, a smooth ride, as well as an almost complete turn around its axis, the machine is provided by a volumetric hydraulic drive and two-sided continuously variable gearboxes.

The machine itself, as well as the attached loading equipment, is controlled by the driver-operator from the cab. To carry out control, there are a pair of joystick levers equipped with a mechanical and electrical drive.

The operator's cabin is designed for comfortable work at different times of the year and in different conditions: an almost all-round view allows the operator to control the situation around him during the work process, and the heating of the cabin and the air conditioning system in it make the machine suitable for year-round use.

In case of poor road conditions (off-road, viscous deep mud, etc.), you can install a provided by the design rubber-metal tracks. Thus, the machine evenly distributes the load on the ground and increases its traction and grip capabilities.

The small size and weight of this loader model make it possible, if necessary, to deliver it to the site of upcoming work using other large-sized cargo equipment.

Technical specifications

Engine characteristics

MKSM loaders are equipped with various diesel engines imported from the USA, Japan and Germany. They vary in power, have a different cooling system and a different number of cylinders. All these differences determine the modification of the loader.

Performance characteristics

MKSM loaders, regardless of the model subtype, have a bucket in their arsenal and have the same load capacity, however, the method of controlling the hydraulic system, the speed of the machine and the traction force of the loader vary depending on the modification.

Options	Modifications of MKSM
	800	800k	800H	800A	800A-1
Max. travel speed, km/h	10			18	12
Max. weight of the lifted load, tons	0.8
Max traction force, kN	24	21	28	25	27
Basic bucket capacity, m 3	0.46
Basic bucket width, cm	173.0
Max. bucket unloading height, m	2.41
Max. boom radius, cm	64.0
Drive unit	mechanical			electric	mechanical

Types of attachments

The main loading bucket, which is equipped with all types of MKSM loader, can be easily replaced with any other attachments in the arsenal of this mini-machine, namely:

Quarry bucket. For working with non-flowing and coarse-grained materials (crushed stone, stones, construction waste, etc.), and has a bucket volume of almost 0.5 cubic meters and a width of 173 cm. Equipped with special teeth on the edge.

Bulldozer rotary blade. Used for cleaning winter roads from snow, debris sites, for soil leveling, filling and leveling holes. Its width is 220 cm.

Bucket excavator. It is used for excavating small soil layers: trenches, holes, ditches, etc. Its capacity is 0.08 cubic meters, it rises to a height of 2 meters and goes deep to a depth of 2.4 m.

Trench excavator. It has a narrower specialization than the previous one, and is used for digging trenches necessary for laying cables, pipes and other communication units. Digs a trench with a maximum depth of 1 m, its width is 0.16 m, and works at a speed of 3.8 m/h.

Load forks. They are used during the storage of any stackable goods, for example, wooden pallets with construction or other goods during work in a warehouse, construction site or terminals. The working width varies from 23 cm to more than one and a half meters, and lifts to a height of 3.06 m.

Pressing forks. Used for collecting, loading and local movement of bulky and long waste, for example, construction waste (boards, beams, etc.), tree branches, bales or stacks of hay and straw, etc. They capture 162 cm and lift to a height of 3.01 m.

Weight pin. Used for moving or loading rolled materials: paper, wire, textiles, etc. The pin is 98 cm long and rises to a height of 3 m.

Load boom. With the same technical data as the pin, used for loading and unloading, lifting or transporting particularly heavy loads (up to 800 kg), a lifting hook is used to complete the task.

Drilling equipment. It is used for drilling wells in the ground, with different diameters and depths (20-40 cm in diameter and up to 2 m in depth), which can be used for a wide variety of work: from landscaping areas to constructing foundations and supports.

Hydraulic hammer. Used for crushing. With an impact force of 480 J, it breaks rocks and stones, concrete slabs and old asphalt, etc.

Road brush. Street cleaning. The tank contains 200 liters of water, and the brush covers 155 cm of surface.

Cleaning machine. Performs similar functions as a brush, but without the use of water and with the ability to reach hard-to-reach places, for example, a line near the curb, fences, etc. Coverage of the area during cleaning - 2 m.

Spreader with hopper. Used for sprinkling slippery roads. The volume of the bunker is 0.4 cubic meters, scatters at a distance of 3-16 m.

Rotary milling snow blower. Clears and discards snow cover from the treated surface. Captures 172 cm and throws 5 m.

Concrete mixer. It is used for mixing concrete mixtures directly on the construction site. Volume – 250 l.

Ripper. It is used during sowing, when landscaping lawns, when planning compacted soil as preparation, etc.

The MKSM-800 loader is a multi-purpose special equipment that is used in warehouses, construction work, and public utilities. The functionality of the forklift depends on attachments.

Despite its enormous capabilities, MKSM-800 has small dimensions, which allows you to move the loader from object to object to truck and ensures uninterrupted operation in narrow warehouse aisles. The loader can enter the room through a gate measuring 2.1 meters in height and 1.8 meters, and a volumetric hydraulic drive, which makes it possible to steplessly change the rotation speed of the right and left gearboxes independently of each other, can deploy the MKSM-800 on the spot, which makes it an excellent assistant for working in a warehouse.

The designers did everything for driver comfort. So in the loader cabin there are two hangers for outerwear, a box with necessary tool, and the presence of vents, heating and thermal insulation will maintain a favorable temperature regime In any weather. All main components of MKSM-800 are located in easily accessible places. For example, if there is a need for preventive maintenance or inspection of the engine, you just need to open the rear hood, and for the same actions with the hydraulic system, you just need to raise and fix the cab.

Depending on the model, the loader is equipped various engines. If this is a CUMMINS A2300 motor, made in the USA, then it gets the “K” model name and is called MKSM-800K. And when they install German engine HATZ 3M41, then MKSM-800N. To change the functional purpose of the loader, the following attachments are available: forks, snow blowers, road brushes, trench excavator, harvester, load boom, drilling equipment, tracks, etc.

1 – hydraulic tank; 2 – capacitor; 3 – frame; 4 – cabin heater; 5 – block electronic control; 6 – freon pipelines with a receiver; 7 – evaporator; 8 – boom; 9 – cabin; 10 – electric control joystick; 11 – main bucket; 12 – wheel; 13 – wing; 14 - accumulator battery; 15 – final drive chain drive; 16 – hydraulic system; 17 – friction clutch of the pump drive; 18 – fuel tank; 19 – engine; 20 – radiator block; 21 – air conditioning compressor/

dimensions

Cabin

The cabin is the operator's workplace. It contains all controls and display systems to ensure proper working conditions for the operator. It is installed on chassis 1 using silent blocks 5 in the front part and conical supports 2 in the rear part.

Controls

1 – friction clutch control pedal; 2 – fuel pedal; 3 – fuel supply lever.

Hydraulic system

The hydraulic system serves to drive the working equipment of the machine, replaceable
attachments and ensuring the movement of the machine. The hydraulic system consists of two circuits:

— contours of working equipment;

— the contour of the running mechanism.

1 – hydraulic motor; 2 – hydraulic pump; 3 – hydraulic distributor; 4 – equalization valve; 5 – boom hydraulic cylinder; 6 – mesh filter; 7 – filler cap; 8 – filler neck; 9 – drain filter; 10, 16, 17 – quick-release connection; 11 – oil level sensor; 12 – hydraulic tank; 13 – drain plug; 14 – speed change valve; 15 – bucket hydraulic cylinder; 18 – pressure filter.

Technical characteristics of the MKSM-800 loader

COMMON DATA
PARAMETER	MKSM-800
Theoretical working cycle of loading with a bucket, s, no more	12
Operating weight with main bucket, kg	3245
Transport weight with main bucket, kg	3100
Gross vehicle weight, kg	4045
Hydraulic system pressure: — chassis, mPa — working equipment, mPa	up to 350 up to 200
Hydraulic system performance: — chassis, l/min — working equipment, l/min — working equipment with additional pump, l/min	49 70 110
Maximum speed movement, km/h, not less	18
Maximum static tipping load, N	16000
ENGINE
Brand	Cummins A2300
Type	diesel, four-stroke, four-cylinder liquid cooled
Rated power at rated speed crankshaft engine, kW, (hp)	35,2 (48)
Specific fuel consumption at rated speed engine crankshaft, g/kW×h (g/hp×h)	253 (186)
Maximum engine speed	2800
Minimum engine speed at idle, rpm	800
POWER TRAIN
Transmission (Japan)	chain drive
Pumping unit (1 pc.) manufactured by EATON (USA)	558AK00085A
Hydraulic motor with brake and drive sprocket (2 pcs.) manufactured by EATON (USA)	ADT31M24AA 208A0C
Hydraulic distributor manufactured by EATON (USA)	AR1708-097
Leveling valve made by EATON (USA)	39055-XXX
Speed ​​change valve made by EATON (USA)	HF54753-09
Valve for “High-Flow” function made by EATON (USA)	–
Tire	10.0/75 – 15.3 Model F-201 PR6 TU 2521-027-00148984-98
Rim size	9,0 – 15,3
Air pressure in tires, kPa (kgf/cm2)	240 ± 25 (2.4 ± 0.25)
Tires suitable for working on soil with low load-bearing capacity
Electrical equipment
Electrical equipment rated voltage, V	12
Grounded	on the body
Rechargeable battery (2 pcs.)	6ST-90A or 6ST-90AP
Voltage, V	12
Capacity, A. h	90
Generator	comes with engine
Rated voltage, V	14
Maximum current, A	45
Starter	comes with engine
power, kWt	2,2
Voltage, V	12
WIPER
Electric gear motor (2 pcs.)	476.3730
Electric washer (2 pcs.)	124.5208
LIGHTING DEVICES
Front road headlight
Left (1 pc.)	05.0895.0000 LH RHD
Right (1 piece)	05.0894.0000 RH RHD
Left (1 pc.)	05.1101.000 LH
Right (1 piece)	05.1102.000 RH
Rear working light (1 pc.)	05.1102.000 RH
Ceiling lamp	BAAF.453754.001
LIGHT AND TRAFFIC SIGNALING DEVICES
Back lamp
Left (1 piece)	02.1244.0000 LH
Right (1 piece)	02.1245.0000 RH
Sound signaling device (2 pcs.)	201.3721-01
Signal flashing beacon (1 pc.)	"Agent-12U" AG 11.000
CONTROL AND MEASURING INSTRUMENTS
Operating time counter	SVN2-01-3.1
Hydraulic oil pressure switch	K4-SP-C-F-3/10U/P1
Engine Coolant Temperature Sensor	2М02В003
Coolant temperature gauge receiver engine	U06620028
Engine oil pressure sensor	comes with engine
Fuel gauge sensor	DT7.3-900
Fuel gauge receiver	U06620021
Hydraulic oil temperature sensor	2М02В003
Hydraulic oil temperature gauge receiver	U06620035
Drain oil filter clogging sensor hydraulic systems	comes with filter
Pressure oil filter clogging sensor hydraulic systems	comes with filter
Hydraulic oil level sensor	LVE 3
VOLUME OF FILLED LIQUID BY SYSTEMS, l, not less than:
Cooling system	12
Crankcase	6,5
Fuel tank	75
Hydraulic system	75
Final drives	2x9

Video review of the MKSM-800 loader

Loader MKSM-800

Mini loader MKSM-800(multi-purpose municipal construction vehicle) is used for loading and transporting soil and bulk rocks, territory planning, snow removal and garbage collection, digging holes and trenches, and borehole drilling.

Most often MKSM-800 is used in industrial, construction, municipal and road works ah, as well as in other industries where cramped conditions do not allow the use of large equipment.

High degree of compactness and excellent handling allow use in cramped conditions. The overall dimensions of the machine make it possible to penetrate openings with a height of 2.1 m and a width of 1.8 m. MKSM-800 is most effective when caring for sidewalks, pedestrian paths, alleys, markets, and carrying out landscaping and road work. Light weight and dimensions the loader allows it to be transported in a truck or trailer.

MKSM-800 smoothly changes speed and turns on the spot thanks to stepless gear shifting in the right and left gearboxes using a volumetric hydraulic drive. Movement control is carried out by two joysticks installed in the side panels.

The main advantage is the versatility of the machine, provided by a variety of quick-change attachments. Changing attachments is so easy that the operator can do it himself, without draining the machine and attachment hydraulic systems working fluid connected via a quick-release coupling.

Advantages of the MKSM-800 loader before analogues:

• small overall dimensions, high controllability and maneuverability;
• a wide range of attachments for carrying out various works;
• the machine and attachments are controlled using joysticks;
• economical diesel engine with liquid or air cooling;
• volumetric hydraulic drive, providing a smooth change in the speed of rotation of the final drives;
• it is possible to use hydraulic equipment;
• electric or mechanical control;
• ease of maintenance and repair.

Mini loaders MKSM-800 are produced in two modifications, differing in the models of installed diesel engines: equipped with diesel engine A2300 manufactured by the American company Cummins, with a Hatz 3M41 engine (Germany).

In the fall of 2011, a new modernization of the MKSM mini loader was tested, which received the name MKSM-800A. Distinctive Features loaders from new series are a welded frame, including chain gearboxes and tanks, the gear drive of the pump has been removed (the hydraulic pump is installed directly on the clutch housing), and an equalization valve has been used instead of the eliminated rod with levers. Imported chain gearboxes are used along with two high-speed hydraulic motors. To ensure better starting of the mini loader when low temperatures A clutch is installed between the American-made Cummins engine and the hydraulic pumps.

Specifications:

Name	MKSM-800K	MKSM-800N	MKSM-800A
Engine
Engine model	Cummins A2300	Hatz 3M41	Cummins A2300
Cooling system	liquid	air	liquid
Power, hp	44	52,9	48
Dimensions and weight
Operating weight, kg	2800		3100
Track width no more than, mm	1410		1450
Minimum turning radius, mm	2440
Ground clearance not less than, mm	206
Overall dimensions, mm - length - width - height	2480 1680 2065		2645 1720 2055
Performance characteristics
Maximum load capacity, kg	800
Maximum speed not less than, km/h	10		18
Passage angle no more than, degrees. - front - rear	13 23		13 27
Maximum static tipping load, kN	16
Hydraulic control type	mechanical		electric

Video:

MKSM 800 – loading device from Russian plant, widely known as a manufacturer of affordable material handling equipment. The model under consideration is a multi-purpose municipal construction machine designed for a wide range of tasks, despite its compact dimensions. This device, like many other representatives model range MKSM has successfully passed all factory endurance tests, and is adapted primarily to harsh climatic conditions - for example, to work in the northern regions of Russia. The machine is also suitable for working in conditions of elevated temperatures. Users highly appreciated the advantages of this model presented in this article. The main parameters, operating features and cost of the MKSM 800 mini-loader are also considered.

Purpose

MKSM-800 is widely used in operations where it is necessary to quickly and efficiently load and transport soil and other bulk materials, as well as various concrete structures. The machine also excels at drilling wells, digging trenches, as well as cleaning sidewalks, squares, parks and industrial areas, urban and country roads. The device removes debris, dust, freshly fallen and compacted snowdrifts from the surface. Due to its compact dimensions, the machine is in high demand in closed warehouses, as well as in hard-to-reach conditions – where increased maneuverability is required. Loading and unloading, as well as transportation and cleaning - all these and many other tasks can be assigned to the MKSM-800, equipping it with the necessary attachments.

Video

Attachments

• Cap caterpillars - this device helps well in situations where it is necessary to drive through a complex off-road obstacle - a rut, a hole, muddy ground, a rise, etc. In addition to improving cross-country ability, the tracks help reduce pressure on the ground. Cap caterpillars do not require professional skills when installing or dismantling them.

• Solid wheels are one of the more affordable alternatives to slip-on tracks and are an ideal replacement standard wheels. The advantage of solid wheels is their deep tread and tenacious properties. With such tires, slipping and slipping are practically eliminated. Thick rubber increases the weight of the mini loader, and at the same time increases its load capacity.
• Backhoe Mount – Converts a skid steer into a full-fledged mini excavator with hydraulic steering. It mounts All-Tach like any other attachment.
• A snow removal bucket is a device for removing snow drifts and snowdrifts. Suitable for cleaning loose and dry snowdrifts, as well as compacted or wet snow. There are certain versions of the bucket, depending on the volume - up to 1.5 cubic meters. m.
• Jaw bucket - is a structure of two working “jaws” that close together, thus ensuring tight retention of the load so that it does not fall out during transportation. In particular, foliage, soil, sand and other bulk materials can be loaded into such a bucket.
• A concrete mixing bucket is a device for quickly preparing concrete mixture, as well as other additional additives that improve the quality of asphalt pavement. Loading of material into the bucket is carried out manually or by scooping the mixture from the ground, and for unloading, a lower unloading hatch is used, to which a drain hose is attached, ensuring ease of unloading. This device has proven itself in construction and road repair, as well as in agriculture.
• A brush is a popular attachment for municipal services, with which you can quickly remove small debris, fallen leaves, sand, dust, etc. This option is well suited for sidewalks, road areas and public places with large crowds of people, as well as cleaning city and country roads, parks and parking areas.
• A rotary mower is an attachment for leveling the surface. For example, it is perfect for mowing grass and unnecessary green spaces - weeds, bushes and other thickets. Of course, a rotary mower copes with weeds and overgrown grass much faster than in the case of a manual mower.
• A mounted asphalt paver is an option for laying asphalt, distributing concrete material, filling trenches, etc. You cannot do without this option when building urban, suburban and even international transport interchanges.
• A cultivator designed for the following operations with soil: planting lawns and other herbaceous vegetation. The cultivator is capable of working at a depth of up to 155 mm.
• A mounted/dozer blade capable of turning a MKSM loader into a full-fledged mini-bulldozer. This is a convenient device for working with large volumes of snowdrifts, as well as debris, dust, and leaves. In fact, a bulldozer blade can replace heavier and larger narrow-profile machines that are not capable of working in difficult-to-reach conditions.
• Tree transplanter – means for solving a wide variety of problems, which include transplanting trees from one place to another. The equipment is equipped with special knives that are immersed in the soil in such a way as not to damage the root system of the tree. Thus, the tree will remain intact and intact after the work associated with its digging, packaging and transplantation from one place to another.
• Log grabber – a device for grabbing logs and other cylindrical objects. The grip holds the logs firmly so that they do not fall out during transportation. The maximum load capacity of the log grabber is 1 ton.
• A snow blower is an attachment for working with snow layers with a height of up to 740-750 mm. At the same time, the snow throw range can be increased to 6 meters. The snow thrower is equipped with a special plate that prevents clogging with sticky snow.

Device Features

• The MKSM-800 mini-loader is capable of turning around in one place. A smooth increase in speed is possible, without various jerks and vibrations. Operations with the control of the loader are easy and do not require getting used to, because only a pair of joysticks located on the side panels are provided to control the attachments.
• The machine exists in several versions. Thus, the 800K modification is equipped with a choice of diesel engines Cummins or John Deere, while the version with the “H” index received a motor from the Harz company. Today there are more than a new version A with design changes, including a durable welded frame. The developers also abandoned the installation of an outdated pump drive. The kit includes a clutch that helps reliable operation engine at sub-zero temperature loads.

• The standard model MKSM-800 received an economical power unit with specific fuel consumption of 220 kW/hour. You can choose from motors from John companies Deere and Harz, which have proven themselves well in harsh northern conditions. They are capable of operating at temperatures from minus 20 to plus 50 degrees. The service life of both engines is 8000 hours. The maximum speed is 10 km/h and the capacity fuel tank reaches 55 liters. The machine turned out to be compact - its length is 2480 mm and its width is 1680 mm.
• Otherwise, the mini loader of the same name is equipped with domestic components. For example, hydraulic system for the MKSM-800 model it is produced in Kovrov, Salavat and Pargolovo. You can change the necessary attachments in a matter of minutes - a quick-release clamp is used as fastenings. As a result, there is no need to use special tools.

• The all-metal cabin of the MKSM-800 is made of thick steel. Rigid fastening of the cabin to the frame is provided by silent block connections. If necessary, the cabin tilts back, and thus provides access to components and assemblies that are easy and convenient to service. The cabin itself is designed in an ergonomic way - for example, there is a wide doorway, as well as an additional step that allows you to easily climb into the cabin. The door is essentially the front wall of the cabin, and the side panels have hooks on which you can hang clothes. main feature interior decoration the cabin is, of course, a sprung chair. It can be adjusted in different ranges - however, the same applies to the adjustable steering column. All control devices, including control and measuring sensors and instruments, are located as close as possible to the driver. The cabin also has a special niche for storing tools. The front glazing area is expanded by side glazing, which provides almost all-round visibility. We also note modern sound insulation engine compartment and interior, thanks to which the driver is almost not distracted by noise and vibrations, gets less tired and can work much longer. Windows and doors can be replaced with protective grilles to lighten the overall weight of the cabin. At the same time, safety can be increased in this way, as safety bars protect the operator in the event of a rollover.

Specifications

• Load capacity/total weight – 800/2800 kg
• Engine name – 5201.22
• Engine parameters - diesel, 3 cylinders, 46 l. pp., developer – Zetor
• Speed ​​– 10 km/h (maximum)
• Ground clearance – 205 mm
• Dimensions, mm: 3270/1680/2065
• The height of the bucket suspension point is 3060 mm
• Fuel tank capacity – 55 liters
• Unloading height – 2410 mm
• Front/rear track – 1410 mm
• Climbing angle – 13 degrees
• Turning radius – 2440 mm
• Seat – yes
• Working body/chassis – bucket/wheels.

Price

The average cost of a mini loader MKSM-800 per Russian market is 1 million 100 thousand rubles per copy in maintained condition.

Large and medium-sized forklifts are used subject to certain conditions. If the working area is limited, you should get a small loader MKSM-800. When choosing this particular technique, you will not go wrong in any of its aspects. It pays due attention to turning radius, loadability, speed, stability and much, much more. Operational capabilities are taken into account - optimal height, high climbability. Working with this equipment will not cause any trouble for either the operator or the owner; in other words, it is convenient in terms of operation and economical in terms of operation.

If you are looking for an inexpensive and universal loader, then the MKSM-800 is what you need. Small dimensions and a wide range of attachments - all this will allow you to perform a wide variety of operations. Already, most entrepreneurs have given preference to this technology. Capabilities MKSM-800 allow you to work in confined spaces, without reducing productivity, since it has a zero turning radius, the MKSM-800 loader turns on the spot. Due to the efficiency in fuel consumption and the reliability of components, the MKSM-800 loader requires a minimum of operating costs.

Loader Productivity MKSM-800 is determined by the presence of quick-release connections and the possibility of aggregation with seventeen attachments for various purposes. Due to them, it can be used in very wide range areas, performing a wide variety of functions. This eliminates equipment downtime associated with seasonal work. The change of working parts is carried out by the operator without draining the working fluids; the presence of filters prevents contamination.

Accuracy of operations on MKSM-800 is determined by two joystick-type servo control handles located in the “easy access” zone, they guarantee measured movement, timely maneuver, sufficient sharpness and sensitivity of control. Smooth changes in direction of movement, soft acceleration, and excellent shock absorption will allow you to perform work that requires special delicacy.

With all the above advantages, do not forget that the only one MKSM-800 capable of loading and moving soil, bulk rocks, and lump materials. Its capabilities include planning areas of the area, cleaning areas from snow and debris. The MKSM-800 loader is used for transport and warehouse work with piece cargo, digging holes and trenches, drilling wells, preparing mobile concrete mixtures and other work performed using appropriate replaceable attachments. Due to its low weight, it is able to perform work on soils with low bearing capacity.

It is worth noting that the price of MKSM-800 is comparatively less than that of similar equipment from foreign manufacturers. Thus, for the most productive use of warehouse space, working in cramped spaces and performing functions in many areas of activity, use MKSM-800. MKSM-800 Its sale can be carried out with delivery to any region of Russia. In order to buy contact our company. Our phone number and email address are located in the “Contacts” section. By calling or writing to us, you can ask any questions you are interested in regarding the configuration and technical equipment