Even having a very small summer cottage or garden, sometimes it is simply impossible to do without mechanical assistance in the form of a walk-behind tractor or a mini tractor. This unit will be able to optimize many processes for the care of the site, and attachments, which are widely available on the modern market, can significantly expand the scope of its application. This article is devoted to an overview and principles for choosing attachments that will help you mechanize many agricultural works.

Types and purpose

There are several types of attachments for mini tractors, which, for greater convenience, can be grouped according to their areas of application in various aspects of human life. There are also universal devices that are necessary for almost every owner of such a unit, to which it is worth, first of all, to include a trailer and a loader.

In agriculture

Agriculture is an area in which various mechanical units are often used and, accordingly, attachments are used most often here.

Did you know? Farming equipment has long been treated with great respect. In the Middle Ages, theft of a plow was punished by wheeling.

Such devices include plows, harrows, various automatic devices for sowing the soil and planting plants, aggregates for harvesting, for watering and spraying, as well as various trailers, loaders and mouldboards. Below we will consider in more detail the use of all these units in this sphere of life.

In construction

Attachments such as blades, backhoe buckets, drills, trenching attachments and rippers make mini tractors very useful for digging trenches and holes for building foundations, as well as for digging cesspools, cattle burial grounds and other depressions in the ground, the width of which is significantly measure must exceed their depth.

Loaders, winches, buckets with loading platforms, cargo tractor carts, fork pallets allow builders to easily and quickly move various loads around the construction site - both small-sized and quite large and heavy. In addition, some of the above devices also allow you to lift loads to a small height.

Communal sphere

For the municipal sector, the most important attachments are shovels, mouldboards, sprayers, asphalt brushes, chemical and sand spreaders, snow cutters, buckets, snow throwers, snow plows and front loaders.

With the help of such an arsenal, public utilities workers can resist snow drifts on roads and sidewalks, fight ice, clean streets from dust and small particles that have settled, clean paving slabs and roadways, and also clean up a variety of garbage - like household, accumulated in a small amount, and large quantities of construction waste.

Did you know? Most small tractor, which can be set in motion, is the size of a pinhead and is located in the Yerevan Museum of Folk Art.

animal husbandry

In the livestock sector, it is very difficult to find a worthy application for attachments of mini tractors, since all work involves interaction with living organisms, which it is desirable not to physically injure during its implementation. Therefore, the most commonly used units in this area are buckets, trailers, loaders and blades.

With the help of these devices in animal husbandry, a rather narrow and specific list of works is performed, for example, cleaning livestock buildings from feces, transporting feed, animals or their meat, digging ditches and cesspools, and in very rare cases (this requires a rather serious qualification of a mini tractor operator) animal feeding.

Agricultural use

As already noted, agriculture is the area where attachments are most widely used, so we pay attention in this article to devices designed for it. Below you will find an overview of the most popular and useful implements used for agro-technical tillage and plants.

Soil preparation and cultivation

For the purpose of preparing and cultivating the soil, several units that are fundamentally different in their functionality are used:

The plow is used exclusively for the purpose of plowing the land, and in view of the fact that it is rather deeply immersed in the soil with its blades, for its comfortable and efficient use it is necessary to have a mini tractor with a power of at least 24 Horse power s, for example, Xingtai 244.

Important! In order to save time spent plowing and/or loosening, it is recommended to work in the direction of the longest section of your site. So you will spend less time on inefficient turns of the mini tractor and equipment.

Harrows, cultivators and rototillers are used to loosen the soil, and sometimes to remove weeds and level the upcoming planting site for cultivated plants.

By default, any mini tractor should cope with these units, however, harrows are very often very wide, sometimes they can reach up to 400 centimeters. To use such large attachments, you must have a machine with at least 14-15 horsepower, such as DW 150RXi, Forte 151 EL-HT Lux or Claus LX 155.
Mowers are most often used on soil that is yet to be turned into a field, to clear it of a variety of tall weeds, as well as small bushes. Absolutely any mini tractor is suitable for working with the mower, the only condition for its adequate operation is the obligatory connection to the machine's battery.

Landing equipment

Most often, when they talk about planting crops with the help of such aggregates, they mean planting vegetable crops, but it should immediately be noted that with the help of attachments, you can also plant crops, legumes, and corn.

Here is a list of the most popular equipment:

The principle of planting vegetable crops is that from a common reservoir with a huge amount of planting material, vegetables are fed to different furrows through special tubes, which, after they enter the soil, are immediately sprinkled with earth. To work with such equipment, it is desirable to have a tractor that would be equipped with an engine with a capacity of 15 horsepower or more.

Seeders, in general, work on the same principle as vegetable planters, only their tanks are much smaller, and instead of tubes through which vegetables enter, they are equipped with special nets moving in different directions in the direction of the minitractor.

When there is a coincidence of cells placed on different grids, a portion of grain falls out of the tank, which is sprinkled with earth. Adequate operation of such a seeder can be provided by a mini tractor with a capacity of 15 horsepower or more.

Video: grain seeder at work

Planting maintenance

In order to maintain plantings in agricultural technology, the following attachments are used:

A weeder cultivator is used to loosen the soil, allowing oxygen to the roots of plants, destroy weeds and increase the beneficial effect of fertilizers that are applied under plants using the second type of attachment from this list - a fertilizer hopper.

Some types of mini tractors allow you to use both of these types of attachments together, for example, Zubr 150 or Garden Scout T-15.

Watering and spraying

Alas, the minitractor is not able to provide decent watering for numerous plantings, so it is better to establish, for example, a drip irrigation system on your site.

However, this technique is quite capable of coping with spraying plants, for this purpose there are the following mounted units:

The principle of operation of both of these devices is generally the same, they differ only in the materials from which they are made. A chemical sprayer is capable of carrying and spraying various substances with which it is highly undesirable to treat plants at the same time as water, due to a possible chemical burn.

That is why it is recommended to keep two separate sprayers, or at least thoroughly wash the tank after chemicals and before spraying with water. You can use this device with absolutely any mini tractor.

Harvest

After the completion of all the main work, it is time to harvest, and here the following units will be extremely useful on the farm:

Equipment for different types vegetables works on the same principles, which can be mechanical, vibrational or conveyor. The main difference in them is the size of the cutter for digging, and the depth to which digging occurs. Any mini tractor is equally well suited for the use of such equipment.

Loader

V basic configuration absolutely any mini tractor has such attachments. It can be used to load and unload a variety of materials (fodder, building materials, etc.).
Its initial package includes a bucket (the average volume is 0.5-5 cubic meters) and an arrow (allows you to raise and lower the load horizontally). Instead of a bucket, a variety of other devices can be installed on the boom, for example, blades, crane hoists, forks, rippers and more.

This will help to significantly expand the functionality and usefulness of your mechanism. Maximum weight, which is able to lift an average mini tractor with a power of 15 horsepower on a loader - 1500 kilograms.

Trailer

Trailers, which are usually attached to the back of your car, may differ slightly in their functionality. For example, there are tipper trailers and flatbed trailers, single-axle and multi-axle, etc.

A tipper-type trailer is best suited for transporting any bulk cargo, and an onboard one is more profitable to use for transporting packaged cargo. The number of axles on the trailer is also extremely important, since it is proportional to the weight of the load that you can transport with it.
It is also important to understand that single-axle trailers are lighter and much more mobile and maneuverable than two- and three-axle trailers, which, in turn, are more stable and have more pronounced cross-country ability. The maximum weight that an average mini tractor can carry on a trailer is about 2000 kilograms.

How to choose attachments

When buying attachments, first of all, make sure that the material from which it is made corresponds to that declared by the seller. Carefully inspect the structure for mechanical damage and / or factory defects, pay special attention to that part of the equipment that is in direct contact with the ground.

Important! It is best not to do business with individuals and uncertified sellers, especially those who sell Chinese models of attachments. It often happens that after the purchase (especially for Chinese equipment) it turns out that this unit is designed to work only with one specific model of a mini tractor.

Video: attachments for mini tractors

When purchasing attachments, you must clearly understand what you will use it for, whether there is a need for such an acquisition, think about whether you can do without it, estimate the benefits that you will be able to derive from owning this unit.

As for the advice on choosing any specific types of attachments, first of all try to get extensions for the loader, a blade-dump and a trailer - these three units are responsible for most of all the work that can be done on a mini tractor. Moving on to the choice of more highly specialized equipment, do not hesitate to ask the opinions of more experienced farmers.

Pros and cons of homemade attachments

Of course, many owners of mini tractors are quite skillful and technically competent people, which in some cases allows them to manufacture attachments for their machines on their own, but this method of providing themselves with such units will not always benefit you.

First, let's give the arguments that make the production of home-made attachments expedient:

• often the cost of production is cheaper than buying a finished fixture;
• you will not be limited by the factory settings of the unit and the features of its basic settings;
• if the need arises, you can change the mount on your equipment and hang it on another mini tractor;
• you can always fix a broken part in the unit yourself.

Now as for the negative aspects of using homemade equipment:

• during its operation, damage to the mounts and other parts of the minitractor is possible;
• purchased attachments can sometimes be replaced under warranty, but self-made ones cannot;
• usually coefficient useful action purchased equipment is much higher than that of home-made;
• often home-made equipment breaks more often than purchased.

So, we hope that this article answered some of your questions about additional units with which you can expand the functionality of mini tractors.

Mechanization is the most important and most useful process that has replaced manual labor in all civilized countries for quite a long time, so do not be afraid of innovations and if you have the opportunity, then join the ranks of people who have optimized their work processes as soon as possible!

Was this article helpful?

Thank you for your opinion!

Write in the comments what questions you did not receive an answer to, we will definitely respond!

6 times already
helped

Any person always strives for convenience and comfort. Therefore, after 2-3 years of processing his site with a walk-behind tractor, which he has to follow, the owner has the idea of ​​\u200b\u200bcreating a mini-tractor. On it it is already possible not only to plow and sow, but also to carry loads, sitting in the cab and simply operating the levers.

From a walk-behind tractor

This device is very convenient to use due to its small size and high maneuverability. In addition to large fields, it is used in small areas of the garden, as well as between buildings and trees, where a conventional tractor cannot turn around.

A reliable and long-tested option for creating a device is from a walk-behind tractor. And there are two ways: buy a ready-made adapter for a walk-behind tractor or make it yourself. It should be borne in mind that not every adaptive node is suitable for an existing walk-behind tractor. That is why most often they make it with their own hands. For this you need:

• Corner, pipe, channel and a sheet of metal 1.5-2 mm thick for the frame.
• Two wheels right size with axle.
• The seat, which is taken from the "Zhiguli" and remade.
• Drill, welding machine and locksmith tools.

Usually in household use . This unit is relatively inexpensive, has 4 forward and 2 reverse speeds, engine power is 6.5 hp. The weight of the walk-behind tractor is about 90 kg. To it, they easily make the necessary adapter together with a homemade plow. Its assembly is divided into several stages:

1. A frame is made from a corner, a channel and, if necessary, pipes are also used.
2. They put a steering column taken from the unusable Zhiguli and remade to the desired size.
3. Install and fasten the seat with bolts, selecting the optimal distance to the steering wheel.
4. Place the control levers: clutch, throttle valve, brakes.
5. Finished and painted.
6. They test the finished product and slightly adjust the assembled units.

It is desirable that the rear wheels are larger in diameter than the front ones. This increases the cross-country ability and gives a certain seriousness to a home-made unit.

In the event that the walk-behind tractor itself with the engine is behind the seat, the clutch of the leading rear wheels soil is better. This allows you to hang a double-furrow plow on the unit, which greatly increases productivity.

Manufacturing from improvised parts

There are times when the owner does not have a walk-behind tractor. But in the garage there are various spare parts and wheels from automotive and other equipment. Perhaps there is also a working engine, for example, from the Oka. Then the creation of a mini-tractor starts almost from scratch. And the masters who are engaged in homemade products know perfectly well where to get the necessary missing components and assemblies. This is auto analysis of foreign cars and domestic cars, which is in every city and village.

To begin with, they make a schematic drawing, on which they estimate the approximate location of the main nodes. Then a frame is made from a channel and the corners are reinforced sheet metal. Its width is determined by the size of the existing drive axle of the vehicle. The length of the frame depends on the engine to be installed, the location of the handlebar, seat and attachments.

Wheels, axles and steering completely taken from the car "Oka" or another. Bridges may not be shortened. When installing the engine, there is only one caveat. It is necessary to raise the motor so that the wheel clearance is greater. This will allow the tractor to work even in deep furrows.

An engine from a Ural or Dnepr motorcycle with a gearbox that has reverse speed is sometimes fitted to such a unit. But their motors are multi-turn, so you need to install an additional one to reduce the speed of the mini-tractor. After all, it is made to cultivate the land, and not to compete in Formula 1 races. The lower the speed of the unit, the greater the tractive effort. Every student knows this.

Homemade attachments

When the finished mini-tractor has passed all the tests, acquired the status of significance and earned the love of the whole family, the task of manufacturing attachments for it comes to the fore. And it depends on the intended crops and tillage. If a walk-behind tractor was used to create a tractor, then there is already a ready-made unit for coupling with agricultural equipment. In another case, you will have to make a hinge with your own hands, the photo of which is presented.

It shows that the design of the hitch is three-point. It must be movable both vertically and horizontally. It is made from steel profiles using a welding machine. Needed to connect the units.

Of course, it is possible to make a single-point hitch assembly, but this will greatly reduce the number of mounted agricultural processing machines, and therefore, reduce the versatility of the tractor.

There are several types of agricultural units for cultivating the land.

Types of plows

For homemade tractors The most commonly used types of plows are single-hull and double-hull. The former cling to light and medium walk-behind tractors, and the latter to more impressive equipment. For a mini tractor, if it has powerful engine and a decent weight, they prepare multi-hull ones that cling to a home-made hitch.

The plow is often made from a factory plow skimmer, which usually uses MTZ tractor. It is only necessary to slightly modify the plowshare and the correct bend of the blade. It is possible to use a horse plow.

For plowing heavy and hard lands, as well as soils with tree and shrub roots, self-made disk plows are used. They are a frame with sharp discs up to 40 cm in diameter, which cut into the soil at a slight angle relative to the direction of movement. This allows them not only to cut the roots, but also to loosen the ground.

Hillers and harrows

Any homemade hiller consists of a frame and two discs located at an angle to each other. Such a unit is used when hilling rows of potatoes and strawberries.

Harrows are designed to break up clods and loosen plowed land. They are a lattice frame 100 × 50 cm in size, welded from corners 50 × 50 mm, and sharp fingers up to 15 cm long, evenly spaced over the frame area. The harrows hook behind the plow and work together with it.

Potato planters and diggers

This trailed attachment is used for a specific crop - potatoes. It is driven from its own wheels, which allows you to evenly distribute the seeds along the furrow, and does not depend on slippage.

A potato digger is a sharp knife 20-30 cm wide, which horizontally enters the soil to a depth of 20-25 cm. Using an inclined grate, it pulls potatoes to the surface. At the same time, the tubers are cleared of earth and grass.

Other equipment

Depending on the purpose, other attachments can be used:

• Mounted mowers. Used for making hay for pets and removing weeds in the garden.
• Rake for raking mowed grass. They are mounted and trailed. Trailers have two wheels. Cling directly to the tractor.
• Mounted cultivators. They usually consist of a frame and 6-8 cultivator shares. The principle of operation is similar to that of a flat-cut plow. They have two wheels, with the help of which the depth of cultivation is regulated.
• Garden sprayers. This is the correct unit. They are sprayed with crops to protect against pests, and they also protect grain from weeds using special chemical compounds. Mainly used in farm fields.
• Bulldozer blades. They hitch in front of or behind the tractor. They are a shovel up to 1.5 m wide. They are made of steel 3-5 mm thick. Fastened with a hanging device. Designed for cleaning the area from snow and debris, as well as for planning the surface of the site.
• Kunas. This special device is used only for loading and unloading. It is made for a specific type of mini-tractor activity.
• Rotary brushes and snow blowers. They are especially needed in winter on city streets. A tractor with such equipment is able to clear all the bottlenecks between houses and shops where it is difficult for a conventional tractor to drive up.

Assembling a simple unit, as well as home-made attachments for a mini-tractor, does not present any particular problems. All it takes is time, desire, necessary tools and materials.

Modern tractors are used in almost all industries. However, these powerful and productive machines are useless without additional equipment. It is the mounted units that determine the scope of the equipment, ensure its performance and functionality.

This also applies to small modifications. It’s worth clarifying right away that mini-tractors are used mainly in agriculture and housing and communal services. Therefore, attachments for a mini-tractor can be divided into two groups. Let's get acquainted with each of the categories in more detail.

For the needs of public utilities

It is worth clarifying that mini-tractors are rarely used in construction and housing and communal services. The equipment simply does not have enough power to perform certain types of work. For example, the dismantling of asphalt pavements or the laying of utilities in frozen soil.

However, if the work does not require large traction efforts or large-sized equipment cannot cope with the tasks, mini-tractors take over.

Among the attachments that are used in construction and housing and communal services, the following units can be distinguished:

When performing work, it is necessary to select attachments in accordance with the traction force of the tractor. When using unsuitable devices, damage to the hydraulic system and the engine of the equipment is possible.

For agricultural activities

Modern farms focused on various fields of activity. In particular, farmers are engaged not only in planting and harvesting cultivated plants, but also in breeding cattle and poultry.

An integrated approach to business is the key to business prosperity. Accordingly, the mini-tractor must perform full cycle work: from pre-planting soil preparation to the preparation of vegetable feed for livestock.

Given this feature, the arsenal of a self-respecting farmer should include various categories of attachments. Here is what manufacturers offer for agricultural activities.

Plows for mini tractors

This equipment is designed for processing the topsoil. Please note that for small-sized equipment, mainly mounted plows are used: the weight of the equipment falls entirely on the tractor hitch.

By design features plows are divided into share, rotary and disc. The equipment is selected depending on the area of ​​the field and the complexity of the soil.

Rotary mower

Such units are suitable for working with tractors, whose power varies between 12-25 hp. With. The equipment is designed for mowing grass, chopping and laying the bevel into rolls or mowing.

Models on the market differ in device, method of aggregation to the tractor and performance. For mini-tractors, units are suitable, the frame of which consists of one or two bars with cutting elements installed on them.

The force required to operate the mower is transmitted through the power take-off shaft or wheel chassis drive. The best option will use a baler with the mower, which will form the bevel into rolls, facilitating subsequent transportation and storage.

These products simplify the process of planting potatoes, reducing human intervention to a minimum. The machine consists of independent wheel base, steel frame, furrow coulters and seed hopper.

Please note that almost all models can apply fertilizer to the beds and close the furrow using special discs.

It is worth noting that a potato digger is used for harvesting. This unit is also attached to the rear hitch of a mini-tractor, providing not only the extraction of tubers, but also the cleaning of potatoes from tops and soil residues.

According to the principle of operation, potato diggers are divided into conveyor and vibration (screen) models.

soil cutter

The main purpose of this category of attachments is preplant soil preparation. In particular, during operation, the upper layer of the soil is loosened, with simultaneous grinding of the remains of weeds.

Please note that rototillers are not used in areas with a lot of stones and tree rhizomes.

Cultivator

In addition to planting agricultural crops, plants need care at all stages of growth. For example, to get a bountiful harvest, you need to process the aisles, do mulching and weeding.

On the farms of many farmers and summer residents, you can see equipment made with my own hands. Similar units were made according to the drawings drawn up by them, because they know everything about the features of the soil, as well as what requirements must be taken into account for the units themselves. Such equipment, if done correctly, can last a long time, doing all the necessary work.

Pros and cons of homemade designs

Of the advantages of self-assembled technology, the following points can be noted:

• even a person with low qualifications can make attachments;
• any mounted unit made in artisanal conditions costs quite inexpensively;
• to create equipment and repair it, you will need a standard set of tools;
• it is possible to enhance certain features of the device;
• in terms of safety, attachments can be built to a very high standard.

Among the shortcomings, the following criteria stand out:

• setup and maintenance homemade technology- this is a painstaking labor-intensive process that requires skill and proper qualifications from the owner;
• throughout the entire service life is required with special attention monitor the operation of the unit.

Attachment manufacturing

Attachments are divided into the following types:

• to prepare the soil for planting crops;
• for harvesting and processing crops.

Before mounting equipment on a mini-tractor, drawing up drawings, sizing, you should understand:

• construction type;
• features of the operation of equipment (advantages and disadvantages);
• cash and energy costs.

We can single out the most popular attachments of farmers, which are assembled by hand:

1. plow- designed to prepare the soil for sowing (usually it is connected to the rear suspension);
2. harrows- provide soil preparation;
3. potato planter- works with engines that have a capacity of more than 23 liters. With.;
4. rake- an effective tool for cultivating the land, has a size of 1.2 to 3.2 meters, the engine power must be more than 14 liters. With.;
5. cultivator– provides proper care behind plants during the vegetative period;
6. sprayer- a device for processing agricultural areas with mineral fertilizers;
7. potato digger, conveyor digger- designed for harvesting root crops (rear suspension is required to work with this technique);
8. trailer equipment, automatic hitch– equipment is necessary for the transportation of various goods;
9. snow blower, snow blower, snow blower- units are used for clearing snow drifts in the cold season;
10. scythe, knife, cutter– tools for working with the earth;
11. manipulator- a mini-unit with a bulldozer blade, which can be equipped with a mounted excavator or loader.

Ladle

Especially in demand such devices:

• buckets:
• Kunas;
• snow shovels.

KUNs are very often performed in artisanal conditions, and in terms of quality they are in no way inferior to factory products. In the manufacture of a KUHN for a front-end unit or as attachments, diagrams and drawings will be required. You should also carefully calculate the performance characteristics of equipment, its carrying capacity.

Typically, such attachments are made of steel sheet 5 mm thick. To create a KUN, as well as a bucket or a shovel for snow removal, you will need the following tools:

• wire cutters;
• apparatus for welding;
• clamps;
• Workbench;
• pliers;
• hammer;
• turbine.

You will also need guides and supports, which are made from tubes with a diameter of 45 and 80 mm. Additionally, it is necessary to install a hydraulic booster - its diameter should be about 25 mm. To fix the perpendicular elements, another tube is welded to the front.

Creating a hinged node. An impeller with a circle of "10" is used to cut the pipe. To do this, it is necessary to implement a retreat from the edge in order to ensure the correct bending of the bucket. A profile is welded at the bottom of the pipe. Often there is a need to weld cross members, which will create an additional stiffness factor.

The bucket is fastened using an A-shaped element. Additionally, the node is fixed with longitudinal beams. A particularly important unit is the hydraulic lifting device.

In order for it to work without failures, all elements should be carefully adjusted. Only a highly qualified master can make a hydraulic lift on his own, so it is much easier to borrow a block from a semi-trailer 2 PTS-6. To fix the bucket, a suspension is required, which is mounted frontally.

Planter

Potato diggers are installed on a mini-tractor, which can spud up to 35 acres of land. In this configuration, only one conveyor and a capacity for 100 kg of potatoes are needed. Also, sometimes two-row units are used - they are suitable in format for powerful tractors. The planter (seeder) is made of a solid frame on which various blocks are mounted:

• axle with grouser (several pieces);
• gears (2 pcs.);
• conveyor;
• supply tubes.

Often, an additional plow clings to the frame to make a furrow into which the tubers are planted. Also, a disk hiller is attached to the back of the frame to sprinkle potatoes. If everything is correctly arranged, then the work process will occur automatically. To create a planter with your own hands, you will need the following elements:

• corner "4", a rectangular pipe is also suitable, the wall thickness of which should be at least 3 mm;
• axle with fixed bearings;
• two gears and a chain;
• conical container (PVC material can be used);
• steel wire;
• lugs (they can be made from gas cylinders).

Of the tools you will need:

• Bulgarian;
• disks;
• welding machine;
• drill;
• drill;
• screwdrivers.

First, a frame is created with a size of 65x35 cm. A pipe 45 mm thick is suitable for this. An axle with an “asterisk” is placed on it, which will become the main drive.

Grousers are cut out of gas cylinders (the cut goes in a circle) - thus, rings 7-12 cm wide are obtained. Hubs are welded on them, which are attached with studs.

The wheels are removable. Then a container is built - it can be made of PVC sheets or tin. One container can hold approximately a bag of potatoes (50 kg).

Then the conveyor is assembled. Here it is necessary to put a chain with cells no more than 6.5 cm.

Lift

Lifting various weights (up to 800 kg to a height of 3.5 meters) can be implemented using a mechanical device. In this case, you can use the "hydraulics" of the suspension.

The design is not laborious, but it is not always convenient to use it. You can make another lifting mechanism.

To make a lift, you will need the following components:

• corner "8";
• sheet steel (6 mm);
• jumper-corners "4";
• two scarves and eyelets.

A groove is made in the rear jumper - it is needed for fixation (it is equipped with a "triangle").

All elements are fastened, holes with a diameter of 24 mm are drilled for engagement. The arrow is fixed at the top point of the tip - thus, there is a lever that provides the lifting height.

The arrow is made from the corner "8". A channel is welded along the entire length as a fastener. All joints are reinforced with welded plates. The upper part is equipped with a hook-shaped toe that bends at an angle of 45 degrees. A ball joint is attached to the other end.

An additional guide is being made (65 mm). Holes (4-6 pcs.) are drilled along the length so that equipment can be fixed under different operating modes.

Hiller

The triple hiller is one of the most popular agricultural tools, which is practically not inferior in purpose to a plow or winch. It allows you to create furrows in which various crops are planted. Okuchnik moves along the beds, while his "wings" quickly pour soil into the holes in which potato seedlings are already located.

Okuchnik is the simplest tool in design, which has a single grip width, while it looks like two fastened and extended wings.

When working with a hiller, the width of the beds is adjusted to a specific tool, but not vice versa. Manufacturers make devices with a working width of 24-32 cm, which does not always meet the needs of household plots.

Okuchniki are divided into several types. The simplest and most popular of them is a hiller for a small area. Such a unit has a propeller type. It is put on a mini-tractor, which has forward and reverse gears.

The principle of operation is as follows: special propellers loosen the soil, weed weeds, then the beds are covered with thinned soil. Work takes place in second gear with a torque of up to 190 rpm.

To make the simplest hiller, you will need to use metal 3 mm thick. Fragments of the product are bent until the radii match. Then you should weld them 2-3 times. Seams are processed, protected in such a way that the surface is smooth. By the same method, "wings" are made.

Harrow

Prices from the manufacturer for harrows vary from 15 to 65 thousand rubles. For this reason, such a device is easier to make on your own, because it will cost several times cheaper, and it will perform the work no worse than the original version.

Before the land is plowed, it must be properly prepared. A disc harrow is best suited for this. The weight of the product ranges from 190 to 700 kg, the grip can be from 1 to 3 m. Several discs can be placed on the model, the tillage depth will be about 20 cm.

Harrows are divided into the following types:

• working from a rotor;
• disk;
• dental.

The first type removes the soil in layers, while the cut thickness can vary from 3 to 9 cm. This indicator can be controlled. It is also important to consider when designing a harrow the area of ​​​​the allotment on which you will have to work. The strip width varies from 750 to 1450 mm.

When properly designed, the blade has a sharp angle, which allows it to penetrate the soil with maximum momentum, cutting through it and destroying weed roots at the same time. A disc harrow is used on dry soils, and a special disk in the form of an asterisk loosens the soil in such an aggregate. There can be up to 5-7 similar disks on one shaft - it all depends on the power of the engine.

Sizes range from 20 to 40 mm. With the chassis, the coupling occurs either with the help of a spring strut or with the help of hinges.

The simplest harrow in design is a tooth harrow. It may be enough to cultivate the soil. By appearance it resembles a lattice with teeth. A good hook can be an ordinary beam with holes that fit into the tube of the towing unit, while the rod is fixed.

Between the hook and the chassis, after the unit is assembled, dynamic chains are welded.

The lattice is cooked from blocks or fittings. Sometimes pipes with a perpendicular section are used, while the walls must be at least 3.5 mm thick.

11.03.2014 09:07

With the help of various attachments, any tractor turns into a multifunctional machine capable of performing a wide range of various works. First of all, tractors with attachments are designed for tillage (plowing, cultivation, planting, harvesting, and much more) and various goods in the course of agricultural activities. In addition, attachments allow you to perform other tasks, including in utilities and construction companies. A set of attachments for one tractor makes it possible to replace several types of special equipment at once.

Types of attachments for a tractor

To date, attachments to the tractor are classified into several groups depending on the purpose:

tillage devices;

planting and sowing units;

equipment for fertilization and plant protection;

devices for harvesting and forage preparation;

post-harvest processing equipment, etc.;

In turn, each group of attachments is divided into several types depending on the principle of operation, the method of aggregation, the type of working bodies, and so on. Depending on the type of work performed, attachments can be universal (general purpose) or special.

Soil-cultivating attachments

In daily activities, attachments designed for tillage are most often used. Depending on the processing method, aggregates of basic, surface and special soil processing are distinguished.

The main processing equipment is plows and flat-cut cultivators. For surface treatment, cultivators, harrows, rollers and cultivators are used. Special attachments include plantation, disk, forestry, shrub-marsh and other types of plows.

Mounted plows are compact in size and are used for the main cultivation of relatively small plots of land. The main working bodies of the plow are the body, knife, skimmer and subsoiler. Depending on the number of buildings, one, two or multi-hull units are distinguished. Plows can be share, disc, rotary, deepening or chisel plows.

Mounted harrows are disc, tooth, needle, mesh, loop harrows and others. In turn, they can be light, medium and heavy. Harrows are used for loosening the upper layers of the soil, breaking up clods and soil crusts, destroying weeds, as well as planting fertilizers and seeds.

Mounted cultivators are made of share or disc type. They provide loosening of the top layers of the earth, crushing of the remains of plants and their incorporation into the soil. Plowshare units allow you to cultivate the soil to a depth of 50-110 mm, and disk units, respectively, 40-100 mm.

Mounted cultivators are classified into two types: tilled or steam. Row devices are used for inter-row cultivation, and steam units provide continuous tillage. Cultivators allow loosening the top layer, destroying weeds, fertilizing, cutting irrigation furrows and hilling plants.