font size

UNIFIED TARIFF - QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS - ISSUE 2 - PART 2 - SECTIONS MECHANICAL PROCESSING ... Relevant in 2018

§ 101. CAR REPAIR MAN

Characteristics of works. Disassembly of diesel and special trucks and buses with a length of more than 9.5 m. Repair, assembly of trucks, except for special and diesel, cars, buses up to 9.5 m long. Repair and assembly of motorcycles, scooters and other motor vehicles. Execution of fastening work of threaded connections at maintenance with the replacement of worn parts. Maintenance: cutting, repair, assembly, adjustment and testing of aggregates, assemblies and devices of medium complexity. Dismantling of aggregates and electrical equipment of vehicles. Identification and elimination of malfunctions in the operation of units, mechanisms, devices of cars and buses. Connection and soldering of wires with devices and electrical equipment. Locksmith processing of parts according to 11 - 12 qualifications using universal devices. Repair and installation of complex units and assemblies under the guidance of a highly qualified locksmith.

Should know: the device and purpose of nodes, assemblies and devices of medium complexity; rules for assembling cars and motorcycles, repair of parts, assemblies, assemblies and devices; basic techniques for disassembling, assembling, removing and installing devices and electrical equipment; adjustment and fixing works; typical faults electrical equipment systems, methods for their detection and elimination, purpose and basic properties of materials used in the repair of electrical equipment; basic properties of metals; purpose of heat treatment of parts; the device of universal special adaptations and control - measuring tools; system of admissions and landings; quality and roughness parameters.

Work examples

1. Passenger cars, trucks, buses of all brands and types - removal and installation of gas tanks, crankcases, radiators, brake pedals, mufflers, replacement of springs.

2. Cardan shafts, brake drum trunnions - adjustment during assembly.

3. Fans - disassembly, repair, assembly.

4. Cylinder heads, cardan joints - check, fastening.

5. Cylinder heads of the dumping mechanism - removal, repair, installation.

6. Engines of all types, rear, front axles, gearboxes, except for automatic ones, clutches, cardan shafts - disassembly.

7. Contacts - soldering.

8. Wings of passenger cars - removal, installation.

9. Water pumps, oil pumps, fans, compressors - disassembly, repair, assembly.

10. Windings of insulating devices and electrical equipment - impregnation, drying.

11. Relays - regulators, ignition distributors - disassembly.

12. Valve seats - cone processing, lapping.

13. Headlights, ignition locks, signals - disassembly, repair, assembly.

Characteristics of works. Repair and assembly of diesel, special trucks, buses, motorcycles, imported cars, pickup trucks and minibuses. Dismantling, repair, assembly of complex units, units and devices and their replacement during maintenance. Running in cars and buses of all types at the stand. Identification and elimination of defects, malfunctions in the process of adjustment and testing of units, assemblies and devices. Disassembly of parts after disassembly and washing. Locksmith processing of parts according to 7 - 10 qualifications using universal devices. Static and dynamic balancing of parts and assemblies of complex configuration, drawing up defective lists.

Must know: arrangement and purpose of diesel and special trucks and buses; electrical and wiring diagrams cars; technical conditions for the assembly, repair and adjustment of units, components and devices; methods for identifying and ways to eliminate complex defects found in the process of repair, assembly and testing of units, assemblies and devices; rules and test regimes, specifications for testing and delivery of units and assemblies; purpose and rules for the use of complex test facilities; device, purpose and rules for the use of control and measuring instruments; design of universal and special devices; the frequency and volume of maintenance of electrical equipment and the main components and assemblies of vehicles; system of admissions and landings; qualifications and roughness parameters.

Work examples

1. Engine cylinder blocks - repair and assembly with a crank mechanism.

2. Camshafts - installation in the block.

3. Generators, stators, speedometers - disassembly.

4. Hydraulic lifts of the dumping mechanism - test.

5. Torque converters - inspection and disassembly.

6. Cylinder head diesel engine- assembly, repair, leak test, installation and fastening.

7. Engines of all types - repair, assembly.

8. Front wheels - adjustment of the angle of convergence.

9. Pads brake drums, shock absorbers, differentials - repair and assembly.

10. Compressors, brake valves - dismantling, repair, assembly, testing.

11. Automatic transmissions - disassembly.

12. Mechanical gearboxes - assembly, bench testing.

13. Dump truck bodies, dump truck mechanisms - installation, adjustment of lifting and lowering.

14. Front and rear clutch axles, cardan shafts - repair, assembly and adjustment.

15. Axles forward - check and editing under a press in a cold state.

16. Main bearings - replacement of liners, scraping, adjustment.

17. Pistons - selection by cylinders, assembly with connecting rods, change of piston rings.

18. Instruments and assemblies of electrical equipment are complex - check and adjustment during maintenance.

19. Reducers, differentials - repair, assembly, testing and installation in the crankcase rear axle.

20. Relay-regulators, ignition distributors - dismantling, repair.

21. Oil seal crankshafts, clutch hubs, steering ball pins, rotary cams - replacement.

22. Hydraulic and pneumatic brakes - disassembly.

23. Steering - repair, assembly, adjustment.

24. Connecting rods with pistons - check on the device.

25. Connecting rods - change of bushings in the upper head of the connecting rod with adjustment to the piston pin; final fitting on the necks crankshaft plumb in four positions.

26. Car electrical wires - installation according to the scheme.

APPROVE:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Car mechanic 5th category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of a car repairman of the 5th category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. A car repairman of the 5th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The 5th category car repairman belongs to the category of workers and reports to [position title of the immediate supervisor in the dative case] of the Company.

1.4. A person who has a vocational education, advanced training and at least 1 year of experience in the profession of a car repairman of the 4th category is appointed to the position of a car repairman of the 5th category.

1.5. A car mechanic of the 5th category must know:

• constructive arrangement of serviced cars and buses;
• technical conditions for the repair, assembly, testing and adjustment of complex units and electrical equipment;
• electrical and wiring diagrams of any complexity and the interaction of devices and units in them;
• causes of wear of mating parts and ways to identify and eliminate them;
• test bench setup.

1.6. In his activities, a car repairman of the 5th category is guided by:

• normative acts and methodological materials on the issues of the work performed;
• internal labor regulations;
• orders and orders of the head of the Company and the immediate supervisor;
• this job description;
• rules on labor protection, safety precautions, industrial sanitation and fire protection.

1.7. During the period of temporary absence of a car repairman of the 5th category, his duties are assigned to [deputy position].

2. Functional responsibilities

A car mechanic of the 5th category is obliged to perform the following labor functions:

2.1. Adjustment and testing on stands and chassis of complex units, components and devices of vehicles and their replacement during maintenance.

2.2. Checking parts and assemblies of electrical equipment on test equipment and test fixtures.

2.3. Installation of devices and units of electrical equipment according to the scheme, including them in the network.

2.4. Identification and elimination of complex defects and malfunctions in the process of repair, assembly and testing of units, components of vehicles and electrical equipment.

2.5. Complicated locksmith processing, fine-tuning of parts according to 6-7 qualifications.

2.6. Static and dynamic balancing of parts and assemblies of complex configuration.

2.7. Diagnostics and adjustment of systems and units of trucks, cars and buses that ensure traffic safety.

In case of official necessity, a 5th category car repairman may be involved in the performance of his official duties overtime, by decision of the immediate supervisor, in the manner prescribed by law.

3. Rights

A car repairman of the 5th category has the right to:

3.1. Give assignments to subordinate employees, tasks on a range of issues included in his functional duties.

3.2. Supervise the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.

3.3. Request and receive necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.

3.4. Interact with other services of the enterprise on production and other issues that are part of its functional responsibilities.

3.5. Get acquainted with the draft decisions of the enterprise's management regarding the activities of the Division.

3.6. To propose to the head of the proposal to improve the work related to the duties provided for in this Job Description.

3.7. Submit proposals for the consideration of the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.

3.8. Report to the manager about all identified violations and shortcomings in connection with the work performed.

4. Responsibility and performance evaluation

A car repairman of the 5th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, also criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of a car repairman of the 5th category is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of a car repairman of the 5th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of a 5th category car repairman is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, a car repairman of the 5th category can go on business trips (including local ones).

Familiarized with the instruction ___________ / ____________ / "____" _______ 20__

This job description has been developed and approved in accordance with the provisions of the Labor Code Russian Federation, Unified Tariff and Qualification Directory of Works and Professions of Workers Issue 2, approved. Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45, List of industries, workshops, professions and positions with harmful working conditions, work in which gives the right to additional leave and a shorter working day, approved. Decree of the USSR State Committee for Labor and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22, Model norms for the free issue of certified special clothing, special footwear and other personal protective equipment to workers in cross-cutting professions and positions in all sectors of the economy, employed in work with harmful and ( or) dangerous working conditions, as well as work performed in special temperature conditions or associated with pollution, approved. by order of the Ministry of Health and Social Development of the Russian Federation of October 1, 2008 N 541n, and other regulatory legal acts regulating labor relations.

1. General Provisions

1.1. The 5th category car repair mechanic belongs to the category of workers and reports directly to [name of the position of the immediate supervisor].

1.2. A person with a secondary vocational education and work experience in the specialty of at least [value] years is accepted for the position of a car repairman of the 5th category.

1.3. A car repairman of the 5th category is accepted and dismissed from work by order [the position of the head of the organization].

1.4. A car mechanic of the 5th category must know:

- basic methods for disassembling individual simple units;

- the purpose and rules for the use of the locksmith and instrumentation tools used;

- name and marking of metals, oils, fuel, brake fluid, detergent compositions;

- basic information about the structure of cars and motorcycles;

- the order of assembly of simple nodes;

- techniques and methods for cutting, splicing, insulating and soldering electrical wires;

- the main types of electrical and insulating materials, their properties and purpose;

- ways of performing fastening work and the scope of the first and second maintenance;

- the purpose and rules for the use of the most common universal and special devices and instrumentation;

— basic mechanical properties of processed materials;

— appointment and use of cooling and brake fluids, oils and fuels;

- purpose and basic properties of materials used in the repair of electrical equipment;

- rules for the use of pneumatic and power tools;

– fundamentals of electrical engineering and metal technology in the scope of the work performed;

- arrangement and purpose of nodes, assemblies and devices of medium complexity;

– arrangement and purpose of diesel and special trucks and buses;

– constructive arrangement of serviced cars and buses;

- Rules for the assembly of cars and motorcycles;

– electrical and wiring diagrams of cars;

— repair of details, knots, units and devices;

- basic techniques for disassembling, assembling, removing and installing devices and electrical equipment;

- adjustment and fixing work;

- typical malfunctions of the electrical equipment system, methods for their detection and elimination;

— basic properties of metals;

– purpose of heat treatment of parts;

- the device of universal special devices and instrumentation;

— system of tolerances and landings;

— grades and parameters of roughness;

- technical conditions for assembly, repair and adjustment of units, assemblies and devices;

- methods for identifying and ways to eliminate complex defects found in the process of repair, assembly and testing of units, assemblies and devices;

- Rules and test modes;

- technical conditions for testing and delivery of units and assemblies;

— specifications for repair, assembly, testing and adjustment of complex units and electrical equipment;

- purpose and rules for the use of complex test facilities;

- device, purpose and rules for the use of control and measuring instruments;

- electrical and wiring diagrams of any complexity and the interaction of devices and units in them;

- design of universal and special devices;

- the frequency and volume of maintenance of electrical equipment and the main components and assemblies of vehicles;

- causes of wear of mating parts and ways to identify and eliminate them;

— arrangement of test benches;

— rules and regulations on labor protection, industrial sanitation and fire safety;

- rules for the use of personal protective equipment;

- requirements for the quality of work performed;

- types of marriage and ways to prevent and eliminate it;

- industrial signaling;

- requirements for the rational organization of labor in the workplace.

2. Job responsibilities

2.1. Dismantling of aggregates and electrical equipment of vehicles.

2.2. Identification and elimination of malfunctions in the operation of units, mechanisms, devices of cars and buses.

2.3. Chisel cutting, hacksaw cutting, filing, deburring, washing, threading, drilling holes on the jig in the car, cleaning from dirt, washing after disassembly and lubricating parts.

2.4. Connection and soldering of wires with devices and electrical equipment.

2.5. Dismantling of trucks, including special and diesel ones, cars, buses over 9.5 m long and motorcycles.

2.6. Repair and assembly of diesel, special trucks, buses, motorcycles, imported cars, pickup trucks and minibuses.

2.7. Removal and installation of simple lighting fittings.

2.8. Cutting, splicing, insulating and soldering wires.

2.9. Performing fixing work during the first and second maintenance, elimination of identified minor faults.

2.10. Performing fastening work on threaded connections during maintenance with the replacement of worn parts.

2.11. Dismantling, repair, assembly of complex units, units and devices and their replacement during maintenance.

2.12. Running in cars and buses of all types at the stand.

2.13. Adjustment and testing on stands and chassis of complex units, components and devices of vehicles and their replacement during maintenance.

2.14. Checking parts and assemblies of electrical equipment on test equipment and test fixtures.

2.15. Disassembly of parts after disassembly and washing.

2.16. Locksmith processing of parts according to 12-14 qualifications using fixtures, locksmith and control and measuring tools.

2.17. Locksmith processing of parts according to 7-10 qualifications using universal devices.

2.18. Complicated locksmith processing, fine-tuning of parts according to 6-7 qualifications.

2.19. Repair and installation of complex units and assemblies.

2.20. Static and dynamic balancing of parts and assemblies of complex configuration, drawing up defective lists.

2.21. Installation of devices and units of electrical equipment according to the scheme with their inclusion in the network.

2.22. Identification and elimination of complex defects and malfunctions in the process of repair, assembly and testing of units, components of vehicles and electrical equipment.

2.23. Diagnostics and adjustment of systems and units of trucks, cars and buses that ensure traffic safety.

2.24. Management of workers of lower ranks of the same profession.

3. Types of work

Car mechanic of the 5th category performs the following types of work:

3.1. Installation according to the full scheme, connection to the network, checking and adjusting them during the maintenance of units and electrical equipment.

3.2. Balancing crankshafts with flywheels.

3.3. Repair, assembly, testing, elimination of defects on generators, stators, speedometers.

3.4. Assembly and testing of hydraulic lifts of the dumping mechanism.

3.5. Repair and assembly of torque converters.

3.6. Bench testing, adjustment, diagnostics of engines of all types and brands.

3.7. Maintenance, calibration and repair of instruments for checking transmission, steering, flow meters and gas analyzers.

3.8. Replacing and adjusting bearings on front and rear axles, diagnosing brakes, steering controls, lighting and alarm systems.

3.9. Checking on the stand, adjustment, elimination of defects on ignition distributors, relay-regulators.

3.10. Repair, assembly, installation and adjustment of hydraulic and pneumatic brakes.

3.11. Post-bench test inspection, troubleshooting and final fixing of all cylinder, main and connecting rod joints.

4. Rights

A car repairman of the 5th category has the right to:

4.1. For all social guarantees provided for by law.

4.2. Require the management of the enterprise to provide assistance in the performance of their professional duties and the exercise of rights.

4.3. Demand the creation of conditions for the performance of professional duties, including the provision of the necessary equipment, inventory, a workplace that meets sanitary and hygienic rules and regulations, etc.

4.4. To receive special clothing, special footwear and other personal protective equipment.

4.5. Additional vacation.

4.6. Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.

4.7. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

4.8. Submit proposals for the management of the enterprise to improve the organization and improve the methods of work performed by it.

4.9. Request personally or on behalf of the immediate supervisor documents, materials, tools, etc., necessary for the performance of their duties.

4.10. Improve your professional qualifications.

4.11. Other rights provided by labor legislation.

5. Responsibility

Car mechanic of the 5th category is responsible for:

5.1. For failure to perform or improper performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Russian Federation;

5.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation;

5.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation.

Job description car mechanic 5th class

I approve

[position, signature, full name

manager or other

An official authorized

Approve

[legal form, job description]

organization name, [day, month, year]

enterprises] M. P.

Job description

car repairman of the 4th category [name of organization, enterprise, etc.]

This job description was developed and approved in accordance with the provisions of the Labor Code of the Russian Federation, the Unified Tariff and Qualification Handbook of Works and Professions of Workers Issue 2, approved. Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45, List of industries, workshops, professions and positions with harmful working conditions, work in which gives the right to additional leave and a shorter working day, approved. Decree of the USSR State Committee for Labor and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22, Model norms for the free issue of certified special clothing, special footwear and other personal protective equipment to workers in cross-cutting professions and positions in all sectors of the economy, employed in work with harmful and ( or) dangerous working conditions, as well as work performed in special temperature conditions or associated with pollution, approved. by order of the Ministry of Health and Social Development of the Russian Federation of October 1, 2008 N 541n, and other regulatory legal acts regulating labor relations.

1. General Provisions

1.1. The 4th category car repair mechanic belongs to the category of workers and reports directly to [name of the position of the immediate supervisor].

1.2. A person with a secondary vocational education and work experience in the specialty of at least [value] years is accepted for the position of a car repairman of the 4th category.

1.3. A car repairman of the 4th category is accepted and dismissed from work by order [the position of the head of the organization].

1.4. A 4th category car repairman must know:

Basic techniques for disassembling individual simple units;

Purpose and rules for the use of locksmith and instrumentation tools;

Name and marking of metals, oils, fuel, brake fluid, detergent compositions;

Basic information about the structure of cars and motorcycles;

Assembly order of simple knots;

Techniques and methods for cutting, splicing, insulating and soldering electrical wires;

The main types of electrical and insulating materials, their properties and purpose;

Methods for performing fastening work and the scope of the first and second maintenance;

Purpose and rules for the use of the most common universal and special devices and instrumentation;

Basic mechanical properties of processed materials;

Appointment and use of cooling and brake fluids, oils and fuels;

Purpose and basic properties of materials used in the repair of electrical equipment;

Rules for the use of pneumatic and power tools;

Fundamentals of electrical engineering and metal technology in the scope of the work performed;

The device and purpose of nodes, assemblies and devices of medium complexity;

Device and purpose of diesel and special trucks and buses;

Rules for the assembly of cars and motorcycles;

Electrical and wiring diagrams of cars;

Repair of parts, assemblies, assemblies and devices;

Basic methods of disassembly, assembly, removal and installation of devices and units of electrical equipment;

Adjustment and fixing works;

Typical malfunctions of the electrical equipment system, methods for their detection and elimination;

Basic properties of metals;

Purpose of heat treatment of parts;

The device of universal special devices and control and measuring tools;

The system of tolerances and landings;

Roughness grades and parameters;

Specifications for the assembly, repair and adjustment of units, components and devices;

Methods for identifying and ways to eliminate complex defects found in the process of repair, assembly and testing of units, assemblies and devices;

Rules and test modes;

Specifications for testing and delivery of units and assemblies;

Purpose and rules for the use of complex test facilities;

Device, purpose and rules for the use of control and measuring instruments;

The design of universal and special devices;

The frequency and volume of maintenance of electrical equipment and the main components and assemblies of vehicles;

Rules and norms for labor protection, industrial sanitation and fire safety;

Rules for the use of personal protective equipment;

Requirements for the quality of work performed;

Types of marriage and ways to prevent and eliminate it;

Industrial alarm;

Requirements for the rational organization of labor in the workplace.

2. Job responsibilities

2.1. Dismantling of aggregates and electrical equipment of vehicles.

2.2. Identification and elimination of malfunctions in the operation of units, mechanisms, devices of cars and buses.

2.3. Chisel cutting, hacksaw cutting, filing, deburring, washing, threading, drilling holes on the jig in the car, cleaning from dirt, washing after disassembly and lubricating parts.

2.4. Connection and soldering of wires with devices and electrical equipment.

2.5. Dismantling of trucks, including special and diesel vehicles, cars, buses over 9.5 m long and motorcycles.

2.6. Repair and assembly of diesel, special trucks, buses, motorcycles, imported cars, pickup trucks and minibuses.

2.7. Removal and installation of simple lighting fittings.

2.8. Cutting, splicing, insulating and soldering wires.

2.9. Performing fixing work during the first and second maintenance, elimination of identified minor faults.

2.10. Performing fastening work on threaded connections during maintenance with the replacement of worn parts.

2.11. Dismantling, repair, assembly of complex units, units and devices and their replacement during maintenance.

2.12. Running in cars and buses of all types at the stand.

2.13. Identification and elimination of defects, malfunctions in the process of adjustment and testing of units, assemblies and devices.

2.14. Disassembly of parts after disassembly and washing.

2.15. Locksmith processing of parts according to 12-14 qualifications using fixtures, locksmith and control and measuring tools.

2.16. Locksmith processing of parts according to 7-10 qualifications using universal devices.

2.17. Repair and installation of complex units and assemblies under the guidance of a highly qualified locksmith.

2.18. Static and dynamic balancing of parts and assemblies of complex configuration, drawing up defective lists.

2.19. Management of workers of lower ranks of the same profession.

3. Types of work

Car mechanic of the 4th category performs the following types of work:

3.1. Repair and assembly of engine blocks with a crank mechanism.

3.2. Installation in the camshaft block.

3.3. Dismantling of generators, stators, speedometers.

3.4. Testing of hydraulic lifts of the dumping mechanism.

3.5. Inspection and disassembly of torque converters.

3.6. Assembly, repair, leak testing, installation and fastening of diesel engine cylinder heads.

3.7. Repair and assembly of engines of all types.

3.8. Front wheel toe angle adjustment.

3.9. Repair and assembly brake pads drums, shock absorbers, differentials.

3.10. Dismantling, repair, assembly, testing of compressors, brake valves.

3.11. Disassembly automatic boxes gears.

3.12. Assembly and bench testing mechanical boxes gears.

3.13. Installation, adjustment of lifting and lowering the body of dump trucks, dump truck mechanisms.

3.14. Repair, assembly and adjustment of front and rear clutch axles, cardan shafts.

3.15. Checking and editing under a press in a cold state of the front Axles.

3.16. Replacing liners, scraping, adjusting main bearings.

3.17. Pistons - selection by cylinders, assembly with connecting rods, change of piston rings.

3.18. Checking and adjustment during maintenance of devices and assemblies of complex electrical equipment.

3.19. Repair, assembly, testing and installation of gearboxes and differentials in the rear axle crankcase.

3.20. Disassembly and repair of relay-regulators, ignition distributors.

3.21. Replacement of the crankshaft oil seal, clutch hub, ball tie rod pins, rotary cams.

3.22. Disassembly of hydraulic and pneumatic brakes.

3.23. Repair, assembly, steering adjustment.

3.24. Check on the device connecting rods assembled with pistons.

3.25. Connecting rods - change of bushings in the upper head of the connecting rod with adjustment to the piston pin; final fit on the crankshaft journals on a plumb line in four positions.

3.26. Installation according to the wiring diagram of cars.

4. Rights