In this article, we will look at one of the ways to complete the exam exercise Check in in reverse in the box (garage).

The procedure for performing the exercise is reversing into the box (garage)

1. We start the exercise from the START line, move parallel to the line of the AB racks as close as possible to it.

When pillar A is level with the first third of the window (on another car, a mirror can be a reference), we stop (as in the exercise "", when a certain skill is reached, you can not stop at the intermediate stages of execution).

2. Turn the steering wheel to the leftmost position, move at low speed, without crossing the line of cones EF, stop.

3. We look in the side rear-view mirrors, determine from which side the distance from the side line of the car to the first pillars is greater. In the direction of a greater distance, it will be necessary to turn the wheels.

In our case, the distance from the right pillar B is greater, we do not see the pillar A in the left mirror at all.

4. We turn the steering wheel to the extreme right position, slowly move back, when the distances from the side lines of the car to the first pillars on the right and left are the same, we stop.

Rice. 5

If the starting position shown in Fig. 2 was successful, then the line of the AC (and BD) pillars will be parallel to the line of the body.

We make the wheels straight, move back until the front dimension of the car crosses the line of the pillars AB, we stop (an auxiliary landmark is the G pillar at the level of the window edge). Put in neutral and handbrake.

Rice. 6

If the starting position turned out to be, for example,

then when moving towards the cones EF, the car will be in this position:

Rice. eight

The distance to the right is greater, which means we turn the steering wheel to the right, start moving back, when L1 is equal to L2, we stop.

Rice. 9

We make the wheels straight, move back until the rear wheel is on the line of the AB racks, stop.

Rice. 10

We look in the mirrors, determine from which side the distance from the sidewalls of the car to the last C and D pillars is greater in that direction and turn the wheels, in our case to the right. We move back until the car is parallel to the line of the AC pillars,

Rice. eleven

make the wheels straight, finish the exercise.

On the other hand, the exercise Reversing into the box (garage) is performed similarly.
If you see that you do not fit into the box, you can return to the EF cones and repeat the race.

Exam errors in the exercise Reversing into the box (garage)

Gross errors - 5 penalty points

• He knocked down elements of marking equipment or crossed the line of horizontal marking of the site.
• Did not cross the "STOP" line (according to the projection front clearance TS).

Medium errors - 3 penalty points

• I could not enter the box with a one-time reverse gear.
• Did not shift into neutral after stopping with the engine running.
• Did not include parking brake after stopping at the STOP line.

Minor mistakes - 1 penalty point

• During the exercise, the engine stalled.

In practice, this can be not only a garage, but also a regular parking lot, where we have to put our car between two others.

What is a boxing ride?

The exercise is a rectangle in which you need to drive in reverse (the projection of the front bumper must cross the control line), and then leave the box (cross the end line of the exercise). The space for this maneuver is limited. The start of the exercise can be either to the left or to the right of the imaginary box.

Check-in boxing in reverse.

The procedure for performing the exercise "check in boxing in reverse":

1. We drive up to the "Start" line, stop in front of it. Shift into neutral, put the car in hand brake.

2. We drive into the box in reverse.

3. We turn on the neutral gear, put the car on the handbrake.

4. We leave the box, cross the line of the end of the exercise.

How to properly perform the exercise "check in boxing in reverse":

We turn the steering wheel while standing still only in case of emergency, we try to do it on the move!

1. It is desirable to drive up to the boxing perpendicularly, moving closer to the entrance to the boxing. The closer we snuggle up to the entrance to the box, the more space will be left for the next maneuver.

2. Focus on the first cones marking the entrance. We completely drive through the box (we align the rear bumper with the far ((in the direction of travel)) wall of the box) and turn the steering wheel all the way in the opposite direction from it. We continue to move as long as the border of the exercise allows,

3. Turn on reverse gear and move into the box, twisting the steering wheel in the opposite direction.

4. We are waiting for the side mirrors to go behind the pillars indicating the entrance, and then align the front of the car between them, if necessary. To do this, turn the steering wheel in the direction of a shorter distance, and as soon as the car stands up straight, we put the wheels evenly.

5. We turn on the reverse gear and move to the target of the box. We keep (according to the side mirrors) the same distances between the sides of the car and the posts indicating the entrance, or we correct the movement of the car to the desired position.

6. Having driven close to the box, we switch our attention to the central mirror. Now our task is to combine the center of the car with the central pillar of the rear wall of the box. To do this, we drive into the box and unscrew the steering wheel towards the central pillar, focusing on the central mirror. As soon as the center of the car and the rack converge in one line, we put the wheels straight and continue to move.

7. We are waiting for the side mirrors to go behind the racks indicating the entrance, then you need to align the front of the car between them, if necessary. To do this, turn the steering wheel in the direction of a shorter distance, and as soon as the car stands up straight, we put the wheels evenly.

8. We call in boxing to the end. We stop. Engage neutral gear and parking brake.

9. We leave the box along the same trajectory as we drove in.

Common mistakes when performing the exercise "check in boxing in reverse":

Table of penalty points for the exercise "check in boxing in reverse":

1.	He knocked down elements of marking equipment or crossed the line of horizontal marking of the site.	5
2.	Crossed the "Stop" line (according to the projection of the front clearance of the vehicle).	5
3.	Could not turn around with a one-time reverse gear.	3
4.	Did not shift into neutral after stopping with the engine running.	3
5.	Did not apply the parking brake after stopping in the parking zone.	3
6.	During the exercise, the engine stalled.	1

Reverse parking can be a huge challenge for a newbie. This exercise causes concern, as "step left, step right" and the car will have to be repaired. Especially if you don't control the speed yet.

Therefore, we decided to figure out how to drive into the garage in reverse. We present to your attention step-by-step instructions and a video tutorial.

In a driving school, parking in reverse is called the "Garage" exercise. This action you perform first with the instructor's comments, and then, it is possible that you will have to take it in an exam in front of a traffic police representative. Parking in reverse is in many ways similar to a similar entry into the box. And yet, if you master it, you can easily turn around on a small section of the road.

Step-by-step instructions on how to reverse into the garage will be presented to our readers below, as well as the video. And now we will discuss a few immutable rules that must be observed.

First, take all possible security measures. For example, if you need to reverse park between two cars, remember that if you turn the steering wheel to the left, front bumper shifts to the right and vice versa. Therefore, look both at the roadway and at parked cars.

Next, do not forget that when reversing, you need to look in the mirrors and back. Well, the main mistake of a beginner is the direction of rotation of the steering wheel. That is, you drive to the left, turn the steering wheel also to the left, and vice versa. The last thing I would like to mention is the speed of movement. The lower it is, the more secure you will be. After all, even if you do not fit in a little parked car, or into the wall of the box, then the minimum driving speed will help to avoid further repairs.

Some beginners decide to enter the box in front. And, if you need to park, they do the same. But, this is the wrong decision.

The fact is that you can call in easily and simply, but in order to leave, you will have to try. After all, you need to leave in reverse gear. Difficulties can arise if the maneuver is performed on a narrow road, and you will not be able to maneuver the car enough times.

And yet, if you drive in reverse, you will not be able to control the roadway located in the blind zone. Reverse entry into the box, you will have to leave in first gear. And it will become a very simple task. You will not limit yourself in maneuvers, even if there is little room for it. At the same time, your review will be just excellent. In this case, you also do not have to worry about security.

Check in boxing in reverse step by step instructions

While studying at a driving school, you will visit the circuit. There the instructor will help you to reverse park correctly. The technique here is almost the same as when reversing into the garage.

Below we provide you with a video on how to do this maneuver correctly. But first, let's describe it to you verbally. Imagine that the entrance to the garage is to the right of the car (otherwise, do the opposite). The car is perpendicular to the gate:

- drive away from them for three meters and stop. The distance between the gate and the machine should be approximately one and a half model widths;

- Engage reverse gear. Turn the steering wheel to the right so that the car is heading straight for the gate leaf. At the same time, turn the entire body and head to the right. You should drive a little, releasing the clutch pedal and lightly pressing on the gas;

- when rear bumper will be on the goal line, stop the move. Leave some space between the side gate leaf. Don't get overwhelmed and don't be afraid. If at least 10 centimeters remain between the wing and the wall, you will drive in perfectly without scratching anything. Also, if you leave a long distance, you can scratch the left side of the car;

- turn the steering wheel to the right to the extreme point. It will turn out that the drive wheels will turn in the direction of the gate, and the remaining two tires will turn out in an arc;

- start driving lightly until the car is parallel to the side wall of the box;

- align the front wheels and drive into the garage. Start looking at the back wall of the box to slow down in time.

Of course, if the car has parking sensors, the maneuver is much easier. But, it is best to learn to drive into the garage in reverse without it. After all, technology is technology, and it can fail at the most crucial moment.

In general, this is all you need to know about how to properly drive into the garage in reverse. The main thing is to clearly imagine final result, and practical skills will be acquired very quickly.

Quite often, on the car of a friend, acquaintance, relative, you can see scratches and other damage to the body. To the question "What happened?" you get the answer "I drove into the garage."

To avoid such unpleasant situations and pass the exercise on the site in the traffic police the first time, we will look at how to properly drive into the garage in reverse, and also get acquainted with the most common mistakes and the table of penalty points. This will allow you to come to the exam prepared and confident in your own abilities and knowledge - although this is not enough, the technique must still be worked out.

Location

The venue for the exercise is a specially equipped area that imitates a garage, into which you need to drive in reverse. The task of the driver is to enter the "garage" (box, parking space - depending on who imagines what) without hitting its side walls and without hitting the back of the car against the wall behind.

Area size: car width +1m, car length +1m, the exercise lane is two car lengths.

With such dimensions and dimensions of the training machine, it will not be possible to drive into the “garage” in front. That is why the exercise is performed exclusively in reverse.

Target

The main objective of the exercise is to teach future drivers to reverse into the garage and into the parking space between two cars. Today it is difficult to find a parking lot where you can park in front, as there is not enough free space for this.

By reversing the exam, the cadet of the driving school shows the traffic police inspector his skills and ability to drive into the garage on his own, without damaging his own car.

Stages

Checking into the garage in reverse consists of three main stages:

• Drive up and stop at the start line.
• Drive into a pocket simulating a garage.
• Stay

The technical side of the exercise

Now let's look at each stage in more detail so that you know what to expect on the exam and how to pass it successfully.

The first step is to drive up to the starting line and stop without crossing the lines with a bumper. After a stop, neutral gear is engaged. You should immediately pay attention to the "neutral": if you do not switch the car to it, you can get a penalty point.

Next, we move off and begin to slowly move forward. Approaching the "garage" you need right side car to snuggle closer to the first chip - the beginning of the right wall of the garage. If this is not done, then there may not be enough space for the further execution of the exercise, and it will not be possible to complete the race.

Thus, we reach the indicated chips with the right mirror and turn the steering wheel to the left until it stops. The car is now moving to the left. When driving, keep the steering wheel securely in the left position, preventing it from turning in the opposite direction. We also carefully look in the mirror to the right - in it you need to catch a chip, which is the beginning of the wall to the right relative to the car. This chip should be at some distance from the side of the car - 10-15 centimeters. This is how everything should be reflected in the mirror.

As soon as all the above conditions are met, we stop the car and put the wheels in a level position. After that, we turn on the reverse gear and start moving back in a straight line.

Now turn back and look at rear glass. To make it comfortable, you can hug the front passenger seat with your right hand. We observe how the car gradually drives into the right place, but up to a certain point. When a chip appears near the right rear door - the beginning of the garage wall - we stop again.

The next step is to turn the steering wheel to the right until it stops and resume the movement back. We carefully monitor what is happening in the mirror. When the distances between the side pieces and the sides of the car are the same, quickly align the steering wheel and put the wheels in an even position, while not stopping or slowing down.

We drive deep into the "garage", and when the front of the car crosses the line of chips - the beginning of the walls - we stop, turn on the neutral gear and put the car on the "handbrake".

End. The exercise of reversing into the garage is completed, the car is in the right place and you can already relax.

If you do everything as described above, then this guarantees you a 99% success rate in the exam.

Possible mistakes

TO common mistakes relate:

• Downed chips, which are the beginning of the right and left walls of the "garage".
• A downed chip behind the car, upon arrival at the garage.
• The car did not fully drive into the "garage".

In the first case, the error can occur for two reasons:

• The car came too close to the right side of the chip.
• Too early began to align the steering wheel on arrival.

In the second case, the fault will be bust with entry.

And the last case is extremely rare, but still happens. Here the reason lies in the fear of knocking down a chip behind the car.

Penalty points

1. A chip is knocked down or a horizontal line is crossed - 5 points
2. Crossed "Stop line" - 5 points
3. Engine stalled - 3 points
4. When the engine was running, the neutral gear was not engaged - 3 points
5. Upon arrival, the reverse gear was switched on several times - 3 points
6. At the end of the exercise, the car was not put on the handbrake - 3 points

Driving into the garage in reverse in real conditions

Now imagine that the exams are passed, the rights are obtained, and it is time to test the acquired skills in practice. Consider a situation where we need to drive into a garage, with minimal space.

Moving forward, we drive up with the right mirror as close as possible to the beginning of the garage wall, turn the steering wheel to the left and look in the right mirror. As in the case of the site, the wall should appear in the mirror at a distance of 10-15 cm from the starboard side of the car.

We turn on the reverse gear and start to call in the garage. As soon as the beginning of the wall is level with the right rear door, turn the steering wheel to the right and continue moving.

When the car takes a level position in relation to both walls, the wheels are aligned, and it remains only to drive into the garage to the end.

At the end, we turn on the "neutral" and put the car on the "handbrake".

It is worth noting that various objects can lie near the walls of the garage, on the floor - parts, tires, tool boxes, etc. Therefore, in this situation, you need to ensure that you do not run into them. Otherwise, the tire may be punctured or damaged. paintwork body.

Parking using the exercise “Reversing into the garage”

Everything here is identical to the site and the real garage. Only instead of chips and walls, you need to navigate by the headlights of cars between which you need to park. True, if the roadway is narrow, then you need to complete all the steps quickly so as not to create a traffic jam from cars coming from behind.

illustrative example

In order to see a live example of the exercise, we recommend watching a short video that clearly shows how the whole process of backing into the garage goes.

Easy, simple, fast

In order to successfully pass the race in the garage in reverse, more practice is needed. So if something doesn't work, then take extra hours or find a private instructor who can help solve your problem. Only persistent development of the technique of arrival will allow you to pass the exam easily, simply and quickly.

After carefully reading all the articles in the cycle, you will have the opportunity to pass the exam perfectly!

Performance

Press the right side of the car to the ABD line as much as possible, otherwise, when maneuvering to the left at the red dot (see Fig.), there will not be enough space and turning radius of the car to put it in front of the box. We turn on the first gear, remove from the "handbrake".
Start driving while keeping the vehicle parallel to the ABD line.
As soon as the right Side mirror reaches the B-pillar, the front bumper of the car will be opposite the middle of the box (BD lines).
Make two turns with the steering wheel to the left, starting the rotation with the right hand.
By turning the wheels all the way to the left, the car will move along the green path to the white line with the E-pillar.
Hold the clutch, preventing the car from accelerating, put the car as perpendicular as possible to the white line, and when there is very little space left from the hood line (somewhere 1 - 1.5 meters), we squeeze the clutch pedal to the floor to the end, using inertia , align the wheels, make two turns with the steering wheel in the opposite direction and stop.
Engage reverse gear and turn back over your right shoulder.
Tilt your body towards the center of the car and, looking through the small window in the rear right door, start moving.
Raise the clutch until the moment you start moving, hold it at this point, allowing the car to pick up speed a little, and immediately depress the clutch pedal to the floor, preventing it from accelerating.
If there is not enough momentum to drive and see the D-pillar in the small window of the right rear door, repeat the “nudge” technique. that is, again raise the clutch pedal until the moment of movement and again press it to the floor.
The slower you move, the more likely you are not to miss the D-pillar.
As soon as you see the D-pillar in the small window, immediately turn the steering wheel to where you are looking, that is, to the right all the way, making two turns, starting the rotation with your left hand.
The rear of the car begins to drive inside the box, rounding the D-pillar.
You will see how the front of the car becomes perpendicular to line E.
Continue gently pushing the car with the clutch, and once the C-pillar comes to the middle of the rear window, depress the clutch all the way to the floor.
The car will start to slow down, moving by inertia. and while he is moving, make two turns with the wheel in the opposite direction, that is, to the left, starting the rotation with your right hand.
If you did everything right, the front of the car will be perpendicular to the white line on which the E-pillar stands.
Turn around and drive up to Line C.
Look forward to the B and D pillars.
Your vehicle must be parked inside the BD line.
Disengage the gear, put the car on the parking brake.

Penalty points when performing the exercise "Entering the box":

5 points

knocked down elements of marking equipment or crossed the line of horizontal marking of the site
crossed the "Stop" line (according to the projection of the front clearance of the vehicle)

3 points

could not turn around with a one-time reverse gear
did not shift into neutral after stopping with the engine running
did not apply the parking brake after stopping in the parking zone

To pass the exercise "Entering the Boxing", you must score a total of less than 5 penalty points.