On May 11, my family and I gathered to go home and after 50 km, picking up speed within 150 km / h, my engine explodes. I was driving in the extreme left lane, and when I heard an explosion and a roar, I quickly turned on the emergency gang and went to the right side of the road ... I thought from the sound and sensations that the body kit was torn off, but after a couple of seconds the brake pedal became wooden and the steering wheel too ... From under smoke poured from the hood .... I opened the hood, I saw the engine was on fire, quickly took a fire extinguisher and put out the fire .. Piston out. I realized that I came...

Let me remind you that the engine was installed quite recently, it was bought after a major overhaul and a bulkhead, according to the seller, a person I know will not lie, so it was decided to take the engine from him ...

When the engine was installed on the car in the winter, after I started it, I noticed that the valves were knocking. But it seems like not much, so I decided to wait until the engine warms up. It seems like the knocking disappeared, but no ... it knocks at idle, but it doesn’t knock when driving with a gear with any kind. Traveled, rolled around. I drove 2 stages to the rally and 1 training session and that’s all, then there was a breakdown in the body, a spar rupture, which I could not fix for a very long time and the car was practically in the garage. But as soon as the snow melted, I began to try to disperse the car on the Moscow Ring Road. 3 trips on almost bald winter tires made it possible to ride only 160 km / h. Further, the car could no longer be dispersed ... I changed tires for the summer, 1 exit along the Moscow Ring Road 140 km / h and a trip to the village, which ended unfavorably.

So here's the opening. Today, May 16, 2014, I dismantled half of the engine. He removed the cylinder head and was horrified by what he saw. First, oil gushed from the second pot when I took out the ignition coil. And then, having removed the cylinder head, I saw the main thing ... Piston group so worn out that it is surprising that the car went on this engine at all. Immediately found the cause of the knock. It turned out that the inlet valves in the first pot were knocking, as evidenced by the distinct scars from the valves on the piston ... We go further through the pots. The second pot, the piston itself, is badly burnt, but not full of holes. The third pot is good, but the fourth surprised the most. The piston in it is burnt to the rings along the upper edge closer to the intake valves. Here's to you overhaul or engine overhaul by service station professionals. When contacting services, it’s better to always be close to your favorite machine ... It’s a pity that I didn’t immediately measure the compression in this engine, it was my mistake ...

As a result, after the explosion in the engine, the connecting rods in three pots, 1, 2 and 4, were torn apart. The third pot was intact, the rest failed ... I lost the connecting rods from the torn dvigla along the way ...) The pallet was torn apart. I’m slowly disassembling and removing all attachments, burnt wiring and a dead engine ...

Now there are plans for a complete cleanup. engine compartment, bringing it into full order and planting a NEW heart to my dear and beloved Nissan WOLF.

Re-equipment of serial vehicles is usually divided into two main types: useful tuning and styling. In our car market ObvesMag we offer to choose and buy accessories for Nissan Almera Classic 2006-2013, which will make the car even more stylish. All car owners will be very pleased not only to stand out among the rest, but to install useful daily operation additions. Buy tuning from the main Russian and foreign brands, and your eye will be able to enjoy the original and bright appearance of this car any day.

An impressive variety of tuning products for Almera Classic 2008-2012 is now available, and often many people ask the question: what to do in the beginning? Our store can offer to begin with to consider something without which the use of your vehicle will not be so easy and convenient. In the interior of any car, you need to buy floor mats that retain moisture, which will help prevent dampness. In a car, not only is there a possibility of corrosion, but damage to the electrical wiring is also possible, which is much worse.

The second type of important improvements is the installation of deflectors for windows and the hood. This tuning will protect Nissan Almera Classic 2010-2011 from winds and chips. In our online store there are deflectors of all types and sizes for sale. For example, deflectors with chrome moldings: these accessories have an excellent appearance.

Body kit installation in Moscow

Basic tuning style Nissan Almera The Classic B10 that our store is known for is the installation of a steel body kit and aluminum sills. These footrests help when landing in the cabin and make the operation of crossovers more comfortable. Without thresholds, it can be impossible for small children and older people to keep their clothes clean, it is more convenient to clean the roof from snow or secure the luggage box with them.

A practical and stylish body kit made of stainless steel allows you to save the bumpers and fenders of the car from a collision with neighbors downstream and from other troubles. Many small collisions will pass you by thanks to the robust construction and stainless steel. Similar tuning for Almera Classic is vital when driving on poor quality roads or cramped modern big city with lots of cars.

We also have a huge variety of accessories for tuning the interior and exterior of cars. Various overlays for radiator grilles, spare wheel boxes and hood stops. Each such accessory will make a look modern car more respectable and attractive. You have the opportunity to install all tuning yourself or in our service center at the time of buying. We deliver any accessories in Moscow by courier or to any city in Russia by logistics companies: it's fast and easy.

Nissan Almera was first introduced to the public in 1995. The model belonged to the C-class and was produced in 3 body modifications - a three-door hatchback, five-door hatchback and a sedan. The car was built on the N15 front-wheel drive platform. Since its release, the Nissan Almera has been modified several times, and the tuning of this car is also very successful.

Very rarely a person can buy a car that will completely suit him and will bring maximum pleasure. In most cases, people buy a car that suits their price, can be considered a good vehicle these days, is quite economical and well suited for city driving - all this can be said about the Nissan Almera. Some people buy such a car and drive it until they buy the next one, while others prefer to change and tune the car exactly the way they want. How to achieve this? Enough to spend tuning nissan almera.

Tuning Nissan Almera Classic

Tuning of any car is needed, first of all, in order to decorate vehicle, effectively highlight it in the stream of other cars and attract the attention of others. Tuning is usually divided into three types: external, internal and technical. External tuning Nissan Almera Classic is very attractive and incredibly diverse.

An aerodynamic body kit can be added to the car, which will not only change its appearance, but also help reduce air resistance when driving on high speeds. However, by setting aerodynamic body kit It must be remembered that this will lead to a significant reduction ground clearance, it is possible that because of this, the lower part of the body kit will touch the bumps in the road. You can radically change the look of the Nissan Almera if you put a body kit that will be made to order. Often, after this operation, it becomes difficult to find out the make of the car, but in any case, this is a very original solution, examples of which can be seen on photo tuning Nissan Almera.

To visually increase the stern of the car, you can install a spoiler on the trunk.

The difference in the color of cars is now very popular, which can be used when tuning Nissan Almera. To bring this to life, it is enough to take a carbon film and wrap some parts of your car with it.

Some car enthusiasts seek to make chip tuning of the engine to improve technical characteristics, but experts do not approve of this decision due to the fact that this operation does not bring much benefit in the case of the Nissan Almera.

Tuning salon Nissan Almera

Not much different from tuning the interior of any other modern car. You can replace some parts, add carbon fiber inserts, if you want to make global changes, you should re-upholster the interior using quality material the color that you like and that matches perfectly with all the details of the interior. In addition, it would be a good idea to replace the car radio, install air conditioning, and make good soundproofing. The most important thing is that both the driver and passengers should always be pleasant and comfortable inside the car.

Tuning Nissan Almera N16

The N16 is one of the most popular models of the Nissan brand. The car received high marks from many motorists due to its undoubted merits. The Nissan Almera N16 is ideal for city driving and long distance travel.

Though this car has an excellent design, a high level of comfort and safety, and its characteristics fully meet the requirements for modern cars, many owners strive to bring something new into it, add a piece of their character. This is what tuning operations are designed for.

What exactly needs to be changed in the car should be decided by the owner himself. It should be said that many car owners prefer not to change the Nissan Almera too much, limiting themselves to simple styling. A similar situation can also be observed when it comes to Nissan Almera 2014 tuning. Perhaps this is where we should stop when the goal of tuning is to make the car unusual and unique. However, some car enthusiasts also seek to improve the engine, suspension, brakes and many other important details in order to get the most out of their car.

To improve the technical qualities, the Nissan Almera is being modernized. Tuning includes multiple structural changes. This includes: replacement of body parts, interior, suspension and engine. This operation is aimed at improving the power and quality characteristics of the car.

Outdoor tuning

The first stage of modernization is the alteration of the body of the Nissan Almera. Tuning the outside is a change in the design of the car with the addition of parts that enhance specifications. So, it improves the aerodynamic qualities and streamlining of the oncoming air flow.

External tuning "Nissan Almera H16" involves the installation of modified spare parts:

• Front and rear bumper.
• trunk lid.
• Threshold pads.
• Hood and roof air intakes.
• Glass deflectors.
• Radiator grille.
• Air outlet grilles on the front fenders.

There are many ways to make a part, but fiberglass remains the most common. It holds its shape well, is light in weight and strong enough not to break under the pressure of an oncoming air flow.

Interior modification

The second stage of improvement is changing the interior of a vehicle such as the Nissan Almera. Interior tuning is a refinement inner world a car that can be practical, decorate and express individuality. A complete change of the interior is carried out in several stages:

1. Complete disassembly of the cabin means:

• Seat removal. To do this, you need a 14 head, which will unscrew the ski mounting bolts. It is worth noting that the front fasteners should be unscrewed first, and then the rear ones. If you do the opposite, it will be quite difficult to get to the rest.
• Remove instrument panel. It is necessary to unscrew 16 fastening screws, which are hidden in different places under plastic plugs. Before removing, it is worth dismantling the multimedia system, wheel, heater control panel, light controls, control panel and glove compartment. You will also have to disconnect all the wires that are connected to the instrument panel.
• The dismantling of the lining of the racks and the ceiling is carried out with a screwdriver. It will be necessary to carefully remove all the plugs and clamps, and then remove the parts.
• After the interior is dismantled, it will be possible to remove the carpet.

2. Preparation of parts and installation:

• Seat replacement. They can be purchased in specialized stores. The most common are outlets from the Sparko company, since they have standard fasteners and are easy to install.
• Dashboard trim. First you need to decide which fabric will be glued to the regular plastic case. Many motorists choose Alcantara or leather. It is easy to install and lasts longer than others.
• Modification of racks and ceiling is carried out with the same material as the instrument panel. At the same time, the color gamut of the choice of material is quite wide, and any car owner will be able to choose what they like. Pasting is done using special glue, which can be bought where the material is sold, and a rubber spatula, which smoothes the surface and removes air.
• Noise and vibration isolation is placed on the floor, which is hidden under the carpet.

You can also install speakers in the door cards. This is done easily with screws. Installation is carried out on regular seats. Those who want to stand out are offered ready-made door cards for sizing material with round holes for speakers convex at the bottom.

Software engine tuning

Chip tuning "Nissan Almera" is a firmware on-board computer vehicle to increase power and driving dynamics. To perform this operation, you will need a laptop, a cable for connecting a PC and a car, software, firmware of the appropriate version.

The ideal option for flashing the motor is kernel version 28 for the Nissan Almera. Engine tuning in this case is carried out in the following sequence:

• The laptop is connected to the car and the ECU recognition program is launched.
• The old firmware is erased completely.
• With the help of the software, its new version is uploaded.
• The ignition is switched on. In this case, the on-board PC should show about 20 errors.
• The settings are reset, and everything works.

On the 28th core of the firmware, features are included that increase the performance of the car, namely:

• Fuel injection is carried out earlier by 0.25 seconds.
• The flow of incoming air through the throttle is increased by 17%.
• The amount of injected fuel is increased by 22%.

Physical engine tuning

In order to increase engine power on the Nissan Almera, tuning should be done by replacing some parts with improved ones. In this case, you will need to install the following spare parts:

• Lightweight valves Japan Power 070022.
• Pistons and connecting rods from JRW, which are 38 grams lighter than stock.
• Throttle valve AWD.
• WRR camshaft.

All of these spare parts will help lighten the weight of the engine and increase power characteristics, adding another 45 horsepower to the car.

Alternative optics

Tuning headlights "Nissan Almera" can even be ordered via the Internet. Main well-known manufacturers for this model are StandFree, Light Fire and SRS-light. All these companies represent Japan and specialize in tuning the headlights of Japanese cars.

DIY tuning

Many motorists do tuning the Nissan Almera with their own hands. Thus, the development, design and manufacture of the following parts is carried out:

• External body kits.
• Replacing the interior of the car by reupholstering interior parts.
• Tinted glass.
• Painting and airbrushing.
• Installing disks.
• Installation of acoustic multimedia systems.

All this motorists can do themselves, without resorting to expensive tuning studios. It is much cheaper, but takes a lot of time and effort.

Creation of outdoor tuning parts

Creating modified spare parts requires some experience. Most of the parts are made from fiberglass. For Nissan Almera, do-it-yourself tuning should be done slowly.

Technological process of production of external body kits:

• The basis is taken which is measured.
• The future part is modeled on the computer with all measurements and calculations of aerodynamics and streamlining.
• After the drawings are ready, pieces of fiberglass are made with a hardener replacement part. In this case, it is worth considering all the fasteners that will be needed during installation, because if the fiberglass hardens, then there will be no way to fix something.
• The part is painted, having previously gone through the stages of puttying and priming.

Thus, you can get a finished part that will be installed on the car.

Do-it-yourself installation

Do-it-yourself installation should be done slowly. For factory parts, as a rule, the fasteners are of a regular nature and are installed on standard seats. In the case of manufacturing a spare part on its own, the motorist must calculate this moment and provide for fasteners. Of course, in some cases, you will need to make additional holes and install fasteners that are not factory. Then you should separately think about the treatment of such places with anticorrosive or other protective agent.

Nissan Almera Classic - quality budget car, which, although it looks beautiful and restrained, does not differ in outstanding style. It would seem that the design of the car looks neat and pleasant - what else is needed for happiness at this price? However, some lovers of high style prefer to produce various kinds of tuning, which can change the familiar look of a popular Japanese car beyond recognition.

tuning options

Transforming the vehicle both outside and inside is quite simple. Tuning Nissan Almera Classic is a frequent occurrence among the owners of this car, therefore there are a great variety of options. The sedan received a fairly simple structure, not endowed with any frills: to transform the appearance of the car, the manufacturer offered the most Better conditions. This applies to both the body and the interior. Most importantly, you can do everything yourself, the main thing is to have a desire.

The most common tuning option is a change in body design. The auto parts market offers an endless array of parts for the Almera, from the front optics to the rear bumper. The second most popular is the creation of a new look for the interior, in which you can also replace a variety of elements: seat upholstery, dashboard and center panel, steering wheel. Quite a few enthusiasts resort to replacing the suspension or converting it. If, however, a comprehensive tuning is carried out, then the car cannot be recognized either in the photo or live.

External tuning

Appearance Nissan Almera Classic, as mentioned above, has a rather strict and restrained design. Some drivers don't like this arrangement. Someone wants to see their car more stylish, someone wants to stand out on the road, so there is only one way out - tuning. Japanese sedan lends itself well to all sorts of changes, so you can implement all your ideas on your own.

The most popular ideas are the replacement of the front and rear bumper and hoods, as well as side fairings. Stores specializing in spare parts for Almera offer many parts of various shapes and sizes, so there will definitely not be any problems with the choice. As a rule, new foglights are also purchased with them, as well as DRL, a radiator grille.

It is difficult to imagine a tuned car without new headlights and a spoiler. To make the "look" of the car irresistible, motorists, of course, change the front lights. They can be LED and xenon, with various forms lenses and lamps. There are many combinations. The taillights are usually not much attention, so the only thing that changes in them is the external pattern.

No less popular is mounting the spoiler to the trunk lid.

It is worth noting that this detail not only decorates the vehicle, but also improves its aerodynamic properties.

A peculiar subspecies external tuning is a suspension upgrade. There are only two options in this case: changing the old one or installing a new one. The transformation of the existing system consists in cutting the springs. This simple procedure, as you know, entails a decrease in the landing of the car (here, the main thing is not to overdo it). The vast majority of drivers who decide to complete replacement, prefers air suspension, which externally looks the same as in the first version. However, in practice, it allows you to move much more comfortably.

Internal tuning

Tuning the Nissan Almera Classic interior is an endless scope for design ideas. It’s worth starting with the fact that the driver can change absolutely everything here. The transformation begins most often with a new upholstery. For example, an unusual and very stylish solution is to use mostly light colors in contrast with dark accents. Moreover, you can completely replace all the furniture and upholstery of the cabin, radically changing the interior of the car.

Changes frequently and dashboard. This is expressed in the replacement of dials, lights, arrows and limiters. Special attention give the console, because it is central to the front of the car. You can change the style of the gear lever, audio system, and even each of the switches.

A great idea would be to create a kind of composition based on a harmonious combination of shades.

Conclusion

Tuning Nissan Almera Classic allows you to transform the classic exterior and interior design, create your own image of the car. Almost any detail can be improved or decorated both with your own hands and with the help of specialists, while the desire and imagination of the owner of the car are important.