Self-propelled vehicle technical condition certificate. On the technical inspection of self-propelled vehicles and other types of equipment registered by the bodies exercising state supervision over their technical condition. In what cases is the document formed?

REGULATIONS

CARRYING OUT A TECHNICAL INSPECTION OF SELF-PROPELLED VEHICLES AND OTHERS

TYPES OF TECHNOLOGY REGISTERED BY AUTHORITIES IMPLEMENTING

STATE SUPERVISION OF THEIR TECHNICAL CONDITION

1. These Rules establish the procedure and frequency of technical inspection of self-propelled machines and other types of equipment registered by the bodies exercising state supervision over their technical condition(hereinafter referred to as state technical supervision bodies).

In these Rules under self-propelled vehicles and other types of equipment (hereinafter referred to as machines) mean tractors, self-propelled road construction and other machines, with the exception of wheeled off-road motor vehicles that have an engine internal combustion volume of more than 50 cubic meters. centimeters or an electric motor with a maximum power of more than 4 kilowatts, trailers for them.

2. Technical inspection machines are organized and carried out by the state technical supervision authorities.

3. For the issuance of documents on the passage of technical inspection of machines, a state fee is charged in the amount and in the manner established by law Russian Federation about taxes and fees.

4. For machines of certain types, when carrying out their technical inspection, the requirements (including parameters) are imposed on the machines of certain types during the technical inspection, according to the appendix (hereinafter referred to as safety requirements).

5. Machines are subject to technical inspection at the following intervals:

a) off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat - every 6 months;

b) other machines - annually.

6. The first technical inspection of machines is carried out immediately after their registration by the state technical supervision authorities.

For cars that have not been in operation for more than one year from the date of manufacture (with the exception of off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat), the first technical inspection is carried out without checking their technical condition. with the issuance of a certificate of passing the technical inspection provided for in paragraph 12 of these Rules.

Subsequent technical inspections of machines are carried out (at the option of the owner of the machine):

at the place, on the day and at the time determined by the state technical supervision body of the constituent entity of the Russian Federation based on the frequency of technical inspection of machines established by these Rules, the number of machines registered by the said body, their location, seasonality of use and the availability of space for technical inspection. This information is posted on the official website of this body in the information and telecommunications network "Internet";

at the location of the state technical supervision body, regardless of the place of registration of machines on the day and time agreed with the specified body.

7. Carrying out technical inspection includes:

a) checking the availability of the documents provided for in paragraph 8 of these Rules, as well as information on the payment of the state fee for the issuance of a document on the passage of a technical inspection of the machine;

b) verification of the conformity of the machines with the data specified in the submitted documents and the identification of the machines;

c) checking the technical condition of machines (except for machines in respect of which, in accordance with paragraph 6 of these Rules, the first technical inspection is carried out without checking their technical condition);

d) preparation of documents for passing the technical inspection.

8. To undergo a technical inspection of the car, the owner of the car or his representative (hereinafter referred to as the applicant) submits the car and the following documents:

a) an identity document of the applicant;

b) a power of attorney or other document confirming the authority of the representative of the owner of the car (for the representative of the owner of the car);

c) a document confirming the applicant's right to drive a machine presented for a technical inspection;

d) certificate of registration of the machine;

9. Information about the payment of the state duty for the issuance of a document on the passage of the technical inspection of the machine is received by the state technical supervision body using unified system interdepartmental electronic interaction.

A document confirming the payment of the specified state fee may be submitted to the state technical supervision authority by the applicant on his own initiative.

10. In case of failure to submit the documents provided for in paragraph 8 of these Rules in full, or the absence of information on the payment of the state duty for the issuance of a document on the passage of a technical inspection of the machine, or the machine does not comply with the data specified in the submitted documents, the technical condition of the machine is not checked and a technical inspection report is drawn up, provided for in paragraph 12 of these Rules.

11. Technical diagnostics is carried out by methods of visual, organoleptic control with the use of technical diagnostics, including mobile means.

The main specifications and lists of means of technical diagnostics are approved by the Ministry of Agriculture of the Russian Federation.

12. Based on the results of the technical inspection of the machine, one of the following documents on the passage of the technical inspection is drawn up:

A) certificate of technical inspection (if the machine meets safety requirements);

b) a technical inspection report (if the machine is found to be inconsistent with any of the safety requirements, as well as in the cases provided for in paragraph 10 of these Rules).

13. The certificate of technical inspection is valid for:

off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat - within 6 months from the date of issue;

GOVERNMENT OF THE RUSSIAN FEDERATION

RESOLUTION

In accordance with Article 2 of the Federal Law "On Technical Inspection of Vehicles and on Amendments to Certain Legislative Acts of the Russian Federation" the Government of the Russian Federation

decides:

1. Approve the attached:

Rules for the technical inspection of self-propelled vehicles and other types of equipment registered by the bodies exercising state supervision over their technical condition;

changes that are made to the acts of the Government of the Russian Federation.

2. Establish that the technical inspection of off-road wheeled motor vehicles registered by the bodies exercising state supervision over their technical condition is carried out in accordance with the Rules for the technical inspection of vehicles approved by the Decree of the Government of the Russian Federation of December 5, 2011 N 1008.

3. To declare invalid:

Resolution of the Government of the Russian Federation of February 19, 2002 N 117 "On the procedure for conducting a state technical inspection of tractors, self-propelled road-building and other machines and trailers for them, registered by the state supervision bodies for the technical condition of self-propelled vehicles and other types of equipment in the Russian Federation" ( Collected Legislation of the Russian Federation, 2002, N 8, Article 846);

Clause 5 of amendments and additions to the acts of the Government of the Russian Federation on the provision of compulsory insurance of civil liability of vehicle owners, approved by the Government of the Russian Federation of May 7, 2003 N 265 "On amendments and additions to the acts of the Government of the Russian Federation on security compulsory insurance of civil liability of vehicle owners "(Collected Legislation of the Russian Federation, 2003, No. 20, Article 1899).

4. To establish that the documents on passing the state technical inspection, issued in relation to tractors, self-propelled road-building and other machines that have an internal combustion engine with a volume of more than 50 cubic meters. centimeters or an electric motor with a maximum power of more than 4 kilowatts, trailers for them and which are registered by the authorities exercising state supervision over the technical condition of self-propelled vehicles and other types of equipment, prior to the entry into force of this resolution, are valid until the expiration of the validity period specified in them.

5. The Ministry of Agriculture of the Russian Federation shall approve guidelines for the application of the Rules approved by this Resolution.

Prime Minister
Russian Federation
D. Medvedev

Rules for the technical inspection of self-propelled vehicles and other types of equipment registered by the bodies exercising state supervision over their technical condition

APPROVED BY
government decree
Russian Federation
dated November 13, 2013 N 1013

1. These Rules establish the procedure and frequency of technical inspection of self-propelled machines and other types of equipment registered by bodies exercising state supervision over their technical condition (hereinafter referred to as state technical supervision bodies).

In these Rules, self-propelled vehicles and other types of equipment (hereinafter referred to as machines) mean tractors, self-propelled road-building and other machines, with the exception of wheeled off-road motor vehicles that have an internal combustion engine with a volume of more than 50 cubic meters. centimeters or an electric motor with a maximum power of more than 4 kilowatts, trailers for them.

2. Technical inspection of machines is organized and carried out by the state technical supervision authorities.

3. For the issuance of documents on passing the technical inspection of machines, a state duty is levied in the amount and in the manner established by the legislation of the Russian Federation on taxes and fees.

5. Machines are subject to technical inspection at the following intervals:

a) off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat - every 6 months;

b) other machines - annually.

6. The first technical inspection of machines is carried out immediately after their registration by the state technical supervision authorities.

For cars that have not been in operation for more than one year from the date of manufacture (with the exception of off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat), the first technical inspection is carried out without checking their technical condition. with the issuance of a certificate of passing the technical inspection provided for in paragraph 12 of these Rules.

Subsequent technical inspections of machines are carried out (at the option of the owner of the machine):

at the place, on the day and at the time determined by the state technical supervision body of the constituent entity of the Russian Federation based on the frequency of technical inspection of machines established by these Rules, the number of machines registered by the said body, their location, seasonality of use and the availability of space for technical inspection. This information is posted on the official website of this body in the information and telecommunications network "Internet";

at the location of the state technical supervision body, regardless of the place of registration of machines on the day and time agreed with the specified body.

7. Carrying out technical inspection includes:

b) verification of the conformity of the machines with the data specified in the submitted documents and the identification of the machines;

d) preparation of documents for passing the technical inspection.

8. To undergo a technical inspection of the car, the owner of the car or his representative (hereinafter referred to as the applicant) submits the car and the following documents:

a) an identity document of the applicant;

b) a power of attorney or other document confirming the authority of the representative of the owner of the car (for the representative of the owner of the car);

c) a document confirming the applicant's right to drive a machine presented for a technical inspection;

d) certificate of registration of the machine;

e) insurance policy of compulsory insurance of civil liability of the owner vehicle(in cases where the obligation to insure the civil liability of the vehicle owner is established by federal law).

9. Information about the payment of the state duty for the issuance of a document on the passage of a technical inspection of the machine is received by the state technical supervision body using a unified system of interdepartmental electronic interaction.

A document confirming the payment of the specified state fee may be submitted to the state technical supervision authority by the applicant on his own initiative.

10. In case of failure to submit the documents provided for in paragraph 8 of these Rules in full, or the absence of information on the payment of the state duty for the issuance of a document on passing the technical inspection of the machine, or the machine does not comply with the data specified in the submitted documents, the technical condition of the machine is not checked and a technical inspection report is drawn up, provided for in paragraph 12 of these Rules.

11. Technical diagnostics is carried out by methods of visual, organoleptic control with the use of technical diagnostics, including mobile means.

The main technical characteristics and lists of means of technical diagnostics are approved by the Ministry of Agriculture of the Russian Federation.

12. Based on the results of the technical inspection of the machine, one of the following documents on the passage of the technical inspection is drawn up:

a) certificate of technical inspection (if the machine meets safety requirements);

b) a technical inspection report (if the machine is found to be inconsistent with any of the safety requirements, as well as in the cases provided for in paragraph 10 of these Rules).

13. The certificate of technical inspection is valid for:

off-road vehicles intended for the carriage of passengers and having more than 8 seats in addition to the driver's seat - within 6 months from the date of issue;

the rest of the machines - during the calendar year.

In case of loss or damage of the certificate of passing the technical inspection during its validity period, the corresponding duplicate is issued by the state technical supervision body that issued the specified certificate, at the request of the owner of the machine or his representative after the state technical supervision body receives information about the payment of the state duty in the manner prescribed by paragraph 9 of these Rules.

The form of the certificate of passing the technical inspection is a document of strict reporting and protected printing products of the "B" level.

The form of the certificate of completion of the technical inspection, as well as the procedure for filling it out, storing and destroying it, are approved by the Ministry of Agriculture of the Russian Federation.

14. If a non-compliance of the machine with any of the safety requirements is revealed, the technical inspection report shall indicate the parameters of the machine in relation to which such a non-compliance has been established.

The form of the technical inspection certificate and the procedure for filling it out are approved by the Ministry of Agriculture of the Russian Federation.

15. The machine, in respect of which a technical inspection certificate has been issued, is subject to a repeated technical inspection.

When a car is presented for a repeated technical inspection within 20 days from the date of issuing a technical inspection certificate containing information about the machine's non-compliance with any of the safety requirements to the state technical supervision body that issued such an act, the technical condition of the machine is checked only in relation to those specified in this act machine parameters for which such a discrepancy was established.

Appendix to the Rules. Requirements (including parameters) for certain types of machines during technical inspection

Appendix
to the Rules for conducting technical
inspection of self-propelled vehicles and other
types of equipment registered
bodies implementing
state supervision of their
technical condition

I. Braking systems

1. Braking systems must comply with the braking performance and stability of the vehicle during braking:

a) for tractors and self-propelled machines - in accordance with paragraph 3.17 of GOST 12.2.019;

b) for small tractors - in accordance with paragraph 4.20 of GOST 12.2.140;

c) for trailers and tractor semitrailers - in accordance with paragraph 5.5 of GOST R 52746;

d) for self-propelled road-building machines - in accordance with paragraphs 4.3-4.5 of GOST R ISO 3450;

e) for forestry and forestry wheeled tractors, forestry and forestry wheeled vehicles - in accordance with clauses 7.5 and 7.6 of GOST R ISO 11169;

f) for forestry and forestry tracked tractors, logging and forestry tracked vehicles- according to clauses 6.1.1 and 6.1.2 of GOST R ISO 11512;

g) for snowmobiles - in accordance with paragraph 5.3 of GOST R 50944;

h) for snow and swamp-going vehicles - in accordance with paragraph 5.3 of GOST R 50943;

i) for loaders, stackers - in accordance with paragraphs 3.2 and 4.1 of GOST R 51348.

2. The working braking system of tractor trains with a pneumatic brake drive in the emergency (automatic) braking mode must be operable.

3. Leakage compressed air from joints and elements of the brake system is not allowed.

4. Leakage brake fluid and (or) violation of the tightness of pipelines or connections in the hydraulic brake drive is not allowed.

5. Corrosion threatening loss of tightness or destruction is not allowed.

6. Mechanical damage to brake lines is not allowed.

7. The presence of parts with cracks or permanent deformation in the brake drive is not allowed.

8. Means of signaling and control braking systems, the pressure gauges of the pneumatic and pneumohydraulic brake drive and the fixing device for the parking brake control must be functional.

9. Swelling of brake hoses under pressure and (or) the presence of cracks on them and visible places of rubbing are not allowed.

10. The location and length of the connecting hoses of the pneumatic brake drive of tractor trains must exclude their damage during the mutual movement of the tractor and trailer (semitrailer).

II. Steering

11. The change in effort when turning the steering wheel should be smooth over the entire range of its steering angle. Inoperability of the power steering (if any) is not allowed.

12. Spontaneous rotation of the steering wheel with the power steering from the neutral position with the engine running is not allowed.

13. Total backlash in the steering control must not exceed the limit values set by the manufacturer in the operating documentation, or in the absence of data set by the manufacturer, the following limit values:

for tractors, including small-sized ones, and self-propelled agricultural machines - no more than 25 degrees;

for snowmobiles and snow and swamp-going vehicles - no more than 15 degrees.

14. Damage and absence of fastening parts of the steering column and steering mechanism housing, as well as an increase in the mobility of parts of the steering drive relative to each other or the body (frame), not provided for by the manufacturer (in the operating documentation), are not allowed. Threaded connections must be tightened and secured in the manner specified by the manufacturer. Backlash in the joints of the pivot pins and the steering rod joints is not allowed. The device for fixing the position of the steering column with an adjustable position of the steering wheel must be functional.

15. The use of parts with traces of permanent deformation, cracks and other defects in the steering mechanism and steering drive is not allowed.

16. The maximum angle of rotation of the steering wheel (steering wheel) should be limited only by devices provided for the design of the machine.

III. Control mechanism of machines on caterpillar tracks

17. The free play of the handles of the control levers of the slewing clutches must not deviate from the values admitted by the manufacturer.

18. It must be ensured that the power flow is completely interrupted in the direction of the turn when the control lever is fully moved towards itself.

19. The free travel of the brake pedals must not exceed the values specified by the manufacturer.

20. Different amounts of free travel of the brake pedals are not allowed.

IV. External lighting devices

21. The use of lighting and light signaling devices is determined by:

a) for agricultural and forestry tractors - GOST R 41.86;

b) for small tractors - clauses 8.2 and 8.3 of GOST 12.2.140;

c) for self-propelled agricultural machines - paragraph 8.6 of GOST 12.2.019;

d) for trailers and tractor semitrailers - GOST 8769;

e) for snowmobiles - paragraphs 5.2.21 and 5.2.22 of GOST R 50944;

f) for snow and swamp-going vehicles - paragraphs 5.2.21 and 5.2.22 of GOST R 50943.

22. Destruction and absence of diffusers of lighting devices or the use of diffusers and lamps that do not correspond to the type of this lighting device are not allowed.

23. Braking signals (main and additional) must be switched on when the controls of the working and emergency braking systems are affected and operate in a constant mode.

24. Installation of light devices with red lights or red reflectors in front of the car, and white at the back, except for lanterns reverse and lighting registration plate, not allowed.

25. On machines performing construction, repair or maintenance of roads, as well as on machines moving on public roads at a speed of 20 km / h or more and having a width of more than 2.55 meters, special light signals should be installed (flashing beacons ) yellow or orange. The number and location of flashing beacons should ensure their 360 degree visibility in a horizontal plane passing through the center of the light emitting source.

V. Windscreen wipers and washers

26. Cars with a cab must be equipped with at least one windshield wiper.

27. The use of windshield wipers and washers for agricultural and forestry tractors, self-propelled agricultural machines must comply with paragraphs 4.1 and 4.2 of GOST 12.2.120.

28. Screen wipers and washers must be functional.

29. The windscreen washer must provide fluid supply to the glass cleaning area.

Vi. Wheels, tires and tracks

30. The tires of the wheels must have a residual height of the stars (tread pattern):

a) driving wheels:

not less than 5 mm - for tractors of the class up to 2 tons inclusive;

b) steered wheels:

not less than 2 mm - for tractors of the class up to 2 tons inclusive;

not less than 10 mm - for tractors of class 3 tons and above;

c) trailer wheels - not less than 1 mm.

31. Tires should not have external damage (holes, cuts, breaks), exposing the cord, carcass delamination, tread and sidewall delamination.

32. The absence of at least one bolt or nut for fastening the disks and wheel rims is not allowed.

33. The presence of cracks on the disks and rims of the wheels, as well as traces of their elimination by welding is not allowed.

34. A visible violation of the shape and (or) dimensions of the mounting holes in the wheel rims is not allowed.

35. Tires by size or permissible load must match the machine model.

36. Installation of tires of different sizes, designs, models, with different tread patterns on one axle is not allowed.

37. The pressure in the tires must not exceed the values indicated in the marking of the tires. The pressure difference in the left and right tires should be no more than 0.01 MPa (0.1 kgf / cm).

38. The sag of the caterpillar chains of machines on caterpillar tracks should not exceed the value provided by the manufacturer, and if there is no such value, it should not exceed 65 mm.

39. Residual height the ground wheels of caterpillar machines must be at least 7 mm.

40. The number of links in the left and right track chains must be the same.

41. The presence of cracks and kinks in the links of the caterpillar chain is not allowed.

42. The difference between the slack of the left and right track chains should not exceed the value provided by the manufacturer, and if there is no such value, it should not exceed 5 mm.

Vii. Engine and its systems

43. The smoke level of exhaust gases for tractors, self-propelled road-building and other self-propelled vehicles with diesel engines must comply with GOST R 17.2.2.02.

46. Leakage and dropping of fuel in the power supply system of gasoline and diesel engines not allowed.

47. Fuel tank shut-off devices and fuel shut-off devices must be functional.

48. The power supply system of machines, designed to operate on a compressed natural gas, liquefied natural gas and liquefied petroleum gas must be sealed. On the outer surface of gas cylinders of machines equipped with such a power system, their passport data must be applied, including the date of the current and subsequent survey. The use of gas cylinders with the expired period of their periodic examination is not allowed.

49. Engine exhaust systems must be in good working order and complete.

VIII. Other structural elements

50. Tractors and self-propelled road-building machines must be equipped with rear-view mirrors on the left and right.

Snowmobiles (except for S1 category snowmobiles in accordance with GOST R 50944) must be equipped with a rear-view mirror. Mirrors installed on snowmobiles must comply with the requirements of paragraph 5.4.2 of GOST R 50944.

Snow and swamp-going vehicles (except for snow and swamp-going vehicles of category SB1 in accordance with GOST R 50943) must be equipped with a rear-view mirror. Mirrors installed on snow and swamp-going vehicles must comply with the requirements of paragraph 5.4.2 of GOST R 50943.

51. The presence of cracks on the windshields in the area of cleaning half of the glass by the wiper located on the driver's side is not allowed.

52. Cab door locks, adjustment mechanisms and fixing devices for the driver's seats, heating and blowing the windshield provided by the design must be operational.

53. The locks of the sides of the loading platform of trailers and semi-trailers must be operable.

54. Emergency exits and devices for activating them, interior lighting devices in the cab must be operational.

55. Provided by the design self-propelled machines, sound signals must be in good working order.

The sound signal, when actuating its control, should emit a continuous and monotonous sound.

The sound level of the signal should be within 90-112 dBA with the engine off.

56. Trailers and semi-trailers shall be fitted with rear protective devices provided for in the design.

57. Tractor trailers and semi-trailers must be equipped with functional safety devices (chains, ropes). The length of the safety chains (cables) must prevent contact of the drawbar eyelet with the road surface and at the same time ensure the trailer control in the event of a break (breakdown) of the towing hitch.

58. Trailers (with the exception of uniaxial and dismantling) must be equipped with a device that supports the drawbar hitching eye in a position that facilitates hitching and uncoupling from the traction machine.

59. Deformation of the hitching eye or drawbar of the trailer, violating their position relative to the longitudinal central plane of symmetry of the trailer, breaks, cracks and other visible damage to the hitching eye or drawbar of the trailer are not allowed.

60. Machines must be equipped with safety belts provided for in the design. Seat belts must be free of the following defects:

a) a tear on the strap, visible to the naked eye;

b) the lock does not fix the "tongue" of the strap or does not throw it out after pressing the button of the locking device;

c) the strap is not pulled out or pulled into the retractor (coil);

d) when abruptly pulling the belt strap, it is not ensured that it stops (blocking) its pulling out of the retractor (coil).

61. Tractors, self-propelled road construction, self-propelled agricultural vehicles, trailers and semi-trailers must be equipped with at least 2 wheel chocks.

62. Self-propelled vehicles must be equipped with at least one powder or freon fire extinguisher with a capacity of at least 2 liters.

The fire extinguisher must be sealed, and it must indicate the expiration date, which at the time of inspection must not be completed.

63. Batteries, seats, as well as fire extinguishers and a first-aid kit on tractors, self-propelled road-building machines, equipped with devices for their fastening, must be securely fixed in the places provided for by the design.

64. Wheeled tractors and machines must be equipped with wheel fenders. The width of these devices must be at least the width of the tires used.

65. The absence of dirt-protecting aprons and mudguards provided for by the design of the machines is not allowed.

66. Retainers transport position semi-trailer supports, designed to prevent their spontaneous lowering during movement, must be operable.

67. Leakage of oils and working fluids from the engine, gearbox, final drives, axles, clutch, battery, cooling and air conditioning systems and additionally installed hydraulic devices is not allowed.

68. The device provided for by the design of a self-propelled machine, which excludes the possibility of starting the engine when the gear is engaged, must be operable.

69. Increased movement in movable interfaces of machines is not allowed.

70. The moving (rotating) parts of the machines (cardan, chain, belt, gear drives, etc.) must be protected by protective covers.

71. The loosening of the fastening of the cab, engine, compressor, starting engine, cladding, working bodies, and other structural elements is not allowed.

72. Levers for controlling the working bodies of machines and implements in the given positions must be secured with reliable fixation.

73. Installation of additional items or application of coatings restricting the view from the driver's seat, impairing the transparency of the glass, entailing the risk of injury, is not allowed.

Transparent colored films can be attached to the top of the windshield of the machine. It is allowed to use tinted glass (except for mirror glass), the light transmission of which meets the requirements of GOST 5727.

74. Substitution rechargeable batteries, used to start the engine of the machine, as well as batteries of machines with an electric drive, batteries, the voltage, weight or dimensions of which differ from those provided by the manufacturer, are not allowed.

75. The devices provided for by the design, preventing the spontaneous start of the working bodies of the machines, must be operable.

76. Safety couplings of the drive of the working bodies of the machines must be in good order and adjusted.

77. The devices for emergency shutdown of working bodies provided for by the design must be operable.

78. The devices provided for by the design for the removal of static electric charge must be operable.

79. Unbalance of rotating parts of machines exceeding the values set by the manufacturer is not allowed.

80. Self-propelled vehicles must be equipped with an emergency stop sign.

81. Cars must have a state registration plate at the rear.

The state registration plate must be installed on a flat vertical surface, while obstructing the state registration plate with structural elements must be excluded, and the state registration plate must not cover external light and signal devices and protrude beyond the side clearance.

The state registration plate must be installed along the axis of symmetry of the machine or to the left of it in the direction of movement of the machine.

82. On wheeled tractors class 1.4 and higher, working with trailers, the sign "Road train" must be installed.

83. Self-propelled vehicles with a maximum design speed of not more than 30 km / h must have a "Slow-moving vehicle" sign.

APPROVED BY
government decree
Russian Federation
dated November 13, 2013 N 1013

Changes to be made to the acts of the Government of the Russian Federation

1. Clause 2 of the Rules for the technical inspection of vehicles approved by the decree of the Government of the Russian Federation of December 5, 2011 N 1008 "On the conduct of technical inspection of vehicles" (Collected Legislation of the Russian Federation, 2011, N 50, Article 7397; 2013, N 16 , Article 1975), supplemented with the words "unless otherwise established by acts of the Government of the Russian Federation."

2. Clause 5 of the Decree of the Government of the Russian Federation of April 17, 2013 N 348 "On technical inspection of vehicles of bodies carrying out operational-search activities" (Collected Legislation of the Russian Federation, 2013, N 16, Article 1975) shall be excluded.

Electronic text of the document
prepared by Kodeks CJSC and verified by:
Collection of legislation
Russian Federation,
N 47, 25.11.2013, article 6099

Electronic services

Full name of the service

Technical inspection of self-propelled vehicles and other types of equipment registered by the bodies exercising state supervision over their technical condition in the city of Moscow

Conditions for obtaining services on the site

Who can apply for the service
- Individuals who own a self-propelled vehicle on the basis of ownership or other legal grounds, regardless of the place of registration of the self-propelled vehicle, which is located within the territory of the city of Moscow.
- (The interests of the applicants can be represented by persons authorized by the applicants in the manner prescribed by law)
- Individual entrepreneurs who own a self-propelled vehicle on the basis of ownership or other legal grounds, regardless of the place of registration of the self-propelled vehicle, which is located within the territory of the city of Moscow.
  (The interests of the applicants can be represented by persons authorized by the applicants in the manner prescribed by law)
Service cost

For the issuance of a document confirming the passage of a technical inspection - 400.0 rubles

List of required documents

information about the identity document of the applicant;
information about the certificate of registration of the machine;
information about the document confirming the right to drive a self-propelled machine presented for passing MOT (certificate of a tractor driver-driver (tractor driver) of the corresponding category);
information about the insurance policy of compulsory civil liability insurance of the vehicle owner (in cases where the obligation to insure the civil liability of the vehicle owner is established by federal legislation) (with the attachment of an electronic image of the document);
an electronic image of a document confirming the authority of the applicant's representative to act on behalf of the applicant (in the case of applying for the provision of public services by the applicant's representative), certified by an electronic signature;
an electronic image of a document confirming the payment of the state fee (can be added at the initiative of the applicant).

Terms of service

5 working days
The result of the service
- certificate of completion of maintenance;
- technical inspection report;
- a decision to refuse to provide a public service.

Conditions for obtaining a service at the IIV

Who can apply for the service:

Individuals
Individuals who own a self-propelled vehicle on the basis of ownership or other legal grounds, regardless of the place of registration of the self-propelled vehicle, which is located within the territory of the city of Moscow. Submission of an application for the provision of a public service is carried out exclusively in paper form if the owners of self-propelled vehicles are persons under the age of 18.

Legal entities
Legal entities, foreign representations and firms that own a self-propelled vehicle on the basis of ownership or other legal grounds, regardless of the place of registration of the self-propelled vehicle, which is located within the territory of the city of Moscow.

Individual entrepreneur
Individual entrepreneurs registered at the place of residence in the city of Moscow or at the place of residence in the city of Moscow (for the period of temporary residence), who own a self-propelled car or use self-propelled cars under a lease agreement. The interests of the applicants can be represented by persons authorized by the applicants in the prescribed manner.
Service cost and payment procedure:

For the issuance of a document confirming the passage of a technical inspection - 400.0 rubles.
For the provision of public services in accordance with the Tax Code of the Russian Federation, a state duty is charged. The size of the state duty, depending on the type of registration action, is indicated on the information and telecommunication website of the Association of Administrative and Technical Inspections of the City of Moscow
List of required information:

Application for the provision of public services (for individuals) (original, 1 pc.)
- Required
- Provided with no return
From December 4, 2017 acceptance of applications and other documents necessary for the provision of public services is carried out exclusively in electronic form using the Portal of State and Municipal Services (Functions) of the city of Moscow (hereinafter referred to as the Portal), except when submitting applications and other documents necessary for the provision of public services , is carried out on paper if the owners of self-propelled vehicles are persons under the age of 18.
Application for the provision of public services (for legal entities) (original, 1 pc.)
- Required
- Provided with no return
From December 4, 2017 acceptance of applications and other documents necessary for the provision of public services is carried out exclusively in electronic form using the Mos.ru Portal, except for the case when the owners of self-propelled vehicles are persons under the age of 18. In this case, the submission of applications and other documents required for the provision of the service is carried out on paper.
Applicant's identity document (original, 1 pc.)
- Required
Document confirming the authority of the applicant's representative to act on behalf of the applicant (original, 1 pc.)
- Required
- Provided only for viewing (making a copy) at the beginning of the service
Submitted in case of application for the provision of public services by the applicant's representative.
Vehicle registration certificate (original, 1 pc.)
- Required
- Provided only for viewing (making a copy) at the beginning of the service
Document confirming the right to drive a self-propelled vehicle presented for the maintenance of a self-propelled vehicle (original, 1 pc.)
- Required
- Provided only for viewing (making a copy) at the beginning of the service
A certificate of a tractor driver (tractor driver) of the corresponding category is presented.
Insurance policy of compulsory civil liability insurance of the vehicle owner (copy, 1 pc.)
- Required
- Provided only for viewing (making a copy) at the beginning of the service
Submitted in cases where the obligation to insure the civil liability of the vehicle owner is established by federal law.
Terms of service

5 working days

Suspension period: 14 working days
The grounds for the suspension of the provision of public services are:

1. Waiting for the appointed date of submission of the self-propelled vehicle (s) for maintenance.

The period for the suspension of the provision of public services is provided from the moment the applicant chooses the date and time for the maintenance of the self-propelled vehicle at the site of the State Technical Supervision of the city of Moscow until the agreed date for maintenance of the self-propelled vehicle and does not exceed 14 working days.

2. The need to eliminate the malfunction of the self-propelled vehicle and submit an application for re-maintenance of the self-propelled vehicle within 20 days from the date of registration of the certificate of technical inspection on the basis of the Administrative Regulations for the provision of the service.
The result of the service

Issued by:
- Technical inspection certificate (original, 1 pc.)
- Decision to refuse to provide public services (original, 1 pc.)
  Signed by an authorized official and issued to the applicant indicating the reasons for the refusal.
- Technical inspection certificate (original, 1 pc.)
Happens:
- Entering information into an automated information base (New entry in registers, cadastres, registers)
Forms of receipt

Through a legal representative

On the WEB site

About the Rules road traffic No. 1090. Resolution from 1993-10-23

About acceptance technical regulations Customs Union "On the safety of agricultural and forestry tractors and trailers to them" No. 60. Decision of 2012-07-20, NLA, directly regulating the provision of GU

Grounds for refusal to accept documents

The grounds for refusing to accept documents required for the provision of public services are:

1. The submitted application and documents for the provision of public services do not comply with the Uniform Requirements, the Administrative Regulations for the Provision of Services or other regulatory legal acts.

2. Submission of an application on behalf of the applicant by an unauthorized person.

3. Application for the provision of a public service of a person who is not a recipient of a public service in accordance with the Administrative Regulations for the provision of services .

4. The applicant's application for a public service, the provision of which is not carried out by the Moscow State Technical Inspection.

5. The applicant has submitted an incomplete set of documents provided for by the Administrative Regulations for the provision of services as documents that must be submitted by the applicant.

6. The submitted documents contain false and (or) contradictory information.

7. The submitted documents are no longer valid (this basis applies in cases of expiration of the document, if the validity period of the document is specified in the document itself or is determined by legislation, as well as in other cases stipulated by the legislation of the Russian Federation, legal acts of the city of Moscow).

8. The self-propelled vehicle specified in the application is not registered in the established manner by the state technical supervision authorities.

Additional grounds for refusing to accept documents required for the provision of a public service when providing services in electronic form using the Portal are:

1. Incorrect filling of required fields in the online application form.

2. Documents in electronic form are signed using an electronic signature that does not belong to the applicant.

3. The presence of unreadable documents in electronic copies of documents sent in electronic form using the Portal.

Grounds for refusal to provide services

The grounds for refusing to provide a public service are:

1. Failure to submit a self-propelled vehicle for maintenance.

2. Detection of signs of falsification of documents, state registration plates, changes in the factory marking of machines if the numbers of the units do not match the submitted documents or registration data, as well as confirmation from the authorized bodies of information about the location of the machines (numbered units) or submitted documents on the wanted list.

3. Presentation of a self-propelled vehicle for maintenance by an unauthorized person.

4. Failure to comply with the requirements of the Moscow State Technical Inspection for the equipment of the place (site) for carrying out maintenance of a self-propelled vehicle in accordance with Appendix 4 to the Administrative Regulations for the provision of public services.

5. Receipt of decisions of authorized representatives of the Moscow State Technical Inspection government agencies on the suspension (prohibition) of the performance of legally significant actions with the self-propelled vehicle and its use.

Additional grounds for refusing to provide a public service in case of sending an application in electronic form using the Portal are:

1. The expiration of the period during which the applicant should have chosen the date and time for the maintenance of the self-propelled vehicle at the site of Gostekhnadzor of the city of Moscow.

2. The applicant's disagreement with the proposed conditions for the departure of the state inspector-engineer of Gostekhnadzor of the city of Moscow to carry out maintenance of the self-propelled vehicle (s), provided for in Appendices 4 and 5 to the Administrative Regulations for the provision of public services, as well as the date and time of maintenance.

3. The presence of conflicting information in the online statement and documents obtained using interagency information interaction.

(Gostekhnadzor of the city of Moscow)

Andrey-249

Hello! If the technical inspection coupon is expired, then an interesting situation turns out: to undergo a technical inspection you need an MTPL policy, and to get a MTPL you need a valid MTPL certificate. Vicious circle. How to be? How to live further?

Andrey, Hello.

In this case, everything is simple:

1. Purchase a temporary MTPL for driving to the place of passing the inspection (inspection is not required for it).

2. Get a checkup.

3. Buy OSAGO.

Good luck on the road!

Alexey-303

Not any vicious circle, the policy is purchased before passing MOT, according to FZ-40 on civil liability insurance.

Alexander-571

Tell me, they hung the number on the loader. We made two additional holes in the corners for fastening. Are sanctions from the inspector possible?

Alexander, holes are made in the room? Or in the back of a vehicle?

Alexey-386

Good afternoon! The inspector requires the legal entity to provide all agricultural equipment that is on the balance sheet for a technical inspection, even the one that is not working. Does a legal entity have the right to provide equipment at its discretion and on what basis?

Alexei, Hello.

And on what basis does the inspector demand this from you? Did he give you a written order?

Alexey-386

Warning

on the inadmissibility of violation of mandatory requirements

It was found that in accordance with the schedule for the 2018 technical inspection of self-propelled vehicles and other types of equipment in the urban district - the city of Kamyshin and the Kamyshinsky municipal district, approved by the chairman of the agriculture committee Volgograd region and posted on the official portal of the Governor and the Administration of the Volgograd Region, on March 12, 2018, a technical inspection of self-propelled vehicles and other types of equipment registered for ______________________ took place. Based on the results of the technical inspection, 17 units of self-propelled vehicles and trailers to them were not submitted for inspection, according to Appendix No. 1.

This fact violates Part 1 of Article 17 of the Federal Law "On Road Safety" of December 10, 1995 N 196-FZ and paragraph 5 of the Rules for the technical inspection of self-propelled vehicles and other types of equipment, registered by the bodies exercising state supervision over their technical condition, approved Decree of the Government of the Russian Federation of 13.11.2013, No. 1013. In this regard, it is necessary to submit for technical inspection self-propelled vehicles and trailers to them, in accordance with Appendix No. 1:

Thus, guided by Parts 1 and 2 of Article 19 of the Federal Law "On Road Safety" dated December 10, 1995 N 196-FZ, we inform you that further operation of machines that have not passed the technical inspection is prohibited.

an indication of the mandatory requirements, including their structural units that provide for the specified requirements, information about what actions (inaction) of a legal entity, an individual entrepreneur lead or may lead to a violation of mandatory requirements

Based on Art. 8.2 and Art. 8.3 Federal Law

dated December 26, 2008 No. 294-FZ "On the protection of the rights of legal entities and individual entrepreneurs in the implementation of state control (supervision) and municipal control"

The institution has 17 pieces of equipment, but 9 of them are in good working order. The inspector refuses to inspect 9 units and demands that payment be made for all 17 units. What's the point in paying for equipment that is out of order

After that, the inspector will either inspect 9 vehicles or give you a written refusal. On its basis, it will be possible to write a complaint to the prosecutor's office.

Good luck on the road!

Good day, is it necessary to pass the inspection for new tractor?

Excavators underwent technical inspection in February 2018. We are selling them now. Will the new owner need to undergo technical inspection again in April 2018?

Oleg, Hello.

6. The first technical inspection of machines is carried out immediately after their registration by the state technical supervision authorities.

Those. technical inspection must be passed.

Good luck on the road!

This document states that the pledge of tractors can only be formalized in the state technical supervision authorities, i.e. the state technical supervision maintains a register of pledged vehicles. It can be concluded that when implementing registration actions the employees have information about the deposit.

Good luck on the road!

Alexander-708

Good afternoon. Passed the technical inspection did not pass, the inspector said for a second one it is necessary again to the state. pay the duty. Is he right or not.?

Inspection certificate for equipment, tractor, self-propelled vehicle, trailer. The main task of state supervision over the technical condition of self-propelled vehicles and other types of equipment in the Russian Federation (hereinafter referred to as the state technical supervision) is to supervise the technical condition of tractors, self-propelled road-building and other machines and trailers to them in the process of use in terms of ensuring safety for life , health of people and property, environmental protection, and in the agro-industrial complex - for the observance of the rules for the operation of machinery and equipment regulated by standards, other regulatory documents and documentation.

The number of state inspection engineers in state inspections for the supervision of the technical condition of self-propelled vehicles and other types of equipment is determined by the relevant executive authorities, taking into account the total power standards and the availability of controlled machinery and equipment and within the limits of the appropriations provided for these purposes.

In the case when the functions of supervision in the district (city) should be performed by one person, they are assigned to the chief state engineer-inspector.

State technical supervision bodies carry out:

supervision over the technical condition of tractors, self-propelled road-building and other machines and trailers to them in the process of use, regardless of their belonging (except for the machines of the Armed Forces and other troops of the Russian Federation, as well as the parameters of machines controlled by the Gosgortekhnadzor of Russia and Glavgosenergonadzor of Russia) according to the standards, ensuring safety for life, health of people and property, environmental protection;
supervision in the agro-industrial complex over the observance of the rules for the operation of machinery and equipment in terms of ensuring safety for life, health of people and property, environmental protection (except for the parameters controlled by the Gosgortechnadzor of Russia and Glavgosenergonadzor of Russia), as well as the rules regulated by standards, other regulatory documents and documentation ;
supervision in the agro-industrial complex over compliance with the established procedure for organizing and conducting certification of works and services in the field technical exploitation supervised machinery and equipment;
registration of tractors, self-propelled road-building and other machines and trailers to them, as well as the issuance of state registration plates for them (except for vehicles of the Armed Forces and other troops of the Russian Federation);
carrying out periodic state technical inspections and registration of the pledge of the cars registered by them;
taking exams for the right to drive self-propelled vehicles and issuing certificates of a tractor driver-driver (tractor driver);
issue educational institutions compulsory certificates of compliance with the requirements of the equipment and equipment of the educational process for consideration of the issue by the relevant authorities on accreditation and the issuance of licenses to these institutions for the right to train tractor drivers and drivers of self-propelled vehicles;
assessment of the technical condition and determination of the residual life of supervised machines and equipment at the request of owners, government and other bodies;
participation in commissions to consider claims of owners of supervised machines and equipment regarding the inadequate quality of sold or repaired equipment;
proceedings on cases of administrative offenses in accordance with the legislation of the Russian Federation;
control over the fulfillment by the owners of vehicles of the obligation to insure the civil liability of vehicle owners established by the legislation of the Russian Federation during the registration, organization and conduct of state technical inspection of vehicles and the exercise of other powers in the field of supervision of the technical condition of vehicles in the process of their use.

"___" _________ 20__

"___" h. "____" min.
(inspection time)

Place of inspection ______ (city, street, house number, name of the organization). I, the state engineer-inspector of Gostekhnadzor ____________ (name of the inspection, surname, name, patronymic of the inspector) made an inspection ___ (name of the object, manufacturer).

Brand ________________
Manufacturer ________________
Year of issue ________________
Main ved. bridge N ________________
Factory N ________________
Color ________________
Engine (model) ________________
Machine passport series _____ N _____
Engine N ________________
Testimonial about registration series _____ N _____
Box item N ________________
State register. sign series _____ N _____

service life ____ years (source of information; justification of the accepted data)
operating time ____ motorcycle hours (source of information, justification of the accepted data)
belonging to ________ (postal address of the owner, telephone; for legal entities - name, legal address, bank details)
proxy _________ (full name, power of attorney, number, date)

INSTALLED DURING INSPECTION:

__________ (technical condition is determined, compliance with the standard completeness, availability additional equipment and equipment, information on the repairs and replacements of the units, the nature and degree of damage to the damage is indicated).

Equipment inspection report drawn up by external inspection

The examination was attended by:

Vehicle owner _____ (signature) (full name) _____
Proxy _____ (signature) (full name) _____
Other interested parties _____ (signature) (full name) _____
State Inspector Engineer of Gostekhnadzor _____ (signature) (full name) _____