Mechanical KIA box The Sportage is a reliable unit. The developers have created it to work in gentle conditions:

• with careful driving;
• on smooth roads;
• when working in the speed modes calculated for the selected gear;
• under conditions of regular oil changes and preventive diagnostics.

With this use, the manual transmission serves for a long time and regularly, it works throughout the life of the car.

Manual transmission KIA Sportage 3, repair of transfer case, replacement of input shaft bearings

Repair of 6 speed manual transmission KIA Spotage III (2010-2015)

43222-3D100 Front input shaft bearing
43223-3D100 Rear input shaft bearing
43224-3D100 Output shaft bearing front
43225-3D100 Rear output shaft bearing
43215-3D300; 43221-3D021; 43293-3D020; 43230-3D020; 43283-3D040; 43290-3D020; 43240-3D020; 43280-3D040 Gearbox shaft

Problems with the gearbox manual transmission KIA Sportage

Getting into Russian conditions, even a new, and even more so used, car, as a rule, is deprived of the opportunity to work with the regime provided for it.

• Rough Russian roads
• Many hours of traffic jams, in which the box is involved almost continuously,
• Careless driving with a sharp shift of the lever and driving at the wrong speed,
• Untimely oil change and irregular diagnostics,

lead to the fact that the device or its individual parts are erased, broken and fail.

Kia sportage manual transmission repair

41100-3D000 clutch disc
42300-3D000 clutch basket
41421-32000, S4142132000 release bearing
432223D100 front input shaft bearing,
432233D100 rear input shaft bearing,
432243D100 output shaft bearing front,
432253D100 rear output shaft bearing.

• there is noise, rattle and howl in the box area;
• the lever is difficult to switch;
• transfers now and then knocks out.

In this situation, it is time to turn to a car service for professional help.

Professional assistance in the repair of manual transmission KIA Sportage

"MKPP Repair" specializes in the repair of foreign cars, namely, gearboxes, therefore it is equipped with the most modern equipment necessary for this. We do computer diagnostics boxes before and after the work, which allows not only to accurately determine the problem, but also significantly reduce the time for its elimination.

Repair of a manual transmission KIA Sportage, replacement of the fifth gear, input shaft

High-performance machines and hand tools also help to increase the efficiency of service delivery and reduce their cost.

An important role in the formation of the total cost of troubleshooting is played by the price of auto parts. We offer inexpensive accessories from our own store, where they are always in stock. As a result, by contacting us, you will receive a high professional level repair for a reasonable price.

Our masters always put the client's benefit at the forefront, therefore:

• we develop the most optimal repair plan;
• we take all actions only with the consent of the owner;
• we always offer preventive measures, such as replacing oil seals and O-rings, even if no faults are found.

Come to our workshop in Moscow on Kashirskoye shosse or in Vidnoye for repair and preventive maintenance of the box KIA gear sportage.

Manual transmission repair KIA Sportage 2.0 liter gasoline. Mileage 150,000 km. Replacing the input shaft, replacing the 5th gear, front input shaft bearing.

« kia sportage» 3 is one of the most popular crossovers in Russia. The car is famous for its reliability and unpretentiousness in maintenance. But in order for the units to serve for a long time (meaning the engine and gearbox), it is necessary to carry out periodic preventive maintenance, namely an oil change. Any car owner knows about the engine - this operation must be performed every 10 thousand kilometers. But not everyone knows about the checkpoint, especially the automatic one. But she also needs what to pour and how to change it at all? We will talk about this in our today's article.

Ways

Today, there are two methods for changing the oil in an automatic transmission:

· Partial. In this case, the operation involves only updating the fluid. This option is the easiest for owners of used cars (especially those whose car is no longer under warranty). The operation is performed independently, without the help of specialized tools. But, unfortunately, there are also disadvantages of a partial double replacement of ATF oil in automatic transmissions. Replacement does not guarantee that the fluid will be 100 percent new. The new ATP fluid will only partially mix with the old one. Therefore, such an operation is performed twice in one replacement schedule.

· Full. How is the oil change performed in the automatic transmission "Kia Sportage" 3? This method involves the use of a special washer. It is connected to the box through special hoses and pumps liquid under pressure. Old oil comes out. At the same time, new fluid is pumped into the system. Among the advantages of this method, it is worth noting the better maintenance of the automatic transmission. An automatic transmission oil change will not be required as often as in the case of a partial method. After all, the system is filled with 100 percent new fluid. But that's where all the pluses end. The main disadvantage of the method is that it cannot be repeated at home. Also, for a complete oil change in an automatic transmission with a Kia Sportage 3, much more ATP fluid will be required. And it's not cheap. Well, plus everything you need to pay for the work of the masters at the service station.

Which method is better to choose? If a do-it-yourself automatic transmission oil change is made on a Kia Sportage 3 car, a partial method is the only suitable option.

What to pour and how much?

What oil to use for the third generation Kia Sportage automatic transmission? Experts recommend using original oil Hyundai SP-4 or Castrol Transmax E. As analogues, you can consider "Shell Spirax S4" and "Zik ATF S4". Good reviews are received by products from Allison. For Kia Sportage, Allison C4 oil is suitable. Another good oil is Dexron 3. As far as volume is concerned, partial replacement oils in Automatic transmission Kia Sportage 3 will require up to six liters of ATP fluid. In the event that a hardware (full) replacement is made, it is necessary to prepare about twelve liters. But we will not consider this method.

Useful advice: car owners recommend changing the oil in the Kia Sportage 3 automatic transmission on the eve of winter. During this period of time it will be better if the box runs on fresh oil. This will slightly extend the life of automatic transmission mechanisms and assemblies.

Tools

For a successful replacement, we need:

· A standard set of keys and heads (in particular, "for 10" and "for 14").

Pliers (or we'll loosen the clamps on the hose).

· Empty used oil container. Its volume must be at least five liters.

· Plastic funnel and hose.

Carburetor cleaning fluid (it needs to process the box pan).

We also need a new gasket for the pan and filter. Fluid replacement work must be done in the pit. In the absence of such, you can use a jack, but it will be inconvenient.

Getting Started

So, first we install the car on a pit or overpass and warm up the box. It is enough to let the car run for 5-7 minutes at idle. This will be especially useful for liquids in cold weather. The heated oil will be less viscous and will merge faster from the box. And to further arrange the process, you can remove the probe from the box in order to ensure the flow of air inside.

Next, we find a plastic plug, which is located at the bottom of the crankcase of an automatic box. We unscrew it and immediately substitute an empty container for draining. After a couple of minutes, the liquid will stop flowing from the box. But it is worth remembering that half of the volume still remains in the torque converter and valve body.

Please note: the automatic transmission drain plug on the Kia Sportage is not in the most convenient place. Therefore, many motorists drain the fluid through the radiator hose, after loosening its clamp with pliers.

Next, remove the tray itself. It is mounted on bolts in the amount of 21 pcs. It is necessary to remove the pan very carefully, since part of the liquid (about two hundred milliliters) may remain in it. Will stay at the top oil filter. You need to extract it and install a new one (we'll talk about it at the end of the article). Also, do not forget about the filter on the pallet. These are small magnets that hold the products of development in themselves. Before installing the pallet, it is imperative to clean it of these chips. Not a superfluous operation will be washing the cavity of the pallet. How to do it? It is necessary to spray the carburetor cleaner and wipe everything dry with a rag. Ordinary gasoline does just fine. This will remove most of the emulsion and dirt that was at the bottom of the automatic transmission. After that, you can safely install the pallet in place. But you need to put it on a new gasket. The old one is no longer suitable for reuse.

After that we spin drain plug and using a funnel and a hose, fill in new fluid through the dipstick. You only need to pour exactly how much has flowed out of the box when replacing. Ideally, the oil level should be in the middle.

What's next?

Now the matter is small. You need to start the engine and drive the oil in the box. To do this faster, you can switch automatic transmission modes several times with a delay of five seconds. Then we turn off the engine and once again check the fluid level on the dipstick. If it has become less, we resume the level to a normal level.

About the filter

Many people think that for a long and trouble-free operation of an automatic transmission, it is enough to change only the oil in it. But this is a delusion. Both the ATP fluid and the filter change. On such boxes, a two-layer felt element is installed. It cannot be cleaned and is replaced entirely with a new one. Why is it so important? The fact is that a clogged filter can cause a drop in oil pressure in the box.

Because of this, there are various kicks and jolts, as well as delays when shifting gears. Do not forget about the sediment at the bottom of the pan. Over time, it begins to clog the channels of the valve body and solenoids. Because of this, kicks are also possible when shifting gears.

How often to change?

The manufacturer regulates the next oil change period in automatic transmission - 60 thousand kilometers. But this only applies when complete replacement liquids on the stand. If a partial method is used, this period must be halved. Thus, the repeated replacement (or rather update) of the oil will be after 30 thousand kilometers.

Conclusion

So, we figured out how to change the oil in the Kia Sportage automatic transmission. By adhering to the given regulations and replacing filters, you can significantly extend the life of an automatic transmission without any additives. But don't skimp on consumables. A cheap filter and oil will not guarantee a long transmission life, even if the work is completed on time.

Kia Sportage the second generation was one of the most popular crossovers in its segment. The appearance of the third generation caused a lot of dissatisfaction with the design, but over time, the negative perception changed towards a positive one. Note that most find similarities between the Korean crossover and the German premium SUV. Porsche Cayenne, especially after updating the latter, which even has rear optics, now, like the Sportage.

Like everyone else Kia models the crossover has its own analogue from Hyundai, for the Sportage such an analogue is with which they have completely similar technical characteristics, including a line of engines and transmissions. Potential owners are offered a choice of two petrol engines and one diesel. The gasoline range of engines consists of a 2.0-liter aspirated engine with a capacity of 150 hp. and a 1.6 lira turbo engine with an outstanding 177 hp. diesel engine a volume of 2.0 liters is capable of delivering 185 hp.

The transmission options are manual and automatic transmission gear shifting with 6 steps, as well as a new DCT robot with seven gears and two dry clutches.

Kia Sportage with mechanics

With mechanics, only three configurations are available, two with front-wheel drive and one with all-wheel drive.

• 2.0 liter petrol engine with 150 hp price from 1,269,900 rubles

• 2.0 liter petrol engine with 150 hp price from 1,424,900 rubles

• 2.0 liter petrol engine with 150 hp full price from 1,564,900 rubles

Kia Sportage with automatic

The machine is also available in both front-wheel drive and all-wheel drive versions.

• 2.0 liter petrol engine with 150 hp front-wheel drive price from 1,484,900 rubles

• 2.0 liter petrol engine with 150 hp front-wheel drive price from 1,544,900 rubles

• 2.0 liter petrol engine with 150 hp four-wheel drive price from 1,564,900 rubles

• 2.0 liter petrol engine with 150 hp four-wheel drive price from 1,624,900 rubles

Prestige

• 2.0 liter petrol engine with 150 hp four-wheel drive price from 1,784,900 rubles

• 2.0 liter diesel engine with 185 hp four-wheel drive price from 1,904,900 rubles

• 2.0 liter petrol engine with 150 hp four-wheel drive price from 2,019,900 rubles

• 2.0 liter diesel engine with 185 hp four-wheel drive price from 2,139,900 rubles

Relatively recently, almost all models brands Kia got a sports package that adds a sporty interior and exterior design to the car, and in some cases a new robot and turbomoto are also available.

• 1.6 liter petrol turbo engine with 177 hp four-wheel drive price from 2,084,900 rubles

• 2.0 liter diesel engine with 185 hp all-wheel drive price from 2,094,900 rubles.

Of all the above versions, we would prefer a diesel engine, all-wheel drive and a classic automatic, because. in our opinion, this is the optimal ratio of price / fuel consumption / dynamics and reliability.

Competitors in this segment for Sportage 2018 can be considered Volkswagen Tiguan price from 1,349,000 rubles, Ford Kuga price from 1,399,000 rubles, Honda CR-V price from 1,769,900 rubles, Hyundai Tucson from 1,505,900 rubles, Mazda CX-5 price from 1,431,000 rubles and Toyota RAV4 from 1,493,000 rubles.

Kia Sportage 3 is equipped with either mechanical box gears (5-speed for a 2-liter gasoline engine and 6-speed for a 2-liter diesel engine), or a 6-speed automatic transmission.

Manual Transmission

Car modifications with 2-liter gasoline engine completed 5-speed transmission model M5GF1. It is installed in both front-wheel drive and all-wheel drive versions of the crossover and, depending on the type of drive, has design features. Kia Sportage with 2 liter diesel engine aggregated 6 speed gearbox M6GF2. Specifications The two types of mechanical transmissions are shown in the table below.

Parameter	M5GF1	M6GF2
gear ratios
1st gear		3.615
2nd gear		1.794
3rd gear	1.333	1.542
4th gear		1.176
5th gear		0.921
6th gear	-	0.732
Reverse		3.416
General gear ratio	4.533	4.643/3.421

Automatic transmission

For modifications with a 2-liter gasoline engine installation is provided automatic transmission model A6MF1, for versions with a 2-liter diesel - models A6LF2. Both boxes have almost the same design and are arranged according to the traditional scheme - torque converter + planetary gear. The differences lie in gear ratios and the diameter of the torque converter. The gearbox mounted on a crossover with a 4WD drive has an additional flange for mounting transfer box. Speed ​​switching is carried out using electronic control unit, which analyzes many parameters and determines the optimal moment for switching. Characteristics installed on the Kia Sportage 3 automatic transmissions are given in the table.

Parameter	A6MF1	A6LF2
		136 HP	184 HP
gear ratios
1st gear		4.651	4.252
2nd gear		2.831	2.654
3rd gear	1.772	1.842	1.804
4th gear		1.386	1.386
5th gear		1.000	1.000
6th gear	0.778	0.772	0.772
Reverse		3.393	3.393
General gear ratio	3.648	3.195	3.041

In this article I will briefly outline what most often breaks down on Kia car Sportage 3, model 2010-2016, factory designation Sl or Sle. I work at a service station and have practical experience in this matter. It will describe not only the typical "diseases" of the sportage, but also how to treat them. The article is designed to save the owner of such a car from many hours of searching for information in sections of automotive forums. It will also be useful to those who are just going to buy a used Sportage, because it is important to understand what should be checked when buying. If I suddenly missed something from the view, write in the comments.

All wheel drive not working!

A very common malfunction in the 3rd generation Sportage is a breakdown of the all-wheel drive system. It occurs even when the car is operated exclusively as an urban "SUV", without using the all-wheel drive lock function. After all, even if you do not press the 4WD lock button, the control unit automatically connects rear axle in moments sharp acceleration when starting off, or when the front wheels slip. Torque is constantly redistributed by the ITM unit between the front and rear wheels in a proportion from 100% - 0% to 50% - 50%, respectively.

There are two all-wheel drive malfunctions on the Sportage:

• breakdown of the all-wheel drive coupling (PP);
• corrosion of the spline connection between the gearbox (gearbox) and transfer case;

Moreover, the second malfunction occurs much more often than the first.

Malfunction of the PP engagement clutch

All-wheel drive clutch, Sportage; 1 - clutch package, 2 - pump

It appears as follows: no connection rear wheels, even in the 4WD lock mode (i.e. when the button is pressed), while the 4WD system malfunction lamp on the instrument panel is on. Important, that cardan shaft while it rotates!

In general terms, the clutch is a conventional system with a multi-plate clutch pack that compresses under oil pressure. The pressure is generated by a pump mounted on the clutch housing.

Error codes "P1832 Clutch Thermal Overstress Shutdown" or "P1831 Clutch Thermal Overstress Warning" appear. Here is a detailed description of what exactly breaks in this case and how it can be repaired.

Especially often this happens when the clutch is overheated, with prolonged slippage. Or with frequent use of the 4WD lock mode. But this mode is intended only for short-term use on a site with difficult road conditions. Do not drive for a long time with the 4WD lock button pressed.

The problem is solved by replacing the PP clutch assembly. The part is not cheap, but there are companies that provide clutch repair services. These services are easy to find online.

One more possible breakage This is a malfunction of the clutch pump itself. In this case, error code P1822 or P1820 occurs. On this issue, KIA even issued a service bulletin, according to which of. the dealer must replace the clutch assembly.

If the car is not under warranty, you need to replace the pump separately, which will be much cheaper. Only the new pump has already been modified, and requires the purchase of wiring for it.

Part Numbers: 4WD Clutch Pump - 478103B520, pump wiring 478913B310

The price of a pump with wiring is approximately 22,000 rubles.

If you're buying a used Sportage, don't forget to check the car for these issues. The repair is quite expensive, it consists of the prices for differential parts (approx. 20,000 rubles) and the cost of the transfer case (600 USD price for a used one) and, of course, the work of removing the gearbox and replacing parts (up to 20,000 rubles).

List of necessary spare parts for the repair of all-wheel drive on Sportage 3, with OE numbers

Gears on a manual transmission do not turn on / it is difficult to turn on, or extraneous noise

This disease begins to manifest itself with a characteristic noise from the gearbox, which is heard on a cold one, when the engine is running at Idling. The Service Bulletin for this issue prescribes the replacement of synchronizer rings for 4th, 5th and 6th gears of the manual transmission.

Sometimes the reason may be in the "synchronism" of the 3rd gear and the corresponding gear. Specifically, the reason is determined after disassembling the box.

If synchronizers are not replaced in time, more serious consequences may occur - fur. damage to the gear teeth, which entails their replacement, and, consequently, a more expensive repair.

The price of work usually costs up to $ 300. Plus the necessary parts.

For Kia Sportage 3 SL 2010-2016 4G+WiFi Multimedia Video Player GPS Navigation Android 8.1 HiFi

The car does not drive, a strong rattle in the area of ​​\u200b\u200bthe right wheel, a malfunction of the intermediate shaft

The problem is similar to the one described above with all-wheel drive. The spline connection between the right drive shaft and the inner CV joint is rotten. This happens due to the ingress of water through the stuffing box (or rather the anther). Further, corrosion does its job, the splines weaken and are completely cut off. With completely cut splines of the wash shaft, the car will be able to get to the service only when the all-wheel drive, because as a result of the operation of the differential, all the torque of the front axle will go to the right side.

Corrosion of splines of the promshaft and right drive, Sportage 3

Repair price: promshaft 4,500 rubles, right-hand joint up to 45,000 rubles.

As in the case of the razdatka-box connection, it is necessary to do preventive maintenance with the replacement of the oil seal and the application of lubricant, this will extend the life of the splines.

The engine does not develop more than 3000 rpm, the “CHECK” lamp is on or flashing

Of course, these symptoms are typical for many breakdowns. diesel vehicles. But here we are talking about the most frequent malfunctions, those that sooner or later happen on all Sportage.

This "disease" is typical for diesel trim levels, with R 2.0 and U2 1.7 engines. There are usually two reasons for these symptoms:

• malfunction of the boost pressure sensor, on a car with a 2-liter engine;
• malfunction of the boost pressure sensor wiring, on machines with a 1.7 engine;

In both cases, the control unit translates the operation of the motor into emergency mode, which means, in particular, a cutoff of engine speed at around 3000 rpm. The driver has a feeling that the turbine simply does not work. This, of course, is not true.