Alternator belt viburnum 8 valve size. Technology for replacing the drive of auxiliary units with Lada Kalina. The specifics of the drive scheme on different modifications of Lada Kalina

This belt needs to be replaced

The alternator belt is replaced after studying the circuit of this device. A similar procedure can be done by hand or with the help of professionals. The alternator belt is used to transmit rotation to the secondary elements of the unit. Some types of such a part are capable of simultaneously setting in motion several mechanisms. The belt has a direct effect on the pump, pump, compressor and generator. For uninterrupted and well-coordinated operation of the generator mechanisms, the timing belt Lada Kalina is regularly inspected.

There are 3 types of belt:

wide;
with a normal section;
fan.

Part replacement features

The alternator belt at Lada Kalina consists of the following components:

pulleys;
tensioner roller;
V-ribbed belt.

Removing the old belt

Replacing the timing belt Lada provides for the repair and installation of a new roller or pulley. It must be taken into account that there are 2 schemes of the gas distribution mechanism on Kalina. Their difference is in the form of a tensioner. The 1st drawing is characterized by the displacement of the timing belt from the motor block due to a special bracket. In the second version of the scheme, the mechanism includes an eccentric tension roller.

Replacing the alternator belt involves adjusting this part using a movable bracket. It can be moved by turning the adjusting bolt and locknut. Checking and inspection of the switchgear are carried out at regular intervals. The manufacturer in the technical documents of the vehicle indicates performance indicators, upon reaching which the timing belt Lada Kalina is replaced. For the tensioner roller, this figure is 60,000 km, and for the main unit - 30,000 km.

Auto mechanics recommend carrying out a planned technical inspection timing belt Lada Kalina every month. This part is replaced when cracks, scuffs, cuts and other defects appear. The replacement of the alternator belt on Kalina is carried out when a high-frequency whistle appears as a result of turning on electrical appliances.

Step-by-step instruction

Replacing the timing belt Lada and repairing the drive system involves the use of the following tools:

key on "19";
head on "8";
cap key;
key to "13".

Kalina is available with and without air conditioning. Replacing the timing belt Lada in both cases is carried out according to the same scheme. First you need to remove the crankcase, right wheel and fender liner. After dismantling expansion tank the engine is jacked up. FROM right side unscrew the pillow. By tightening the tensioner pin, you need to loosen the timing belt tension. The next step involves removing the drive from the roller and pulleys.

Once the new part is installed, you can assemble the structure, taking into account the reverse sequence of actions. Replacing the timing belt Lada is completed by adjusting the tension. This work is recommended to be carried out on a viewing hole, while all safety measures must be observed. If the flex link is replaced, a new tensioner pulley must be installed at the same time.

Adjustment of the device begins by loosening the stem locknut. Using the key to "8", by rotating the adjusting pin, the lock nut is clamped. Gradual tightening of the belt allows the use of regular scales, which are attached to the key at "8". The hairpin is tightened counterclockwise until a value of 2 kg is reached.

The adjustment of the timing belt Lada Kalina is considered the norm, when, with a force of 10 kgf, in the area between the pulleys of the crankshaft and the generator, the deflection level fluctuates between 8-10 mm. It should be noted that in modern cars special devices such as CNT-belt are installed. Their task is to recognize the acoustic characteristics of drive units.

In some cases, replacing the timing belt Lada involves dismantling the washer reservoir. It should be noted that a new gas distribution unit is stretched at the beginning of operation, so it is necessary to check the degree of its tension regularly. In the absence of the necessary knowledge and experience, it is recommended to replace the Lada timing belt in a car repair shop or using the book on the operation and repair of Kalina.

Soon, the owners who purchased the domestic model Lada Kalina are faced with the question of replacing the belt that drives the on-board network generator. This is equally interesting for owners of both eight and 16-valve versions of the practical "Russian". Due to the fact that Kalina motors are endowed with different design features, there are differences in replacing the specified consumable item. The value of the belt resource is primarily influenced by factors such as the quality of the product itself and the intensity of operation of the car. And only after knowing many details you can judge when the alternator belt needs to be replaced.

There are quite a lot of handwritten works on replacing the generator unit belt in the network, however, in our material we will try to explain all the points of interest to the owners in the most intelligible way. This will be clear even to inexperienced owners of their Lada Kalina, since it will not be necessary to involve special equipment, expensive tools and “gigabytes” of experimental information for work. All actions can be carried out, as they say, "on the knee in the yard."

Purpose of the belt

The generator is used to generate electricity, which, during movement, feeds the entire on-board network of the car, along with pantographs. Also, with the help of this node, the battery is recharged. Without these important features, the car is able to function for a short time until the battery is completely discharged. This aspect prompts the owners of LADA Kalina to more frequently check the condition of the belt drive, so that its breakage, which suddenly happened away from locality, did not cause a flurry of hysteria and convulsive searches for a phone in order to call for help.

Experienced drivers here show their thrift when they take "on board" new belt generator, since this consumable component has negligible weight and dimensions.

Our material is intended to help those owners who, due to the lack of proper experience, silently shrug their shoulders when asked about the purpose of the belt. In most modern motors, such a transmission drives the generator unit. The generator belt itself is in a taut state between the crankshaft pulleys and the LADA Kalina generator itself. With the start of rotation, electrical power is generated, which is sent through a rectifier to all current collectors of the vehicle, including the battery.

Signs of need for replacement

Today, manufacturers are hushing up the regulatory deadlines, after which the alternator belt needs to be replaced. Here you should be vigilant and acquire knowledge regarding some of the signs that allow the owner to have an understanding of the need for replacement that has come.

These symptoms are the same for different types motors used in LADA Kalina.

The appearance of a whistling effect during the operation of the motor, which is especially enhanced during an increase in the electrical load on generator set. When, after the test and tension action, the indicated whistle does not disappear, then you can safely prescribe a replacement for the belt.
The presence of cracks on the working, side and back surfaces of the rubber product. This is due to the aging of the material, and therefore, we can indicate that the resource of such a component is running out, and this is fraught with an unforeseen impulse.
Deformation of the belt under the influence of external factors or in the case of the purchase of a counterfeit consumable.
An increase in noise, coupled with the effects of impacts. This also indicates a violation of the integrity of the material structure of the belt, which implies an early replacement. No pull here!

We repeat, if the entire list of measures taken to tighten the belt does not lead to success and the presence of these signs (or one of them) on the face, then there are no options other than replacing.

Replacement (8-valve unit)

The main question is: how to change? After acquiring a new consumable component and preparing the necessary list of tools, we proceed to the process.

We turn off the engine of 8 valves Lada Kalina and look under the hood.
We are looking for the location of the generator. We’ll tell beginners: this node is located on the right side, if you look at the direction of the car.
Now we “remove” the tension, for which we weaken the tightening torque of the screw on the adjusting rod of the tensioner. Before this manipulation, we recommend checking the belt tension in order to ensure an approximately identical condition after installing a new component.
We arm ourselves with a key to “8” and wrap the thread of the adjusting rod to its full size, which allows us to minimize the tension.
With a key of the 13th dimension, we unscrew the lower fastener.
We take the rod of the tension assembly up and remove the used alternator belt from both pulleys.

As you can see, the dismantling operation on the 8-valve engine did not present any particular difficulties. Also, the installation procedure, performed in reverse order, is quite simple and transient. After the installation process, do not forget to check the tension level, whose correct “value” will eliminate the risk of the product jumping off while riding. Experts make a recommendation related to the need to re-check how the belt tension was carried out. This is done after starting the Lada Kalina engine and running it for a short time.

Replacement in 16-valve version

Such Lada Kalina engines are equipped with air conditioning, which makes the replacement procedure slightly different from that previously indicated on the 8-valve engine.

We remove the belt that has been loosened and dismantled from the pulleys through the bottom of the engine compartment.
For this purpose, we release one of the engine mounts.
You will also need to raise the car with the removal of the right front wheel.
After these manipulations, we dismantle the fender liner from the corresponding side and the crankcase protection of the unit.
Now we remove the weakened support, having previously lifted the motor pan with a jack (through a wooden or other gasket).
Then the unit is carefully lowered until it is possible to remove the belt.
Installation is carried out according to the reverse algorithm.

Summing up

We hope that our material will help many Lada Kalina owners who are faced with a problem and need to replace the alternator belt. We examined in detail the replacement options, both on 8-valve engines and on 16-valve units.

We recommend that you systematically monitor the condition of this belt and replace it in a timely manner, since it is not difficult, and now you know how to change the belt. Buy only high-quality products, and you will not suffer a sudden trouble on the road.

I think that many car owners have encountered such a problem when the alternator belt whistles. This occurs due to the weakening of the tensioner, it is especially clearly revealed in wet weather, when a not very pleasant whistle appears from under the hood. Stretching is quite simple and does not take much time, and very little tool is required:

A wrench for 8 box or open-end, or a head with a ratchet - will also do
Key for 19

Alternator belt adjustment on Kalina

The first thing we will need to do is to loosen the tensioner rod lock nut by unscrewing it slightly counterclockwise:

And then we unscrew the tensioner rod, and thereby the belt will be stretched. In order not to have to exert a lot of effort during tension, it is necessary to press the tensioner body with your hand and at the same time unscrew it, as shown in the photo below:

After tightening the belt, tighten the lock nut and check for more whistle with the engine running. To verify this, it is necessary to turn on as many electrical appliances as possible with the engine running: high beam, stove on high revs, rear heating glass, etc. If the belt does not whistle after doing this procedure, then it is tensioned normally.

But it should also be borne in mind that constriction will also not benefit the device. Firstly, the belt itself will wear out a lot. Secondly, the bearing will not withstand a large load, it will buzz and even jam for a fairly short period of time. Once on the last car there was a sad experience, I pulled it too hard and after a week of driving the bearing went under replacement. So don't go overboard when doing this type of maintenance on your Kalina.

If, on the contrary, it is necessary to loosen, then it will be necessary to twist the stem clockwise. Then tighten the lock nut. That seems to be all the recommendations that you need to know when performing this simple procedure. If you have any questions or comments on the material prepared by me, unsubscribe in the comments.

The domestic auto industry continues to progress - AvtoVAZ presented new generation Lada Kalina . The model is equipped automatic transmission Jatco transmissions and an improved ventilation and heating system. Factory officials say that new car got rid of the problems associated with the electric power steering of the previous series.

This is all wonderful, but it was thanks to the first generation of the VAZ 1118 that repair techniques were worked out that could be very useful to owners of new cars. Let's say the procedure replacement poly V-belt generator on Kalina exactly the same for both models.

The specifics of the drive scheme on different modifications of Lada Kalina

The factory design provides for various lengths of standard gears, which depend on the configuration of the machine:

without air conditioning - 882 mm;
with air conditioning - 1018 mm.

The first VAZ 1118 models without an air conditioner and a tension roller are equipped with a poly-V drive length 823 mm. So one belt from the pulley crankshaft not only the alternator, but also the air conditioning compressor can be involved. The roller pattern allows you to adjust the tension.

In the stock configuration, the car is equipped with a drive from the company Gates. As a replacement on the first models, you can use Dayco 825. Here you need to take into account that elastic instances are marked with the symbol " Poly-V”, in its absence, the product has a rigid structure.

Alternative drives for VAZ 1118 with air conditioning:

Roulunds Rubber 6PK1015;
Dayco 6PK1005;
Bosch 6PK1015;
Gates 6PK1019.

Alternative drives for VAZ 1118 without air conditioning:

Bautler 6PK883;
Dayko 6PK888;
Finwhale BP6 883;
Luzar LB 0118 1118-3701720 6RK 884;
Roulunds Rubber 6PK884;
BRT 882 mm (factory Balakovo).

Regulations for periodic inspection and replacement of the alternator belt on Kalina

Many new owners Vehicle either from prolonged joy, or out of ignorance, they recall the presence of a flexible connection under the hood only after the lamp on dashboard. The technical documentation of the car indicates the operating standards, after which the torque transmission elements must be removed and new ones installed:

tensioner roller after 60,000 km;
belt after 30,000 km.

cracks;
abrasions;
bundles;
oiling;
cuts.

The high-frequency whistle that appears when electrical consumers are turned on also indicates the need to replace the alternator belt on Kalina, or at least adjust its tension.

Technology of repair of the drive system of auxiliary units

Sequencing similar for models with and without air conditioning and consists of the following items:

Remove the engine protection.
Remove the right wheel and fender liner.
Dismantle the expansion tank.
Jack up the right side of the engine and unscrew the pillow.
Twisting the pin of the tensioner mechanism, loosen the belt tension.
Remove the drive from the roller and then from all the pulleys.
Install new part and assemble in reverse order.
Perform tension adjustment.

It is desirable to carry out work on a viewing hole in compliance with all safety measures. When changing the flexible connection, it is recommended to install a new tensioner roller at the same time, but this already depends on the desire of the owner and the condition of the assembly.

Tension adjustment

After replacing the alternator belt on Kalina, "rough" adjustment and subsequent engine start, it is necessary to more accurately drive tension adjustment. To do this, we perform the following operations:

loosen the tensioner rod locknut;
turn the adjusting pin with the key to “8” until the result is achieved;
tighten the locknut.

With a gradual tightening of the belt, you can use a simple canter scale, which must be connected to the key at "8" and tighten the pin counterclockwise to a reading of 2 kg. The setting is considered normal when, with a force of 10 kgf, in the area between the pulleys of the generator and the crankshaft, the amount of deflection will be within 8-10 mm.

More "advanced" owners have CNT-Belt type devices, the operation of which is based on the recognition of known acoustic characteristics of drive devices.

Useful video tutorials on the topic

A step-by-step video will help you analyze in detail all the nuances of replacing and adjusting the tension

How to replace the alternator belt on Lada Kalina

How to tighten the belt

Alternator Belt Replacement on Kalina

The correct operation of the generator itself and the entire electrical system of the car depends on the alternator belt. Replacing the alternator belt with a Hyundai Solaris. Replacing the timing belt n-150 8 cl Loosen the key to 13 the upper bolt of the generator. If the belt is worn out or very slack, there is a danger that the generator will not produce current and the battery will quickly discharge. Replacing the alternator drive belt and alternator lower mounting (see photos 7 and 8). Starting a car will be very problematic. Replacing the tension roller and alternator belt 4zz-fe. Replacing the alternator belt Lada Kalina 8 cells: size. The entire electrical system will fail.

Finding if the belt needs to be changed is quite difficult, but some signs may indicate this:

when the engine is running, the headlights become weak, dim;
extraneous noises, whistling when starting the car .;
after a run of 30 - 50 thousand on Kalina, it is worth checking the serviceability of the belt. It may have cracks, "broken" teeth, cuts, oiling or delamination of rubber, which can lead to a broken belt. In this case, it is better to replace it.

Choice belt and its price

If the design generator has a tensioner, then the length of the belt is 883mm. Replacing the alternator belt Lada Kalina Lada Kalina (Lada Kalina (16 cells). Replacing the alternator and power steering belt tensioner pulley. 4 STAGES OF REPLACING THE TIMING BELT KALINA 8 VALVES. Hello, readers of the RtiIvaz.ru blog. Today we will consider how the belt is replaced Timing Kalina with 8 valve engine. In the vast majority of cases, there are 8 valves on Kalina. Replacing the alternator belt Lada Kalina 8 valves:. If the generator is like on Grant, the length is 823mm.

Belt replacement generator viburnum

Alternator belt replacement Kalina. The simplest and fast way. The belt can be replaced within 5 minutes

Belt replacement generator Lada Kalina

Today 01. 12. 2015, replaced this one belt on the generator for a new one, mileage 60,000.

Replacement

How to quickly change the alternator belt on Kalina:

A few words about the elastic belt - you don’t need to adjust it, it starts first on the pulley, and then on the generator, puts the gear on and pushes the car, after slipping a mounting tool or the like under the belt.