In my youth, like any kid, I was very interested in radio-controlled cars. I remember how a neighbor's guy had such a car, how a line of the same boys lined up on the street who wanted to try to steer at least a little. It is clear that few people could afford such a luxury, but almost every one of us attended a circle of young technicians, where they were taught to design and create some models of technology. Do you remember how the editions "Young Technician" and "Technology of Youth" were ordered home, I still have packs of magazines in my dacha that I once reread up and down ... When in moments of idleness I open one of the magazines - nostalgia is a wave covers, it is simply impossible to contain emotions ...

My labor teacher knew how to do many things and gave us a lot, for which I am very grateful to him. I still remember our lessons - it would seem that we were given the most elementary knowledge, but how much they meant then! It is modern youth who do not appreciate what they are given at school and at the university - gaining knowledge has become something insipid and not at all valuable.

In the light of the innovative ideas of our teacher, some of us still tried to make something like a self-propelled vehicle. It turned out well, though few reached the victorious end. I, without bringing the idea to life, decided with my son to make a typewriter on the control panel. True, again, we did not reach the victorious ...

Our goal was:
1. Make your own radio-controlled model.
2. Use improvised means.

Here's what we settled on:

The steering wheel was also planned here, as you can see, control from independent suspension, a completely home-made unit (wood, cardboard, wire, screw, rubber, glue were used). The son left, and we never made the machine. Just recently, again with nostalgia, I took it out of a deep box and thought that it would be worth doing all the same what was started. True, the whole mechanism is completely beyond my power, and there is no point in bathing - modern possibilities have decided everything for us - you can buy ready-made spare parts. So the only thing left is the motor, radio control and you're done! Soon it will look like this model))))))))))))

I took the photo from here: hobbyostrov.ru/automodels/, from where, in fact, I plan to buy radio-controlled parts for implementation in my car. Only vague doubts gnaw at me ... Is it worth taking a hand-made unit as a basis or buying a finished one? radio-controlled car and make it radio-controlled. Or, as easy as shelling pears, go to the above site and buy a ready-made radio-controlled car - is it worth the bother? Because I have order with elastic guides, but there can be real problems with depreciation, durability, all-terrain ability.

Therefore, for the time being I am leaning towards the second option - as a basis, you can buy a designer and build a model to your liking, into which to introduce radio control. Still, a cardboard model is not so durable, and where will it be possible to lubricate the transmission in it?)))))) Moreover, on the same hobbyostrov.ru/ you can buy all the necessary spare parts.

In general, I will do it - I will show what happened. In the meantime, I would like to hear / see the experience of creating radio-controlled models, I'm sure that I'm not the only one who bothers with this. Maybe some specific advice?

It is unlikely that anyone will deny the fact that a radio-controlled car is the most interesting and appropriate gift for a child and many adult men. But it often happens that even expensive models turn out to be unreliable and show low speed. And even in this case, there is a solution. In this article, we will look at ways to make a radio-controlled car in order to fully enjoy control. racing car along the trajectory you have planned.

How to assemble a radio controlled car?

So, for self-assembly of a radio-controlled car, you will need the following items:

• model of absolutely any car, you can use the simplest one, any production - from Chinese to domestic, from American to European;
• VAZ solenoids for opening doors, 12 volt battery;
• radio control equipment - AGC, but do not confuse with Automatic gain control, because the abbreviation is exactly the same;
• batteries with chargers;
• radiator;
• electrical measuring units;
• a soldering iron along with solder, as well as a metalwork tool;
• a piece of rubber, which is necessary in order to strengthen the bumper.

An example of assembling a radio-controlled car

Well, now let's go directly to the scheme, in other words, to the process of creating a high-quality model of a RC machine:

1. At the very beginning, assemble the suspension - that's why we needed the base model, as well as a 12V battery.
2. After that, take the VAZ solenoids, plastic gears and assemble the gearbox.
3. On the body and studs, cut the thread so that you can hang the solenoids and gears.
4. Now connect the gearbox to power, be sure to check. If everything is in order with its functionality, install the gearbox itself directly into the machine.
5. Install a heatsink to protect the circuit from overheating. By the way, you can fix the radiator plate securely enough with the help of bolts.
6. After you install the heatsink, install the radio control and power driver ICs.
7. After installing the chips, fully assemble the body of your car.

Now you can safely proceed to the test races of the car.

So, you have a radio-controlled car in your arsenal. What needs to be done to make it more reliable and maneuverable?

Do not overload the model with unnecessary systems and details. All sound signals, high beam, low beam headlights, opening doors - that's all, of course, it looks pretty nice, believable. Creating a radio-controlled car is already quite a difficult process. You should not complicate it even more, because this can have a very negative impact on the main running indicators of your model.

The most important thing to focus on is to make a quality suspension, to ensure excellent signal transmission. Well, to improve maneuverability, optimize speed performance, fine-tuning the system during test runs will help you.

Important! Even the most interesting radio-controlled car may not be the child's only hobby for a long time. So that he does not get bored and learns everything new with interest, and you waste your nerves less, correcting the consequences of the leprosy of a little crumb, use a selection of our interesting ideas:

footage

Now you can make a radio-controlled car and enjoy the toy for as long as you have the excitement, because it's so exciting.

This article is a modeler's story about making a homemade radio controlled model all-wheel drive car range Rover from a plastic model. It reveals the nuances of manufacturing axle drives, installing electronics and many other nuances.

So, I decided to make a car model with my own hands!

I bought an ordinary bench model in the store range rover a. The price of this model is 1500 rubles, in general it is a little expensive, but the model is worth it! Initially I thought about making a hammer, but this model is much more suitable in design.

I had electronics, well, I took some parts from a trophy called "cat" which I had not needed for a long time and was disassembled for parts!

Of course, it was possible to take other prefabricated models as a basis, but I wanted just such an off-road jeep.

It all started with bridges and differentials that I made from copper pipes and soldered with a regular 100w soldering iron. The differentials here are ordinary, the gear is plastic, the rods and drive bones are iron from the trophy.

These tubes can be purchased at any hardware store.


I took the differential gear from a regular printer. I didn’t need him for a long time and now I decided that it was time for him to rest.

Everything turned out pretty reliably, but it’s rather inconvenient to work with a soldering iron!

After I made the differentials, I had to close them with something, I closed them with pill caps.

And painted it with regular car paint. It turned out beautifully, although beauty is hardly needed for a trophy.

Then it was necessary to make steering rods and put bridges on the frame. The frame was included and to my surprise it turned out to be iron, not plastic.

It was not easy to do this, since the scale of the parts is very small and it was not possible to solder here, I had to bolt it. Steering rods I took from the same old trophy that I dismantled.

All parts of the differentials are on bearings. Since I made the model for a long time.

I also ordered a gearbox with a reduction gear, the gear will be switched on by a microservo machine from the remote control.

Well, in general, then I installed a plastic bottom, cut a hole in it, installed a gearbox, cardan shafts, a home-made gearbox, an ordinary collector engine for such a small model, it makes no sense to put a bk and the speed is not important to me.

The engine is from a helicopter, but in the gearbox it is quite powerful.

The most important thing is that the model does not move in jerks, but smoothly without delay, the gearbox was not easy to make, but I had a heap of details, the main thing is ingenuity.

The reducer was screwed to the bottom, it kept perfectly, but to attach the bottom to the frame I had to tinker.

Then I installed electronics, shock absorbers, battery. At first I installed the electronics rather weak and the regulator and the receiver were a single unit, but then I installed everything separately and the electronics were more powerful.

And finally, painting, installation of all the main components, decals, headlights, and more. I painted everything with regular plastic paint in 4 coats then painted the fenders brown and sanded the parts to give a shabby and worn look.

The body of the model and the color are completely original, the color was found on the Internet and the photo real car everything was done according to the original. This color combination exists on real car and in this color they were painted at the factory.

Well, here are the final photos. I will add a video with the test a little later, and the model turned out to be very passable, the speed was 18 km / h, but I did it not for speed. In general, I am satisfied with my work, and it is up to you to evaluate it.

The machine is not large, the scale is 1x24 in size and there is the whole point of the idea, I wanted a mini trophy for myself.

The model is not afraid of moisture! Germetil himself simply varnished the electronics, very reliably, no moisture is terrible.

Servo machine micro park from the aircraft for 3.5 kg.

The battery lasts for 25 minutes of riding, but I will install more powerful electronics and a battery, because this one is not quite enough.

Even the bumpers are the same as on the original. And fastenings on them too. The drive on it is not 50-50%, but 60-40%.

In general, the Range Rover turned out in a rustic style, I didn’t even think that it would turn out to be so high-quality to paint because I really don’t know how to paint, although there’s nothing difficult!

I forgot to add for the sake of beauty, I also installed a roll cage and a full spare tire. Spare wheel and frame were included with the kit.

More about radio-controlled models:

Misha comments:

Tell me how it works four-wheel drive, inside the bridge, what besides the razdatki be? There must be rounded fist after all.

Instruction

Self-assembly of the machine has several advantages. You will not only save money, but you will be able to make exactly the one you want. First of all, decide on the amount of money you are willing to spend. The range of spare parts and types is very large, the price range is also very large. When the amount is determined, then proceed to develop a small building plan. Decide which machine you want. You can do it simply on a wired control, or you can use a radio control, which will cost a little more.

Choose a chassis for your future machine. Now you can find a huge number of different chassis, and they are all interchangeable. When buying, pay attention to the quality of the parts. There should be no inclusions and notches on plastic parts. The front wheels should turn easily. Wheels are usually sold with the chassis. They also deserve a lot of attention. It is best to buy wheels with rubber, as plastic ones have very poor grip on the surface.

The next step is choosing a motor. This is the most important step as you choose the heart of your future car. It will largely depend on the dynamics and specifications future model. There are two types of motors for models - electric and gasoline. Electric motors are unpretentious in maintenance and have a relatively low price. They are very economical, as they are powered by batteries that are easy to recharge. Gasoline engines have more power, but are more expensive and require careful maintenance. Yes, and special fuel has a significant price. If you are new to modeling, then feel free to choose an electric motor. You will save money and time.

Now you need to decide what type of control will be - wired or wireless. Wired control is cheaper, but the car will only ride within a radius equal to the length of the wire. The radio unit costs a little more, but allows you to drive a car at an antenna coverage distance. It is best to overpay a little and buy a radio unit. Also think about the body of your car. On the shelves of the store you can find cases of almost all modern models auto. You can also make the case according to your own unique sketch.

Now you need to assemble all the components. Take the chassis and attach the motor and radio unit. Install the antenna. Along with the components, you should be sold assembly instructions, in which you can find in detail the connection diagram of the parts. Install batteries and antenna. Adjust the motor. When everything is in sync, attach the car body to the chassis. Now it remains only to decorate the machine to your taste.

Psychologists say that doing something interesting together brings children and parents closer together. A father for a boy is always and in everything an example. Unfortunately, fathers do not always understand what to do with their child, except for watching TV. We offer you to learn how to do This activity will appeal to both "boys": both the son and the father. In this process, the mother, most likely, will not be able to intervene. Simply because of their ignorance in the radio business.

Activity for dad and son only

Sometimes it seems that only mothers take care of raising a child, and fathers only earn money. However, the role of the father in the formation of the character of the baby, especially the son, is no less than that of the mother. It happens that a tired father has no time to play with his child in his noisy and cheerful games. However, you need to remember that there may come a time when the son simply stops looking for opportunities to communicate with dad if he constantly does not find time for this. In the end, there is a misunderstanding between dad and son, which is already quite difficult to overcome in adolescence. A ready-made kit or an independent attempt to figure out how to make a car on the control panel will help the father and child strengthen their relationship and mutual understanding.

What is the reason for the father's removal from his son? Sometimes this is a common inexperience, a kind of fear that young dads have, especially if the mother practically does not let the father near the baby.

Where can you start collaborating?

The easiest option (if you do not take into account the usual purchase of a finished model) is a machine-designer assembled according to the instructions. The kit contains all the necessary parts, you just need time and effort. A couple of evenings after work - and the radio-controlled toy is ready. And how much joy both son and dad will get when the model goes!

Another, more difficult option- inventing and assembling cars from scratch. In this case, it will take more time, and the details will have to be looked for, and common work, joint work will bring more emotions.

What to choose: a copy or just a car without a brand

Some advanced craftsmen create and collect exact mini-replicas real cars. It happens like this:

• firstly, the machine on the remote control is carefully assembled with his own hands, moreover, by family efforts;
• secondly, the model may not be made of the same materials as the original;
• thirdly, some minor minor details may be omitted.

Everything else, down to the engine and fuel, is done with meticulous precision. Some craftsmen assemble collectible models that are exact copies real, real cars.

On the control panel? You can collect a semi-copy, that is, a copy that resembles appearance selected original. And you can come up with a model "on a free theme", without focusing on any particular form. The size of the machine, in principle, does not matter. They also make small homemade models, jeeps or cars, and real radio-controlled mini-cars. It all depends on the desire, the allocated time and finances. Any activity that the son and father are engaged in together will strengthen the authority of the father in the eyes of the child.

What spare parts to prepare for the model to go

How to make a car on the remote control? Everything starts with a project. For work, you need to prepare not only a list of various parts and components, but all necessary tools. This will make the process more fun and organized. So, what you need to assemble the machine:

• a motor (from a hair dryer, from a small fan) or a gasoline mini-engine;
• frame;
• body;
• a set of rubber wheels;
• what real cars call "shaft";
• suspension or chassis;
• 2 axles for mounting wheels;
• antenna;
• thin connecting wires;
• rechargeable batteries to power the electric motor or gasoline (if the engine is an internal combustion engine);
• signal receiver;
• control panel (transmitter or radio unit).

Of the tools you will need pliers, a soldering iron, various screwdrivers and small wrenches, electrical tape, superglue, bolts, washers, nuts and other fasteners. All missing tools, parts and components are either made independently or bought in specialized stores.

How is this done and what will be the end result?

While preparing the parts according to the plan of how to make a remote control car, you may find that some of them need to be bought. The frame and body can be adapted from an old toy. Surely there are several boring or broken children's cars at home, from which you can take some of the missing parts.

The motor must be checked in advance for performance. Its power must correspond to the weight of the future little car. A weak engine will not pull a heavy model. All work can be reduced to zero. Batteries must be fresh or rechargeable. The build sequence is:

• The frame is assembled first.
• The motor is fixed and adjusted.
• Batteries or accumulator are installed.
• The next step is to fix the antenna.
• The wheels are mounted so that they can easily rotate with the axle. If this is not done, the machine will not be able to turn, it will only drive straight: forward and backward.

It is preferable to take rubber tires, as they move better not only on the floor of the apartment, but also on open ground. If you like the process and you manage to figure out well how to make a car on the control panel, you can build several different copies, teach neighbor dads and boys and arrange mini-races over rough terrain right in the yard.