How to change oil on Peugeot 308, 408, 3008, how much to fill, video

Oil changes in Peugeot 308, 408 and 3008 with the EP6 engine are carried out once a year or after a mileage of 20,000 km, but it can be done more often, it won’t hurt, the main thing is not less often.
Tool that is useful for changing oil:

We warm up the car a little, but not too much, otherwise you can get burned, and so that the oil becomes more watery and fluid.
We unscrew the clamp on the air pipe resonator with a screwdriver and remove it; it is removed by pressing the latches, first the upper one, then the lower one. What oil and how much to fill in BMW X5 (E70). We move the pipe a little to the side, it will not interfere with us and there is no need to remove it.

Now we put a rag under the body oil filter and unscrew the cap a little with the head 27. What kind of oil to pour into the Skoda Fabia engine. Skoda fabia 2 how much oil is in the box;. Let the oil drain from the housing into the pan.

After 2-3 minutes, remove the lid completely and remove the filter insert “cassette filter”, remove it with a little effort and change the rubber band that comes with the filter. We tighten everything and assemble it in the reverse order.

We drain all the oil from the pan by unscrewing the plug with a hexagon, which is located there.
We definitely install a new copper sealing ring on the plug, because the oil is very liquid. Recommended oil for 308, 408, 3008 and 308 turbo Total 0w30 with EP6 engine.
You probably have a question: how much oil to fill in Peugeot? Usually required fill 4.3 liters, but it is still preferable to carefully pour in 4 liters and add while looking at the oil dipstick to the upper mark.
After all that has been done, start the engine for approximately 5-10 seconds to fill the filter element.

Well, in the end it’s possible reset the maintenance counter(it is depicted as a key) on dashboard, so as not to miss the next substitution, this is not difficult to do, turn off the ignition, press and hold the reset button on the device, turn on the ignition without releasing it and see the running report from 9 to 0, wait until zero and release the button, the entire counter is reset.
Checking the oil in the engine.

But in this video you can see what will happen to the engine if you don’t change the oil or top it up.

You can also watch a video of changing the oil on Peugeot

Is it necessary to flush the engine when changing the oil?

At first glance it seems that there can be no hesitation, it needs to be washed. It is completely clear that over time, various kinds of deposits form in the oil system of a car engine, which will only cause harm to the engine.

Oil change Peugeot/Citroen 1.6 TU5JP4 (NFU)

"Automatic transmission selector" - Repair and service automatic boxes transmissions and variators in Moscow Website:

Oil change Citroen 1.6 TU5JP4

Substitution oils in the PSA 1.6 TU5JP4 engine. What kind of oil is poured into a manual gearbox at the Peugeot Parterre factory and which one should be filled in afterwards? Citroen/Peugeot The work is very ordinary and does not require any special work.

Do not forget that simplicity in reality is very deceptive.

Try to remember if you have seen rinsing waters that were manufactured by name manufacturers? No. And for what reason? The answer to this question is very, very simple. What oil to pour into 1.8 tsi? And Skoda pours Mobil 1 on Lenin. So the question arises? Modern types contain a whole set of different additives, which also includes detergents. These elements are fully managed with their “job” responsibilities. what oils to pour into automatic transmission, manual transmission, what kind of oil in honda engine cr-v can be Honda SRV(1). What kind of oil to pour into a walk-behind tractor engine. Therefore the application quality oil, also timely replacement can solve the problem associated with flushing one hundred percent.

Many also resort to flushing during the process of replacing one oil with another, so that particles of old water do not cause any harm to the additives included in the new one. What actually happens? To particles of flushing oil, often of very unknown properties and origin, it is proposed to add a balanced and high-quality composition of a new oil. The words of a well-known bureaucrat immediately come to mind: “I wanted the best, but it turned out as always.”
For this reason, if you decide to flush the engine, then for this purpose you need to use only high-quality and reliable products from reputable manufacturers.

However, it is best to flush the engine with ordinary but good motor oil, then drive about one and a half to two thousand kilometers with it, and then replace it with permanent oil.

This solution may seem somewhat expensive, but repairing the engine is much more expensive.

Tuning Peugeot - help with car tuning

Child seat for Peugeot car

10

Hello, I have a Peugeot 308, we changed the 0w30 oil in the engine. What kind of oil is poured into the Mercedes w210 automatic transmission. I would like to reset the counter maintenance, so as not to miss the next substitution, tell me how to do it. What kind of engine oil to fill in the Lada engine. Thanks in advance.

Hello, the service button is on Peugeot car located on the dashboard in the center, the one that switches the mileage of the car. Usually a maintenance reset is not done with one oil change, but as they say, the owner is a gentleman. So, doing a reset is painfully simple, press the service button and hold it, turn on the ignition, while the car should not be in energy saving mode, a reverse report from 9 to 0 will appear on the dashboard, wait until zero and the service will be reset. According to default in Russia, the service is set at 20,000 km, but by contacting the dealer, or using a computer, you can set any mileage before service.

Now I can change the oil on my own Pezhoshechka 408 without the help of others, and not have to pay for all this service centers several thousand for something that you can simply do yourself in almost an hour or even less. » Lada Vesta » what kind of oil to put in what kind of engine oil you. What kind of oil to fill in the citroen c5 gearbox. What kind of engine oil to fill in mitsubishi engine. By the way, I have already bought Total Quartz oil on your advice (the trader at the market praised the choice and said that people take it and do not regret it). Nice website you have, keep up the good work!

Thank you. This page helped me a lot!

It’s nice to realize that your hard work is not in vain, but helps those who need it. Thank you for your positive comment.

Very clear website and page. Apart from the total, what oil can you recommend at a cheaper price?

Unfortunately, I can’t give advice on oil, because I’m not an expert on oil, I can say that I’m not bad oil it can’t be cheap))), I myself also use Total in my own car.

Tell me how much oil to fill in Peugeot, if I buy a 4 liter canister, will it be enough for me?

The woman in the article says how much to fill, try to read)))

Yes 4 liters is enough for oil changes in the engine described in this article

The French company Peugeot is one of the oldest automakers in the world, the first car of the brand with steam engine was manufactured by Armand Peugeot and Leon Serpollet in 1889. Soon, engineers decided to replace the steam plant with a more efficient one. efficient engine internal combustion. By the beginning of the 20th century, mass production was established Peugeot cars, the company has become one of the main automobile enterprises Europe. She managed to remain among the leaders of the European automotive market to the present day, including thanks to the purchase of Citroen and the formation of the PSA concern in 1975. In addition to Europe, the brand's cars were successfully sold in Africa, South America and Asian countries. Peugeot is also famous for winning the very first car race, which took place in 1894 along the route Paris - Rouen, as well as further successful performances in rallies, rally raids and endurance races.

What kind of oil to fill in a Peugeot depends on the model and modification of the car. The French automaker has been working closely with TOTAL since 1995 and recommends the brand for cars lubricants TOTAL.

Engine size	Model	Volume oils	TOTAL QUARTZ INEO FIRST 0W30	QUARTZ INEO ECS 5W30	TOTAL QUARTZ 9000 5W40	TOTAL QUARTZ 7000 10W40
1.0L	107	3	+	+	+	+
1.0L and 1.2L Vti	208	3,25	+	+	+	+
1.4L and 1.6L Vti/THP	207 / 208 / 308 / 3008 / 5008 / 508/RCZ/Partner	4,25	+	+
1.1 Li and 1.4 Li	1007 / 206 / 206+ / 207 / 307 / Bipper/Partner	3	+ *	+	+	+
1.6 Li	1007 / 206 / 307 / Partner	3,25	+ *	+	+	+
1.6 L e	4008	4,2	+	+	+	+
1.8 Li	407	5			+	+
2.0 Li	206 / 307 / 407 / 807 / Expert	5			+
2.0 L e	4007 / 4008	4,3	+	+	+	+
2.2 Li	407 / 607 / 807	4,25			+	+
2.4 L e	4007	4,5	+	+	+	+
3.0 Li	407 / 607 / 807	4,75		+	+	+
1.3L Hdi	Bipper	3,2		+
1.4L and 1.6L Hdi no PF	307 / 308 / 407 / Bipper / Partner/Expert	3,75	+	+	+	+
1.4L and 1.6L HDi PF	1007 / 206 / 206+ / 207 / 208 / 307 / 308 / 3008 / 4008 / 5008 / 508 / 407 / Partner / Expert	3,75	+	+
1.8 L Hdi	4008	5,3	+	+	+	+
1.9L D	206 / Partner / Expert	4,5		+	+	+
2.0L Hdi no PF	206 / 307 / 407 / 807 / Partner/Expert	4,25 / 4,5 / 4,75/5,25		+	+	+
2.0L Hdi PF	307 / 308 / 3008 / 508 / 5008 / 407 / 807 / RCZ / Expert	4,7 / 5 / 5,25	+ *	+
2.2 L Hdi	4007	5,25		+
2.2 L Hdi PF	407 / 607 / 807 / 508	5,25	+ *	+
2.2L Hdi Euro IV	Boxer	6		+	+	+
2.2L Hdi Euro V	Boxer	6,2		+
2.7L V6 Hdi	407 / 607	5,5		+
3.0L V6 Hdi	407	6,25	+	+
3.0L Hdi Euro IV	Boxer	8,6		+
3.0L Hdi Euro V	Boxer	9		+

* only for models released after 2011

The information in the table is provided for your reference: when selecting motor oil it is necessary to focus on the recommendations of the car manufacturer.

TOTAL QUARTZ 9000 5W40

TOTAL QUARTZ 9000 5W40 oil, created using synthetic technology, is recommended by TOTAL as a motor oil for Peugeot with gasoline and diesel engines, in which are required by ACEA A3/B4, API SN/CF specifications. TOTAL QUARTZ 9000 5W40 has official approval PSA B71 2296. It has high protective properties and protects the engine from wear and harmful deposits even in difficult operating conditions such as stop-and-go city driving, sports driving and cold start. The low-temperature fluidity of this oil guarantees reliable engine starting at temperatures down to -25 degrees, and its resistance to oxidation ensures the stability of its characteristics throughout the entire service interval.

TOTAL QUARTZ 7000 10W40

When changing oil in a used Peugeot, you can use TOTAL QUARTZ 7000 10W40 - this synthetic-based motor oil complies with international standards ACEA A3/B4 and API SN/CF and PSA B71 2294, 2300 standards. Due to its high viscosity, it is best suited for worn-out engines with increased gaps between parts. Due to its high lubricating properties, this oil ensures long engine life and increases its operating efficiency.

TOTAL QUARTZ INEO FIRST 0W30

Low ash motor oil TOTAL QUARTZ INEO FIRST 0W30 meets ACEA C1 and C2 quality standards, and also has PSA approval Peugeot Citroen B71 2312. The automaker uses this oil in Peugeot engines upon first filling and recommends it for after-sales service of the brand's vehicles, in particular models 207, 208, 301, 308, 508, RCZ, 2008, 3008, 4007, 4008, 5008 (subject to compliance level of properties specified in the operating instructions) This oil provides a high degree of protection against wear of engine parts and modern systems exhaust cleaning and, in addition, reduces fuel consumption by up to 4.2% compared to conventional oil (measured in the NEDC test compared to 5W-40 oil according to ACEA A3/B4-08 procedure). Special composition with a reduced content of sulfur, phosphorus and metal-containing components allows the use of TOTAL QUARTZ INEO FIRST 0W30 in diesel vehicles equipped particulate filter(DPF), and its oxidative stability maintains the properties of the oil during the drain intervals recommended by Peugeot.

TOTAL QUARTZ INEO ECS 5W-30

New generation engine oil TOTAL QUARTZ INEO ECS 5W-30 is designed specifically for Peugeot and Citroen cars and is recommended by TOTAL as an oil for Peugeot modifications that require compliance with the PSA B71 2290 standard. This oil belongs to the Low SAPS category, therefore it optimizes the operation of exhaust aftertreatment systems and suitable for diesel cars equipped with a soot filter. According to the results of tests carried out by the European Association of Automobile Manufacturers ACEA, TOTAL QUARTZ INEO ECS 5W-30 provides fuel savings of up to 3.5% compared to the standard (tests carried out on a Citroen C4 1.6 HDi), and the level of protective and cleaning properties of this oil guarantees compliance with it ACEA C2 quality standard.

The French company Peugeot is one of the oldest car manufacturers in the world; the brand's first car with a steam engine was manufactured by Armand Peugeot and Leon Serpollet in 1889. Soon, engineers decided to replace the steam plant with a more efficient internal combustion engine. By the beginning of the 20th century, mass production of Peugeot cars was established, and the company became one of the main automobile enterprises in Europe. It has managed to remain among the leaders of the European automobile market to this day, including thanks to the purchase of Citroen and the formation of the PSA concern in 1975. In addition to Europe, the brand's cars were successfully sold in Africa, South America and Asian countries. Peugeot is also famous for winning the very first automobile race, held in 1894 along the Paris-Rouen route, as well as for further successful performances in rallies, rally raids and endurance racing.

What kind of oil to fill in a Peugeot depends on the model and modification of the car. The French automaker has been working closely with TOTAL since 1995 and recommends TOTAL lubricants for brand vehicles.

Engine size	Model	Volume oils	TOTAL QUARTZ INEO FIRST 0W30	QUARTZ INEO ECS 5W30	TOTAL QUARTZ 9000 5W40	TOTAL QUARTZ 7000 10W40
1.0L	107	3	+	+	+	+
1.0L and 1.2L Vti	208	3,25	+	+	+	+
1.4L and 1.6L Vti/THP	207 / 208 / 308 / 3008 / 5008 / 508/RCZ/Partner	4,25	+	+
1.1 Li and 1.4 Li	1007 / 206 / 206+ / 207 / 307 / Bipper/Partner	3	+ *	+	+	+
1.6 Li	1007 / 206 / 307 / Partner	3,25	+ *	+	+	+
1.6 L e	4008	4,2	+	+	+	+
1.8 Li	407	5			+	+
2.0 Li	206 / 307 / 407 / 807 / Expert	5			+
2.0 L e	4007 / 4008	4,3	+	+	+	+
2.2 Li	407 / 607 / 807	4,25			+	+
2.4 L e	4007	4,5	+	+	+	+
3.0 Li	407 / 607 / 807	4,75		+	+	+
1.3L Hdi	Bipper	3,2		+
1.4L and 1.6L Hdi no PF	307 / 308 / 407 / Bipper / Partner/Expert	3,75	+	+	+	+
1.4L and 1.6L HDi PF	1007 / 206 / 206+ / 207 / 208 / 307 / 308 / 3008 / 4008 / 5008 / 508 / 407 / Partner / Expert	3,75	+	+
1.8 L Hdi	4008	5,3	+	+	+	+
1.9L D	206 / Partner / Expert	4,5		+	+	+
2.0L Hdi no PF	206 / 307 / 407 / 807 / Partner/Expert	4,25 / 4,5 / 4,75/5,25		+	+	+
2.0L Hdi PF	307 / 308 / 3008 / 508 / 5008 / 407 / 807 / RCZ / Expert	4,7 / 5 / 5,25	+ *	+
2.2 L Hdi	4007	5,25		+
2.2 L Hdi PF	407 / 607 / 807 / 508	5,25	+ *	+
2.2L Hdi Euro IV	Boxer	6		+	+	+
2.2L Hdi Euro V	Boxer	6,2		+
2.7L V6 Hdi	407 / 607	5,5		+
3.0L V6 Hdi	407	6,25	+	+
3.0L Hdi Euro IV	Boxer	8,6		+
3.0L Hdi Euro V	Boxer	9		+

* only for models released after 2011

The information in the table is provided for informational purposes: when selecting engine oil, you must rely on the recommendations of the car manufacturer.

TOTAL QUARTZ 9000 5W40

TOTAL QUARTZ 9000 5W40 oil, created using synthetic technology, is recommended by TOTAL as a motor oil for Peugeot gasoline and diesel engines that require ACEA A3/B4, API SN/CF specifications. TOTAL QUARTZ 9000 5W40 is officially approved by PSA B71 2296. It has high protective properties and protects the engine from wear and harmful deposits even in difficult operating conditions such as stop-and-go city driving, sports driving and cold starts. The low-temperature fluidity of this oil guarantees reliable engine starting at temperatures down to -25 degrees, and its resistance to oxidation ensures the stability of its characteristics throughout the entire service interval.

TOTAL QUARTZ 7000 10W40

When changing oil in a used Peugeot, you can use TOTAL QUARTZ 7000 10W40 - this synthetic-based motor oil complies with international standards ACEA A3/B4 and API SN/CF and PSA B71 2294, 2300 standards. Due to its high viscosity, it is best suited for worn-out engines with increased gaps between parts. Due to its high lubricating properties, this oil ensures long engine life and increases its operating efficiency.

TOTAL QUARTZ INEO FIRST 0W30

Low ash motor oil TOTAL QUARTZ INEO FIRST 0W30 meets ACEA C1 and C2 quality standards, and also has the approval of PSA Peugeot Citroen B71 2312. The automaker uses this oil in Peugeot engines when first filling and recommends it for after-sales service of cars of the brand, in particular models 207, 208, 301, 308, 508, RCZ, 2008, 3008, 4007, 4008, 5008 (subject to the level of properties specified in the operating instructions) This oil provides a high degree of protection against wear of engine parts and modern exhaust cleaning systems and, in addition In addition, it reduces fuel consumption by up to 4.2% compared to conventional oil (measured in the NEDC test compared to 5W-40 oil in accordance with ACEA A3/B4-08 procedure). A special composition with a reduced content of sulfur, phosphorus and metal-containing components allows the use of TOTAL QUARTZ INEO FIRST 0W30 in diesel vehicles equipped with a diesel particulate filter (DPF), and its oxidative stability maintains the properties of the oil during the drain intervals recommended by Peugeot.

TOTAL QUARTZ INEO ECS 5W-30

New generation engine oil TOTAL QUARTZ INEO ECS 5W-30 is designed specifically for Peugeot and Citroen cars and is recommended by TOTAL as an oil for Peugeot modifications that require compliance with the PSA B71 2290 standard. This oil belongs to the Low SAPS category, therefore it optimizes the operation of exhaust aftertreatment systems and Suitable for diesel vehicles equipped with a particulate filter. According to the results of tests carried out by the European Association of Automobile Manufacturers ACEA, TOTAL QUARTZ INEO ECS 5W-30 provides fuel savings of up to 3.5% compared to the standard (tests carried out on a Citroen C4 1.6 HDi), and the level of protective and cleaning properties of this oil guarantees compliance with it ACEA C2 quality standard.

Peugeot Partner – commercial vehicle, first introduced in 1996. The car was a sister model to the Citroen Berlingo van. The first generation partner was produced in passenger and cargo versions with 1.4 and 1.6 liter petrol engines. Their power was 75 and 109 hp. With. respectively. Diesels of 1.6 and 2.0 liters (75-90 hp) were also available, as well as a 1.9-liter diesel engine with a power of 69 hp. With. In 2008, the second generation Partner debuted, which is also an analogue of Berlingo, but of the next generation. The model is available in Russia from gasoline engine 1.6 (98 hp), as well as a 90-horsepower diesel engine of the same volume. The most powerful version has a 1.6-liter 120-horsepower unit under the hood.

Regulations for changing oil in internal combustion engines

Experienced motorists and specialists recommend changing the oil in the Peugeot Partner engine every 10-15 thousand km. If you use old engine oil for a long time during vehicle operation, serious technical problems may occur. Let's look at them in more detail:

• There is no time for it in used oil beneficial properties become unusable and do more harm than good. Due to shortage high-quality lubricant a dry friction effect is formed between interacting parts, engine knocking occurs, it overheats and is annoying due to excessive fuel consumption. A major overhaul is also possible.
• Oil dissipates heat less well, the engine overheats, and its components can melt when exposed to critical temperatures.
• There is an accumulation of wear products that spread in the oil channels of the engine, the channels become clogged and the engine fails.

• Original – Total Quartz 9000
• Alternative – Elf 10W-40, Valvoline 10W-40, ACDelco 10W-40

How much engine oil is needed for Peugeot Partner

Generation 1 (1996-2008)

• Engine oil 1.6 – 3.2 l
• Engine oil 1.4 – 3.0 l
• Engine oil 1.8 – 4.25 l
• Engine oil 1.9 – 4.5-4.8 l
• Engine oil 2.0 – 4.5 l