Making a car with your own hands is a task worthy of a real man. Many think, some are taken, only a few are brought to completion. We decided to tell the stories of cars made, as they say, on the knee. We will talk about the work of professional bodywork studios, including A: Level or ElMotors, another time.

The case of the masters of the East

Most homemade people are in the so-called developing countries. Not everyone can afford an expensive car, but everyone wants to. And in these countries they look at copyright, let's say, in a peculiar way, not in a European way.

It's easy to find videos on the Web about a whole factory of "self-made" supercars in Bangkok. These are ten times cheaper than the original. Now it is no longer working: apparently, the German journalists who shot the video about home-made people did them a disservice, and local authorities thought about the missing licenses of the “masters” and the safety of the machines they riveted. Of course, these crafts were not specifically crash tested.

Interestingly, in principle, the Thais withstood supercars - they made space frames from metal profiles and pipes and "dressed" them in fiberglass bodies. In most cases, do-it-yourselfers simply take old cars, cut off the “extra” body panels and hang their own. This technology is used to build, for example, this replica of the Bugatti Veyron from India. An ambitious project, right on the basis of the saying "to love - so the queen, to steal - so a million." The author and owner used an old Honda Civic as a basis. And he tried - outwardly, the copy turned out to be worthy: it is not without reason that the audience is so attentively examining it.

Another Indian, a former actor and current social reformer, concocted a parody of the Veyron from the Honda Accord. It turned out terrible. Another one was based on Tata Nano. Let me remind you that this is officially the cheapest production car in the world with peculiar proportions. Very weak and slow. However, the author of this project is clearly not devoid of a sense of humor, because Veyron, on the contrary, is one of the most expensive, powerful and fastest production cars.

Supercars from junkyards

The Chinese do not lag behind their Thai and Indian counterparts. The young worker of the glass factory, Chen Yanxi, did not parody someone else's design, but made his own, the author's. And even though his car looks decent only from a distance, and drives only 40 km / h (the installed electric motor no longer allows), I don’t want to laugh at Chen. Well done for going your own way. More often it happens otherwise.

Three years ago, 26-year-old Chinese prop designer Li Weilei was so impressed with the Tumbler Batmobile ("Acrobat") from Christopher Nolan's The Dark Knight that he built it. It cost him and four friends 70,000 yuan (about $11,000) and only two months of work. Lee took steel for the body from a landfill, shoveling 10 tons of metal. To help offset the costs, he now rents out his Tumblr for photo and video shoots for just 10 bucks a month. But tenants must be prepared to roll the “replica” manually. The car cannot drive, since it has neither a power unit nor a functional steering wheel. In addition, in China, only cars produced by certified manufacturers are released on the roads.

Another Chinese craftsman, Wang Jian from Jiangsu province, made his own "copy" of the Lamborghini Reventon from an old Nissan minivan and a Volkswagen Santana sedan. And he also dragged metal from the landfill. He spent 60,000 yuan (9.5 thousand dollars) on this business. The car has a carbureted engine, it smokes mercilessly, it lacks an interior and even glass, but the author himself likes the result, and the neighbors believe that Jiang's car copies Lambo quite accurately. The author claims that he is able to accelerate on his supercar up to 250 km / h. No one dares to dissuade him.

As you can see, most of all do-it-yourselfers love to copy Ferrari and Lamborghini. Externally. Inside this car by Mr. Meat from Thailand is a quarter-liter Lifan motorcycle engine.

The most funny and touching creation - the Chinese farmer Guo from Zhengzhou. He made a Lambo for... his grandson. The car has children's dimensions - 900 by 1800 mm and an electric motor that allows you to accelerate to 40 km / h. Batteries of five batteries are enough for 60 km of travel. Guo spent $815 and six months of work on his brainchild.

A Vietnamese car mechanic from the province of Bac Giang created a semblance of a Rolls-Royce, using the "seven" for this. I bought it for 10 million VND (about $500). Another 20 million spent on "tuning". Most of the money went to metal, electrodes, and a Rolls-Royce-style radiator grill ordered from a local workshop. It got rough. But the guy is famous. A real Rolls-Royce Phantom in Vietnam costs about VND 30 billion.

Samavto-2017

In the expanses of the former USSR, traditions of self-building are also strong. In the Soviet years, there was a movement called "samavto", which united enthusiasts of home-made cars and motorcycles. And there were many of them, since in those years it seemed that it was easier to assemble a car with your own hands than to buy it - despite the total shortage of spare parts and bureaucratic obstacles. And what interesting projects were born in those years! Yuna, Pangolina, Laura, Ichthyander and others... Yes, there were people. However, they remained.

A few years ago, I wrote about the brainchild of a Muscovite, Evgeny Danilin, called an SUV that resembles the Hummer H1, but significantly outperforms it.

I immediately recall my old acquaintance with Alexander Timashev from Bishkek. In the 2000s, his ZerDo Design workshop created a whole series of interesting homemade products, the first of which was the Barkhan, also a semblance of a Hammer based on the GAZ-66. Then came the "Mad Cabin" (Mad Cabin), a type of American hot rod, made from the cab of an army truck ZIL-157 - "Zakhara". .

The Crazy Cabin was followed by retro-style homemade products - the so-called replicars, speedster and phaeton. And for them, Kyrgyz craftsmen made not only bodies and interiors, but even frames.

Are you planning to impress others with your car? Unfortunately, this is unlikely to be made into a production model that came off the assembly line of some factory, but a hand-made vehicle will undoubtedly attract the attention of the crowd on the street.

A homemade vehicle can evoke two emotions in those around you - genuine surprise at your skill or an undisguised smile at the sight of the invention. If you delve into the issue of assembling your own car, then there will be nothing complicated in the process. The main thing is to learn more about the main parts and components of the car, to understand the features and properties of the vehicle.

Homemade cars in history

Mass production of homemade cars began in the Soviet Union. Then only certain models were produced on the market, which could not satisfy all the needs of consumers. As a result, self-taught masters appeared who designed their own cars, in accordance with their desires and financial capabilities.

The assembly of a new car was carried out on the basis of failed cars, on average, three non-working ones were required for one home-made car. The craftsmen removed all the necessary spare parts, and introduced them into a new body. By the way, body work was popular in the villages, the old body was specially removed from the car and replaced with a more spacious one.

In addition to functional models, vehicles that were simply attractive from an aesthetic point of view were also created, which could not be distinguished from well-known sports factory copies. Such cars were full-fledged road users.

It is worth noting that until the 80s there was no ban on the design and use of home-made vehicles. After the ban appeared, the inventors had to get out, many of them registered a completely different vehicle with the traffic police, and then used their invention.

How to build your own car

Before starting the assembly, it is necessary to draw up a plan for future work, in which you need to indicate what the car will be like, what features and characteristics it will have. If the car is to be used in the future, it is necessary to purchase high-quality materials and parts, assemble a reliable frame and a body that is resistant to impacts.

Important! Depending on which vehicle you plan to assemble, you will need certain materials. Bolts, wheels and scrap metal in this case are unlikely to be dispensed with.

You can learn about the direct assembly process from the training videos, which are enough on the network.

Drawings of the future car

Imagination and fantasy will help to think over in detail the appearance and device of the future car in your head, however, in order to implement what was conceived in reality, it is necessary to draw up a drawing of the vehicle.

It is better to make two drawings of the car: the first will show a general view, the second - individual components and parts of the vehicle.

Before starting to create a drawing, it is worth preparing a pencil, a ruler, whatman paper and an eraser. First, sketches are made on the sheet with thin lines, which, if necessary, can be easily erased. After all the details are drawn, and the resulting image completely suits you, the drawing is outlined with a thick line.

It is not necessary to draw a drawing on a sheet of paper; modern designers come to the aid of software that greatly facilitates the process of creating a drawing.

Car assembly

In the countries of America and Europe, in the past few years, kit-car kits have become popular, which are a set of various parts that allow you to assemble a car with your own hands. The parts are universal, so how the finished car will turn out depends entirely on the imagination of the owner of the set.

Agree, it's nice to be a car owner. But it is even more pleasant to assemble a cool car with your own hands.

Today we will share information about what you need to assemble a cool car in your garage.

Kit Car or “component car” is a set of parts from which the buyer can assemble the car himself or entrust the assembly to a third party. Kits can vary significantly in terms of configuration, ranging from those in which the complete set + instructions to those in which the set of parts is not complete (that is, for example, you will have to order the engine and transmission separately).

When assembling such a car yourself, it will not hurt you:

• spacious garage;
• a complete set of necessary tools;
• good knowledge in auto mechanics;
• support team in the form of friends who will always help.

The importance of the team is hard to overestimate. For example, the guys in the video below assembled a car in just 7 days!

History of Kit Cars

The basic definition of Kit Car is a car assembled from parts for sale. parts from a specific manufacturer. Most manufacturers tend to sell a complete set of spare parts needed to fully assemble a vehicle. Such kits are usually accompanied by detailed instructions and the model can be assembled in the garage on your own.

Essentially, a Kit Car is just as good as a factory-built car, but by no means can we rule out factors such as efficiency and safety, which largely depend on the person doing the assembly.

The first Kit Car was designed by Englishman Thomas Hyler White in 1896. As you can see, this species took a long time to gain popularity.

By the 1950s, Kit Cars had shifted to second gear and their production increased significantly. And in the 1970s, the real Kit Car began in the UK - a revolution associated with the fact that such cars were not considered a vehicle and were not subject to the corresponding tax. Models such as the Lotus Elan appeared on the market, which could be assembled "at home" without paying tax on the purchase.

Most modern "models to build" are copies of famous cars from the mid-20th century. With bodies made primarily of fiberglass and polyester panels, such models were lighter and easier to handle than a typical factory car.

What is in the box?

If you think: “Is this crazy?” - then think again!

Every year, thousands of assembly kits are sold all over the world. this means that when you read this article, some guys are sitting in their garage and making their own car after work. Kit Cars are relatively cheap and typically cost less than $3,000.

Most companies that sell these kits expect you to come and buy your chosen kit on designated days. Depending on the company you buy the kit from, this gap can vary from 1 to 10 days a year.

Regardless of the model you buy, the basic set will include: chassis, body parts, engine, radiator, transmission, clutch, brakes and shock absorbers. The set comes with a huge bag of nuts and bolts and other parts depending on the type of car you want to build. If you don't have a build guide, then it will be quite difficult to figure it out.

At the next stage, the most important thing is to assemble everything correctly, because people will drive in the assembled car and it is important that the car does not fall apart under them and is safe. Most kits also include an instruction video where you can watch someone build the car.

If the instructions provided by the manufacturer are not enough for you, you can always consult other experienced kit car enthusiasts for specials. forums and resources on the Internet, but it is better to meet them in person (if there are such guys in your city). If you are collecting a car for the first time in your life, then use this option.

Original taken from aslan How to make a legendary car with your own hands.
In search of material for the community, I accidentally stumbled upon a blog in which the author described how he created the car. This was not just any car, but a legendary car with an interesting history - the Mercedes 300SL "Gullwing". I became interested in the history of recreating an automobile rarity and plunged into a fascinating reading about how a copy of the legendary car was made from scratch, and not just a copy, but a car assembled from original parts.
Later, I was able to meet with Sergei, who made his dream come true and learn some details about the creation of the car. He gave me permission to take text and photos from his blog and make a post for the community readers.

In the process of creating the Mercedes 300SL "Gullwing", the suspension from the Mercedes W202 and W107 was used. Remembering that the best is the enemy of the good, we put adjustable shock absorbers. Particular attention should be paid to the rear axle gearbox, usually it is with it that the biggest problems arise, which is why customizers love non-split axles so much. On a Mercedes, this unit, along with the drives, is assembled on a subframe, which greatly simplifies working with it.

The stainless steel exhaust system complies with the Euro 3 standard, and the fuel tank is a real work of art: baffles and overflow pipes are installed in it to prevent the fuel from splashing. In one of the photos - the steering wheel lock

In the Gullwing project, it was decided to use the next generation of M104 engines with a volume of 3.2 liters and a power of 220 hp. paired with an automatic 5-speed transmission. The choice of engine was not accidental - it is more powerful, lighter and quieter. The gearbox is primitive, with a torque converter, many of these units are familiar from the Mercedes W124, W140, W129, W210. A hydraulic booster was also installed, all units are new, so there should be no problems.

We make a body.

Back in 1955, Daimler Benz produced 20 cars with an aluminum body and 1 with a composite body. We decided to try composite.

After the manufacture of the body and assembly of the chassis, the crossing of the body with the frame begins. The process is so painstaking and dreary that no photos and words will convey. Assembly and disassembly, adjustment - all this takes more than one day. Many details are finalized on the spot, and the body is attached to the frame through special dampers with bolts in 30 places.

All body parts are installed and adjusted - doors, hood, trunk lid. There is a lot of trouble with glass - they are mounted on rubber seals, and since all seals are original and designed for steel, you have to strictly observe the thickness of the frames of the openings. Each part is removed, adjusted by hand and only then installed in place.

Many parts for the most popular rare models are still produced in small batches in some workshops, which is actively used by all restorers. But what is there to hide: the factories themselves forge their rarities, especially Audi and Mercedes have succeeded in this.

In many museums there are candid copies. So recently, a lot of "Horkhov" has bred. This is especially interesting, given that all factory documentation was lost during the war. Dozens of workshops on the equipment of those years churn out fakes, passing them off as carefully restored products. The devil is in the details.

So we just bought and collected all the details that could decorate any rarity for 500 thousand euros. I assure you, every nut and bolt (I'm not talking about rubber bands) is correctly marked in 1955. Everything is original, even the seats.

The body has already been primed, and this is the most important point, because the composite is a special material in painting, because plasticizers and all sorts of other complex things are needed here. The secrets of the primer are kept and no one will ever tell you. But it looks nice.

A short video from the painting process

In the meantime, the body is being painted, let's prepare the components for assembly. As I said - the devil is in the details, and there are more than 2 thousand of them in the car! Dashboard, she was looking for a very long time.

We also find devices and relays, of course, not everything turns out right away.

But with enviable patience and perseverance, you will have the opportunity to get a completely authentic instrument panel consisting of 80 (!) Parts.

The main thing is that it also works later: the devices are all expensive. Cheap is not good.

The body is covered in 6 layers of varnish, it is very beautiful and will not need to be pasted over with a chrome film. Yes, shagreen is a must, and the grain should be fine. Now they don’t paint like that anymore, they dilute everything with water, they have ecology, they protect nature. By the way, paint 744 (silver) is the most difficult to paint, any painter will tell you.

They finally married the chassis with the body.

Installed doors. It would seem that the matter is not tricky, but I want to tell you one story. The Mercedes 300SL "Gullwing" had many design flaws. One of them was the doors themselves: they were steel, heavy and hinged to the roof of the body, and were fixed by a spring enclosed between hollow steel tubes with hinges at the end.

In the extreme upper position, the spring was compressed, and when the door was lowered, stretching with a roar, the door slammed shut. When opening, it was necessary to overcome the resistance of the spring, which simply pulled out the door along with the brackets (900 euros each).

Experienced owners of "Gullwing" know that with inept use, this will inevitably lead to deformation of the roof, moreover, the brackets themselves simply break. The stem and spring assembly has become insanely scarce over time, and its cost has risen to astronomical heights. Each owner of such a rarity repairs these units once a season. We decided to go the other way and install gas shock absorbers.

It would seem that something easier, but it was not there. I had to develop the whole assembly, it took 4 months of hard work. Fortunately, there was a workshop that brought ideas and drawings to life. With complete external authenticity, the doors today open like the rear fifth door of a German SUV. The knot turned out to be so successful that it immediately became the object of desire for all owners of rarities, I think that soon all "gullwings" will have doors that open very effectively and smoothly, without knocking. Now this process has really become similar to the flapping of a gull's wing - gracefully and smoothly.
This is just one, and the simplest example of the tasks that had to be solved when building this car.

By the way, the door lock mechanism has also undergone changes. Despite the cost of 1,500 euros, it stuck very often and did not fix the door, but that's another story.

At the very beginning of the project, it seemed that interior trim was the smallest problem, since there are workshops for altering interiors at every step, so what, and now any master can handle leather. The business is to sheathe a bunch of details with leather, but as it turned out, this is a HUGE PROBLEM!
After four attempts to create interior details in tuning studios, I realized that everything is much more complicated.

Created products by no means wanted to look like the original. Everything looked like a cheap fake: the leather was bristling, traces of heat treatment were visible, the texture did not match, and no one could pick up the material. In short, I began to delve into the subtleties and found out that modern masters are completely unable to work with felt, wool and other materials used at that time. They stupidly warmed and stretched the skin, used foam rubber wherever they could, actively worked with an iron, in short, mercilessly destroyed materials, depriving them of their naturalness and nobility. I'm not talking about durability either.

After suffering for half a year, we came to the conclusion that only restorers are capable of such work. They have a special paralon and felt. In general, they found a company, guys - wolves, uncles, under 60 years old, who have been restoring only Mercedes for 40 years. What they showed and told us is just a novel about skin, and they guard their secrets in much the same way as the secret of making paper for the dollar.

The video shows an example of the process.

Interior details for my baby were made for 4 months. The skin is just alive.

I will also add that the skin that manufacturers offer today is chemical bullshit with impregnations. It is not for nothing that all the owners of Mercedes and BMWs go nuts after a year of operation - the salons look like those of old redvans: not fresh, the skin stretches, peels off. As I said earlier, the devil is in the details.

I'm not talking about vinyl, widely used by the Japanese, and by all manufacturers in principle. Now in a Mercedes there is not enough leather even for a jacket, one bullshit, that's why options appear - "designo", "individual", "exclusive". Leading manufacturers, at least for 10-15 thousand dollars, will offer you real leather, but what they sew for you for 50 thousand rubles cannot even be called leather.

Wheels are one of the important parts of a car. So for our handsome man there were two types of wheels. The first were placed on the civilian version.

The latter were offered as an option. They came from sports - real ones, with a central nut. Of course, it is nice to have chrome wheels, but the price of 5 thousand euros per wheel is somewhat annoying.

How then to hit a nut with a hammer, knowing that it is gold? The original disc for the classics is also not cheap - 3 thousand euros. So I think, I really want to save 8 thousand euros.

One of the main factors in the operation of the engine is the removal of exhaust gases (combustion products). I do not want to recall the laws of thermodynamics here, I will only say that for the last 150 years the exhaust pipe has been a symbol of progress. Remember locomotive pipes, steamboats, blast furnaces. Remembering my love for details, I want to assure you that it was the pipe that was given the closest attention. This is a masterpiece of engineering.

The exhaust system is made of stainless steel, which no manufacturer can afford, and is a complex system of thick-walled and thin-walled pipes mounted one into another, which, with the complete authenticity of the appearance of the pipe, solved the problem of "gulving" - noise and heating of the passenger compartment. Well, the main thing is the sound of the exhaust, it's just a song. The problem was solved with the help of resonators installed inside the system.

If you want to understand what kind of car you have - look at the exhaust pipe!

Don't pay attention to the date on the photo, just bought a decent fotik. They snapped it off, but they didn’t figure it out with the instructions, it turned out to be the wrong date. Well, to hell with it, everyone interested, enjoy.

We have made many changes to the design, we try to do everything as authentically as possible. A very clever hand.

With a tank, a separate song, they made their own from stainless steel, slightly changing the location of the neck, but this is a separate story.

There is a good saying - it is better to see once than to read about it a hundred times. Everyone who reads and watches my blog knows my favorite expression - THE DEVIL IS IN THE DETAILS. These are the details that I will show you today. There is no point in writing for a long time, you will understand everything yourself.

Braided harnesses and wiring, well, I think you just haven’t seen this yet, a two-tone horn, in short, just look, all this is called TECHNOLOGIES.

The main task facing the implementation of this project was to create complete authenticity of all interior details. It would seem that it could be easier than copying an existing sample, but as they say, everything is not so simple, and much more difficult than even restoring.

So, we had to make all analog devices work, and work correctly with the electronic units of modern units; stick a bunch of additional equipment into a cramped little car, such as air conditioning, hydraulic booster, brake booster. All this should work from standard toggle switches and switches. The dampers of the stove used to have mechanical drives, as on the Volga Gaz 21, so the stove had to be completely redone. But the biggest problem was the manufacture of the gear selector.

The whole difficulty lay in the fact that the car was originally built for sports, it was small and very low, even the engine had to be placed at an inclination of 30 degrees so as not to break the silhouette of the car. The box was located in the tunnel and had a direct articulated drive.

There was no more than 2 cm of free space between the box and the box itself. I have already said that the car itself was cramped and very noisy, and this problem had to be solved. Since a standard engine-box pair was taken, the task became even more difficult, because the automatic box is much larger in size and has a completely different control principle.

After much torment, a hinge and a linkage system were designed, which made it possible to completely imitate this assembly, which can be easily seen by looking at the original.

Well, the most interesting: if you carefully study the photos, you will see that the seats are much lower than the original, this is also a trick. The fact is that the car was so cramped that a person with a height of 180 cm rested his head on the roof and was forced to sit hunched over at the steering wheel, but I like to drive with straight arms, so I had to change the angle of the steering column to ensure comfort and not disrupt the overall look. How this was achieved is a novel, from the manufacture of the unique sled to the alteration of the floor and seats.

I'm not the first to decide to recreate the legendary car. Back in the late 70s, similar attempts were made in America, with Tony Ostermeier, a former mechanical engineer from Gardena, the furthest advanced. He managed to build about 15 cars in 10 years using units from Mercedes of those years. Today, these machines are themselves rarities.

I saw them, of course they are not as high quality products as we would like, but this is the best thing that has been done. In the 90s, there were attempts by the American company "Speedster" using the Tony matrix to implant it on the components of the "Chevrolet Corvette C03". Only 2 cars were made. One of them is now in Ukraine, and the other in Moscow. The cars were sold for $150,000.

Actually, that's all. True, there were attempts to put shells on the SL and many more high-profile statements, but all this is zilch, people ran ahead of the locomotive, as with our yo-mobile: there is nothing yet, but 40 thousand applications have already been submitted.

By the way, working with a composite is very difficult. Only its high-quality painting costs about 10 thousand euros. Well, and most importantly: FORGING AND COPYING ARE TWO BIG DIFFERENCES.

They say that everything in the car should be perfect, both the engine and the trunk. On the first car, they decided to use gas shock absorbers to open and fix the trunk lid.

We redesigned the filler neck a little, reasonably considering that if it would fit tightly to the trunk lid. this will reduce the risk of spreading the smell of gasoline inside the passenger compartment in the event of a spill.

I didn't like the idea. On this machine, they made it closer to the original, changing only the shape of the filler neck (a steel funnel around the cap should prevent fuel from spilling onto the Carpet).

Of course, it could not have done without a collective farm: they built a leather condom around the filler neck. It seems to look nice, and they abandoned the shock absorbers, putting the native mechanism (stick) for fixing the trunk lid. Of course, it was possible to get confused with springs, as on modern cars, but it seems to me that this will kill the very spirit of the machine. The open trunk looks great.

And yes, the back looks great. Considering that today everyone already uses tubeless tires, we decided to free up space by placing a stowaway in the trunk instead of a standard wheel. Now at least there is a place to throw a string bag.

Actually, the case is inexorably moving towards its logical conclusion. Of course, it's nice that everything ends so quickly, it remains to smear with a movilchik and stick the wheels.

The wheels are temporary so as not to spoil the original.

That's basically it!

Let's go around the car.

I can only add one thing: before you start doing something, think carefully about whether you have enough strength to finish what you started.

After arriving in Russia.

Video from inside the recreated car.

In this video, you can see how the Germans are restoring the hero of the report, the same "gullwing".

Click the button to subscribe to How It's Made!

Subscribe also to our groups in facebook, vkontakte,classmates and in google+plus, where the most interesting things from the community will be posted, plus materials that are not here and a video about how things work in our world.

Click on the icon and subscribe!

There is no limit to perfection. This saying is well known to everyone and everyone. And any car owner strives to make perfection out of his car. For many drivers, factory settings are not enough. They want to bring something of their own. Something that will set them apart from the rest. But what if what you want is not available in the store? There is only one way out: you can not buy - do it yourself.

They have become very popular lately. They improve the appearance of the car, change some technical characteristics or bring nice additions to the options. Among the variety of possible alterations, we propose to consider several options.

car wash

Let's start with the appearance. When a car is clean, its paintwork is shiny and sparkling. It's nice to see this kind of technology. Immediately there is a feeling that the owner is watching his car. But going to the car wash is not always possible for various reasons. In such cases, homemade products for the car will come to the rescue. With your own hands, you can assemble a small sink, which can be used at any convenient time.

To make a sink, you will need the following parts:

• canister with two plums;
• hose 2 m long (suitable for connecting a washing machine);
• watering gun with telescopic rod;
• Union;
• spool;
• rubber gasket (outer diameter 2.4 cm, inner diameter 1.5 cm);
• coupling.

And now let's get started:

1. We make a hole in the lid of the canister. We smear the “spool” with sealant and insert it into the prepared hole in the cover. Let's dry.
2. In the second cover we make a small hole. It is necessary for the junction of the cover and the coupling is treated with sealant and also allowed to dry.
3. From the curved end of the inlet hose, cut off the nut with the fastener. Mounting is no longer needed. We apply sealant to the nut and fasten it to the back of the coupling. We connect the hose with the cut side to the nut of the quick-release fitting. Next, the main fitting is twisted, which is also connected to the watering gun.
4. On the other side of the hose, insert the rubber gasket into the nut. This will protect the system from air ingress. After that, the nut is screwed onto the quick-release fitting.

This completes the process of making a homemade car for a car with your own hands.

Seat upholstery

Homemade products can also be useful to update the interior. Useful accessories and crafts for cars allow you to replace worn parts, add lighting to the interior and do much more. Consider the option of how to upgrade the seats.

This will require fabric. You can choose two colors - for the central part of the seats, the back of the back will fit beige leather (it will take about 4 m), and everything else will be black. Black leather needs about 3.5 m. The entire fabric needs to be duplicated (glued) with a layer of foam rubber 0.5 cm. The foam rubber is glued with interlining using an iron. This will make it easier to work with him.

From the removed seats (it’s more convenient), we remove the covers. We number their individual parts. In order not to get confused, we transfer everything to paper. Also on paper, you need to mark the places where the knitting needles are attached (they are on the back of the covers). The spokes themselves will then be inserted into new covers.

Next, we disassemble the skin into separate parts (we dissolve the seams). Get patterns of the necessary elements. We lay them out on the wrong side of the fabric (wrong side up, so that the mirror image of the details does not work out) on thick paper (it is possible on wallpaper) and circle around the perimeter. Leave a 1 cm allowance around the edges for seams. Then all patterns are cut and sewn (starting from the center). On the reverse side of any fabric we make pockets where the knitting needles are inserted.

Having connected all the details, we get new covers. We do this process in turn for all the seats. Having made such interesting and useful homemade products for a car with your own hands, you can update the interior without contacting a service.

Ceiling renovation

You can also replace the lining on the ceiling with your own hands. Homemade for the car in this case, you must start by removing the ceiling. This can take quite a lot of time. Fastening in each case individually. There is nothing complicated, the main thing is to carefully examine everything and check that all the details remain intact.

When the ceiling panel is removed, the old fabric is removed from it. When preparing the material for the ceiling, you need to remember one important point: on the wrong side, it should have a small layer of foam rubber. The fabric is glued with heat-resistant glue. When the glue dries, the panel can be installed back on the ceiling. Do it in reverse order.

"Angel Eyes"

It is quite possible to collect electronic useful homemade products for cars with your own hands. For example, "angel eyes" will update the headlights of any car. To make them you will need:

• plastic transparent sticks (can be from blinds);
• resistors (220 Ohm);
• battery (9 V);
• LEDs (3.5 V).

The process looks like this:

1. On any metal can, the same diameter as the headlights, we wind a ring of plastic sticks with pliers. To do this, it is slightly heated.
2. Next, connect a pair of LED and resistor. Their performance is checked with a battery.
3. Another LED is connected to it.
4. On a frozen ring made of plastic sticks, we make deep cuts.
5. We collect the ring, attach the LEDs, connect.

Conclusion

Do-it-yourself homemade products for a car can be assembled by everyone. The main thing is to be confident in your abilities. A little information from our article, a little bit of our reasoning and thoughts, and everything will work out. And the car will only get better. And it's doubly nice that it's handmade.